Power chip

3-Pin or 8-Pin 100mA Adjustable Positive Voltage Regulator 3-SOT-89 0 to 125

-

TB67S109AFNAG stepper motor driver

-

The NCP1251 is a highly integrated PWM controller capable of providing robust high performance off-line power within a very small TSOP-6 encapsulation. The controller has a supply range up to 28 V, has a dithered 65 kHz or 100 kHz switching circuit, and operates under peak current mode control. When the power on the auxiliary side starts to decrease, the controller automatically folds back its switching frequency to a minimum of 26 kHz. As the power drops further, the part enters a skip cycle while limiting the peak current. Overpower protection (OPP) is a difficult measure, especially when no-load standby requirements drive converter specifications. ON Semiconductor's proprietary integrated OPP allows you to take full advantage of the highest power available with only two external resistors, without compromising standby performance. Combined latched overvoltage protection (OVP) on the same pin. To simplify implementation, the auto-recovery OVP also monitors the Vcc line. These features provide effective protection in the event of optocoupler failure or reverse switching operation. Finally, timer-based short-circuit protection provides the best protection scheme, allowing you to precisely select the protection trip point regardless of the loose coupling between the auxiliary winding and the mains winding.

Single Output LDO, 800mA, Fixed and Adjustable Voltage, Internal Current Limit, Thermal Protection 8-SON 0 to 125

Function Type: Step-Down Output Type: Fixed Input Voltage: 4V~40V Output Voltage: 5.0V Output Current (Maximum): 3A

Input Voltage (Nominal) 12 Output Voltage (VDC) 12 Minimum Current (mA) 0 Maximum Current (mA) 167 Full Load Efficiency (%) 87 Maximum Capacitive Load (uF) 820