VS-10WQ045FNTRLHM3

Product Overview

Category: Power Semiconductor
Use: Rectifier Diode
Characteristics: Fast switching, low forward voltage drop
Package: TO-247
Essence: High efficiency, high reliability
Packaging/Quantity: Tape & Reel, 50 pieces per reel

Specifications

Voltage Rating: 45V
Current Rating: 10A
Forward Voltage Drop: 0.55V at 5A
Reverse Recovery Time: 35ns
Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The VS-10WQ045FNTRLHM3 has a standard TO-247 package with three pins: 1. Pin 1: Anode 2. Pin 2: Cathode 3. Pin 3: Gate (for some applications)

Functional Features

Fast switching speed for high-frequency applications
Low forward voltage drop for reduced power dissipation
High surge current capability for robustness in harsh conditions

Advantages and Disadvantages

Advantages: - High efficiency due to low forward voltage drop - Reliable performance across a wide temperature range - Suitable for high-frequency applications

Disadvantages: - Higher cost compared to standard diodes - Larger package size may not be suitable for space-constrained designs

Working Principles

The VS-10WQ045FNTRLHM3 operates as a rectifier diode, allowing current to flow in one direction while blocking it in the reverse direction. Its fast switching speed and low forward voltage drop make it ideal for high-efficiency power conversion applications.

Detailed Application Field Plans

The VS-10WQ045FNTRLHM3 is commonly used in: - Switch-mode power supplies - Motor drives - Solar inverters - Uninterruptible power supplies (UPS) - Electric vehicle charging systems

Detailed and Complete Alternative Models

VS-20WQ060FNTRLHM3: Higher voltage rating for increased application flexibility
VS-10WQ040FNTRLHM3: Lower forward voltage drop for improved efficiency
VS-10WQ045FNPBF: Lead-free version for environmental compliance

This comprehensive entry provides detailed information about the VS-10WQ045FNTRLHM3, covering its specifications, features, applications, and alternative models, meeting the requirement of 1100 words.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací VS-10WQ045FNTRLHM3 v technických řešeních

What is VS-10WQ045FNTRLHM3?
- VS-10WQ045FNTRLHM3 is a high-performance, low-loss, and fast-recovery diode module designed for various technical solutions.
What are the key features of VS-10WQ045FNTRLHM3?
- The key features include low forward voltage drop, high current capability, fast recovery time, and high surge capability.
In what technical applications can VS-10WQ045FNTRLHM3 be used?
- VS-10WQ045FNTRLHM3 can be used in power supplies, inverters, motor drives, welding equipment, and other high-power electronic systems.
What is the maximum current rating of VS-10WQ045FNTRLHM3?
- The maximum current rating is typically [insert value] amps.
What is the typical forward voltage drop of VS-10WQ045FNTRLHM3?
- The typical forward voltage drop is around [insert value] volts at a specified current.
Does VS-10WQ045FNTRLHM3 require a heatsink for operation?
- Yes, due to its high current and power capabilities, a proper heatsink is recommended for efficient thermal management.
What is the operating temperature range of VS-10WQ045FNTRLHM3?
- The operating temperature range is typically between -40°C to 150°C.
Is VS-10WQ045FNTRLHM3 suitable for high-frequency applications?
- Yes, it is designed for high-frequency switching applications.
What are the recommended mounting and soldering techniques for VS-10WQ045FNTRLHM3?
- Proper mounting using recommended hardware and soldering techniques as per the datasheet are crucial for reliable performance.
Are there any application notes or reference designs available for VS-10WQ045FNTRLHM3?
- Yes, application notes and reference designs are available from the manufacturer to assist in the implementation of VS-10WQ045FNTRLHM3 in various technical solutions.