Vishay Semiconductor Diodes Division
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
BZX85B2V7-TAP
Zobrazit detail DataSheets

BZX85B2V7-TAP

Introduction

The BZX85B2V7-TAP is a voltage regulator diode that belongs to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Devices
  • Use: Voltage Regulation
  • Characteristics: Zener Diode, 2.7V Nominal Voltage, Low Leakage Current
  • Package: TAP Package
  • Essence: Voltage Regulation
  • Packaging/Quantity: Available in Tape and Reel Packaging

Specifications

  • Nominal Voltage: 2.7V
  • Power Dissipation: 1.3W
  • Zener Test Current: 20mA
  • Operating Temperature Range: -65°C to +200°C
  • Storage Temperature Range: -65°C to +200°C

Detailed Pin Configuration

The BZX85B2V7-TAP has a standard diode package with two leads. The anode is connected to one lead, and the cathode is connected to the other lead.

Functional Features

  • Voltage Regulation: Provides a stable output voltage of 2.7V.
  • Zener Effect: Exhibits the Zener effect, allowing it to maintain a constant voltage across its terminals.

Advantages and Disadvantages

Advantages

  • Precise Voltage Regulation
  • Low Leakage Current
  • High Power Dissipation

Disadvantages

  • Limited Voltage Range
  • Sensitivity to Temperature Changes

Working Principles

The BZX85B2V7-TAP operates based on the Zener effect, which causes it to maintain a nearly constant voltage across its terminals when reverse-biased at the specified voltage.

Detailed Application Field Plans

The BZX85B2V7-TAP is commonly used in the following applications: 1. Voltage Regulation in Power Supplies 2. Overvoltage Protection Circuits 3. Signal Clipping Circuits

Detailed and Complete Alternative Models

Some alternative models to the BZX85B2V7-TAP include: - BZX85C2V7-TAP: Offers a higher voltage rating of 2.7V - BZX85B3V0-TAP: Provides a different nominal voltage of 3.0V - BZX85B2V4-TAP: Offers a lower nominal voltage of 2.4V

In conclusion, the BZX85B2V7-TAP is a semiconductor device that serves as a reliable voltage regulator with specific characteristics and applications. Its precise voltage regulation and low leakage current make it suitable for various electronic circuits requiring stable voltage references.

[Word Count: 366]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací BZX85B2V7-TAP v technických řešeních

  1. What is the maximum power dissipation of BZX85B2V7-TAP?

    • The maximum power dissipation of BZX85B2V7-TAP is 1.3W.

  2. What is the voltage rating of BZX85B2V7-TAP?

    • BZX85B2V7-TAP has a voltage rating of 2.7V.

  3. What is the tolerance of BZX85B2V7-TAP?

    • The tolerance of BZX85B2V7-TAP is ±5%.

  4. What is the operating temperature range for BZX85B2V7-TAP?

    • The operating temperature range for BZX85B2V7-TAP is -65°C to +175°C.

  5. What is the package type of BZX85B2V7-TAP?

    • BZX85B2V7-TAP comes in a DO-41 package.

  6. Can BZX85B2V7-TAP be used for voltage regulation?

    • Yes, BZX85B2V7-TAP can be used for voltage regulation in various technical solutions.

  7. Is BZX85B2V7-TAP suitable for overvoltage protection?

    • Yes, BZX85B2V7-TAP is suitable for overvoltage protection applications.

  8. What are the typical applications of BZX85B2V7-TAP?

    • Typical applications of BZX85B2V7-TAP include voltage stabilization, overvoltage protection, and general-purpose regulation.

  9. What is the reverse leakage current of BZX85B2V7-TAP?

    • The reverse leakage current of BZX85B2V7-TAP is typically 5µA at 2.7V.

  10. Can BZX85B2V7-TAP be used in automotive electronics?

    • Yes, BZX85B2V7-TAP is suitable for use in automotive electronics due to its wide operating temperature range and voltage regulation capabilities.