SA6.5CA-E3/73

Product Overview

Use

It is used for surge protection in electronic circuits.

Characteristics

Fast response time
Low clamping voltage
High surge current capability

Package

SA6.5CA-E3/73 is available in a DO-15 package.

Essence

The essence of this product lies in its ability to protect electronic circuits from voltage surges and transients.

Packaging/Quantity

It is typically packaged in reels containing 1000 units.

Specifications

Peak Pulse Power: 500 W
Breakdown Voltage: 6.5 V
Maximum Clamping Voltage: 11.2 V
Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The SA6.5CA-E3/73 has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

Provides transient voltage suppression
Fast response to transient events
Low leakage current

Advantages

Protects sensitive electronic components
Fast reaction time
Low clamping voltage

Disadvantages

Limited surge current capability
May require additional protection for high-energy transients

Working Principles

When a voltage surge occurs, the SA6.5CA-E3/73 conducts the excess current to ground, limiting the voltage across the protected circuit.

Detailed Application Field Plans

SA6.5CA-E3/73 is commonly used in: - Telecommunication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to SA6.5CA-E3/73 include: - SA5.0CA-E3/73 - SA7.0CA-E3/73 - SA8.0CA-E3/73

In conclusion, SA6.5CA-E3/73 is a semiconductor device designed to provide surge protection in various electronic applications. Its fast response time, low clamping voltage, and high surge current capability make it a reliable choice for safeguarding sensitive circuits against voltage transients.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací SA6.5CA-E3/73 v technických řešeních

What is SA6.5CA-E3/73?
- SA6.5CA-E3/73 is a type of diode, specifically a transient voltage suppressor diode, commonly used for overvoltage protection in electronic circuits.
What are the key specifications of SA6.5CA-E3/73?
- The key specifications include a peak pulse power of 600W, a breakdown voltage of 6.5V, and a low clamping voltage.
How is SA6.5CA-E3/73 typically used in technical solutions?
- SA6.5CA-E3/73 is often used to protect sensitive electronic components from voltage spikes and transients, such as in power supplies, communication equipment, and automotive electronics.
What are the advantages of using SA6.5CA-E3/73 in technical solutions?
- The diode offers fast response time, low clamping voltage, and high surge capability, providing effective protection against voltage surges and transients.
Are there any limitations or considerations when using SA6.5CA-E3/73?
- It's important to consider the maximum current handling capability and ensure proper heat dissipation to prevent overheating during prolonged overvoltage events.
Can SA6.5CA-E3/73 be used in combination with other protective components?
- Yes, it can be used in conjunction with other protective devices such as varistors, gas discharge tubes, or other transient voltage suppressors for enhanced protection.
What are the typical failure modes of SA6.5CA-E3/73?
- Common failure modes include thermal runaway due to excessive current, degradation of clamping voltage over time, and physical damage from sustained overvoltage events.
How does SA6.5CA-E3/73 compare to similar diodes in terms of performance and cost?
- SA6.5CA-E3/73 offers a balance of performance and cost-effectiveness compared to similar diodes, making it a popular choice for many applications.
Are there any specific layout or mounting considerations for SA6.5CA-E3/73?
- It's important to minimize lead lengths, provide adequate PCB traces for current handling, and ensure proper thermal management for reliable operation.
Where can I find detailed application notes or guidelines for using SA6.5CA-E3/73 in technical solutions?
- Detailed application notes and guidelines can typically be found in the datasheet provided by the manufacturer, offering specific recommendations for circuit design and implementation.