Logic device/transceiver/encoder

Číslo dílu
TI (Texas Instruments)
Výrobci
Popis
64711 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
Popis
57591 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
4-Channel, 2-Input, 2V to 5.5V NOR Gate 14-SOIC -40 to 125
Popis
89031 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
4-Channel, 4-Input, 2V to 6V NAND Gate with Schmitt Trigger Inputs 14-SOIC -40 to 85
Popis
91329 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
4-Channel, 2-Input, 3V to 5.5V OR Gate 16-SOIC -40 to 85
Popis
76471 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
4-Channel, 2-Input, 3V to 18V NAND Gate 14-TSSOP -55 to 125
Popis
60630 PCS
Na skladě
Číslo dílu
rochester
Výrobci
Popis
63583 PCS
Na skladě
Číslo dílu
ADI
Výrobci
Popis
68748 PCS
Na skladě
Číslo dílu
Nexperia
Výrobci
Popis
56169 PCS
Na skladě
Číslo dílu
onsemi (Ansemi)
Výrobci
MM74HCT573 Octal D-type Latch and MM74HCT574 Octal D-type Flip-Flop are manufactured with advanced silicon gate CMOS technology, which has the inherent advantages of low power consumption and wide power supply range, and has LS-TTL input and output characteristics, and realizes pin output compatible. The 3-state outputs can drive 15 LS-TTL loads. All inputs are protected from electrostatic discharge damage by internal diodes to VCC and ground. When the MM74HCT573 latch enable input is high, the Q output will follow the D input. When Latch Enable goes low, the data at the D input remains at the output until Latch Enable goes high again. When a high logic level is applied to the output control input, all outputs go into a high impedance state, regardless of what signals are present at the other inputs and the state of the storage element. The MM74HCT574 is a rising edge triggered flip-flop. Data on the D input that meets setup and hold time requirements is transferred to the Q output on a positive-going transition of the clock (CK) input. When a high logic level is applied to the output control (OC) input, all outputs go into a high-impedance state, regardless of the signals present at the other inputs and the state of the storage elements. The MM74HCT device is suitable for interfacing between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.
Popis
83673 PCS
Na skladě
Číslo dílu
onsemi (Ansemi)
Výrobci
Popis
95769 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
Octal Bus Transceiver 20-SSOP 0 to 70
Popis
84156 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
Octal Bus Transceiver and Registers with 3-State Outputs 24-TSSOP -40 to 85
Popis
90163 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
16-Bit Transparent D-Latch with 3-State Output 48-TVSOP -40 to 85
Popis
52214 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
Popis
85670 PCS
Na skladě
Číslo dílu
TI (Texas Instruments)
Výrobci
IEEE Std 1149.1 (JTAG) Boundary-Scan Test Set 24-SOIC 0 to 70 with Octal Bus Transceivers
Popis
54209 PCS
Na skladě
Číslo dílu
ADI/MAXIM (MAXIM)
Výrobci
Popis
85798 PCS
Na skladě
Číslo dílu
ADI/MAXIM (MAXIM)
Výrobci
Popis
93941 PCS
Na skladě
Číslo dílu
ADI/MAXIM (MAXIM)
Výrobci
Popis
63060 PCS
Na skladě
Číslo dílu
NXP (NXP)
Výrobci
Popis
58949 PCS
Na skladě