Vishay Semiconductor Diodes Division
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
EGP31G-E3/D
Zobrazit detail DataSheets

EGP31G-E3/D

Product Overview

Category

The EGP31G-E3/D belongs to the category of semiconductor devices.

Use

It is used as a fast recovery rectifier for general purposes.

Characteristics

  • Fast recovery time
  • High reliability
  • Low forward voltage drop

Package

The EGP31G-E3/D comes in a DO-214AC (SMA) package.

Essence

This product is essential for converting alternating current (AC) to direct current (DC) in various electronic circuits.

Packaging/Quantity

The EGP31G-E3/D is typically packaged in reels and available in varying quantities depending on the supplier.

Specifications

  • Maximum Average Forward Current: 3A
  • Reverse Voltage: 400V
  • Forward Voltage: 1.35V
  • Reverse Recovery Time: 35ns

Detailed Pin Configuration

The EGP31G-E3/D has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.

Functional Features

  • Fast recovery time for efficient operation
  • Low forward voltage drop for reduced power loss
  • High reliability for consistent performance

Advantages

  • Efficient conversion of AC to DC
  • Reliable performance
  • Low power loss

Disadvantages

  • Limited maximum average forward current
  • Higher reverse voltage may not be suitable for high-power applications

Working Principles

The EGP31G-E3/D operates by allowing current to flow in one direction while blocking it in the opposite direction, enabling the conversion of AC to DC.

Detailed Application Field Plans

The EGP31G-E3/D is commonly used in: - Power supplies - Battery chargers - LED lighting - Motor drives

Detailed and Complete Alternative Models

Some alternative models to the EGP31G-E3/D include: - EGP30G-E3/D - EGP32G-E3/D - EGP40G-E3/D

In conclusion, the EGP31G-E3/D is a reliable and efficient fast recovery rectifier that finds widespread use in various electronic applications due to its fast recovery time, low forward voltage drop, and high reliability.

[Word count: 271]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací EGP31G-E3/D v technických řešeních

  1. What is the EGP31G-E3/D?

    • The EGP31G-E3/D is a high-performance, low VF Schottky diode designed for applications requiring low forward voltage drop and fast switching.

  2. What are the key features of the EGP31G-E3/D?

    • The key features include low forward voltage drop, high current capability, fast switching speed, and a small form factor.

  3. What are the typical applications of the EGP31G-E3/D?

    • Typical applications include power supplies, LED lighting, reverse polarity protection, and freewheeling diodes in motor control circuits.

  4. What is the maximum forward voltage drop of the EGP31G-E3/D?

    • The maximum forward voltage drop is typically around 0.55V at a forward current of 3A.

  5. What is the maximum reverse voltage rating of the EGP31G-E3/D?

    • The maximum reverse voltage rating is 30V.

  6. What is the operating temperature range of the EGP31G-E3/D?

    • The operating temperature range is typically -65°C to +125°C.

  7. Does the EGP31G-E3/D require a heatsink in high-power applications?

    • It depends on the specific application and power dissipation requirements. In some high-power applications, a heatsink may be necessary.

  8. Can the EGP31G-E3/D be used in automotive applications?

    • Yes, the EGP31G-E3/D is suitable for use in automotive electronics such as LED lighting and power management systems.

  9. What are the packaging options available for the EGP31G-E3/D?

    • The EGP31G-E3/D is available in a variety of surface mount packages including SOD-123, SMA, and SMB.

  10. Are there any recommended layout considerations when using the EGP31G-E3/D in a PCB design?

    • Yes, it's important to minimize trace lengths and keep the diode close to the load to reduce parasitic inductance and ensure optimal performance.