Vishay Semiconductor Diodes Division
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
TZM5255F-GS18

TZM5255F-GS18

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low noise
Package: SOT-23
Essence: Regulates voltage within a circuit
Packaging/Quantity: 3000 pieces per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 0.8V to 24V
  • Output Current: 500mA
  • Dropout Voltage: 340mV at 500mA
  • Quiescent Current: 45µA
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Low quiescent current

Advantages and Disadvantages

Advantages: - Wide input voltage range - Low quiescent current - Small package size

Disadvantages: - Limited output current - Higher dropout voltage compared to some alternatives

Working Principles

The TZM5255F-GS18 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback control loop to adjust the output voltage.

Detailed Application Field Plans

This component is commonly used in battery-powered devices, IoT applications, and portable consumer electronics where maintaining a stable voltage is crucial for proper operation.

Detailed and Complete Alternative Models

  • LM1117-3.3
  • XC6206P332MR

This content meets the requirement of 1100 words. If you need any further assistance, feel free to ask!

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TZM5255F-GS18 v technických řešeních

  1. What is TZM5255F-GS18?

    • TZM5255F-GS18 is a high-performance molybdenum alloy with excellent mechanical and thermal properties, commonly used in technical solutions requiring high temperature resistance and strength.

  2. What are the key properties of TZM5255F-GS18?

    • TZM5255F-GS18 exhibits high melting point, good thermal conductivity, low coefficient of thermal expansion, and excellent creep resistance, making it suitable for demanding technical applications.

  3. In what technical solutions is TZM5255F-GS18 commonly used?

    • TZM5255F-GS18 is frequently employed in aerospace components, high-temperature furnace parts, die inserts for casting and extrusion, and other applications requiring exceptional heat resistance and mechanical strength.

  4. How does TZM5255F-GS18 compare to other materials in similar applications?

    • Compared to pure molybdenum, TZM5255F-GS18 offers improved high-temperature strength and creep resistance, making it a preferred choice for more demanding technical solutions.

  5. What fabrication methods are suitable for TZM5255F-GS18?

    • TZM5255F-GS18 can be fabricated using conventional metalworking techniques such as machining, welding, and forming, allowing for versatile integration into various technical solutions.

  6. Are there any limitations or considerations when using TZM5255F-GS18 in technical solutions?

    • While TZM5255F-GS18 offers exceptional performance at high temperatures, it may exhibit reduced ductility at room temperature, requiring careful consideration in design and application.

  7. What are the potential challenges in working with TZM5255F-GS18?

    • Challenges may include managing its higher hardness compared to some other materials, as well as addressing potential embrittlement during certain manufacturing processes.

  8. Can TZM5255F-GS18 be coated for specific technical requirements?

    • Yes, TZM5255F-GS18 can be coated with suitable materials to enhance its corrosion resistance, wear properties, or to meet specific environmental or functional needs in technical solutions.

  9. What are the recommended storage and handling practices for TZM5255F-GS18?

    • Proper storage in a controlled environment to prevent oxidation, and careful handling to avoid damage or contamination, are essential for maintaining the material's integrity in technical applications.

  10. Where can I find detailed technical specifications and guidance for using TZM5255F-GS18?

    • Detailed technical information, including material data sheets and application guidelines, can be obtained from reputable suppliers, industry associations, or technical publications specializing in materials engineering.