1N5246C-TAP

Product Overview

The 1N5246C-TAP belongs to the category of Zener diodes, which are semiconductor devices designed to maintain a fixed voltage across their terminals. These diodes find applications in voltage regulation and protection circuits due to their unique characteristics. The 1N5246C-TAP is commonly used in electronic circuits where a stable voltage reference is required.

Basic Information

Category: Zener Diode
Use: Voltage regulation and protection
Characteristics: Fixed voltage output, low dynamic impedance
Package: TAP package
Essence: Provides stable voltage reference
Packaging/Quantity: Typically available in reels or tubes

Specifications

Voltage: 16V
Power Dissipation: 500mW
Zener Voltage Tolerance: ±5%
Operating Temperature Range: -65°C to +200°C

Detailed Pin Configuration

The 1N5246C-TAP has two pins, with the cathode being connected to the semiconductor's N-type material and the anode to the P-type material.

Functional Features

Stable Voltage Output: Maintains a constant voltage across its terminals.
Low Dynamic Impedance: Ensures minimal variation in voltage under changing load conditions.

Advantages and Disadvantages

Advantages

Precise voltage regulation
Compact size
Low cost

Disadvantages

Limited power dissipation capability
Susceptible to damage from overvoltage conditions

Working Principles

The 1N5246C-TAP operates based on the principle of the Zener effect, where it maintains a nearly constant voltage drop across its terminals when reverse-biased at its specified breakdown voltage.

Detailed Application Field Plans

The 1N5246C-TAP is widely used in various electronic circuits, including: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits

Detailed and Complete Alternative Models

Some alternative models to the 1N5246C-TAP include: - 1N4730A-TAP - BZX55C16-TAP - 1N5226B-TAP

In conclusion, the 1N5246C-TAP Zener diode offers precise voltage regulation and finds extensive use in electronic circuits requiring stable voltage references. While it has limitations in power dissipation and susceptibility to overvoltage, its compact size and cost-effectiveness make it a popular choice for various applications.

Word Count: 345

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 1N5246C-TAP v technických řešeních

Sure, here are 10 common questions and answers related to the application of 1N5246C-TAP:

What is the voltage rating of 1N5246C-TAP?
- The voltage rating of 1N5246C-TAP is 16 volts.
What is the maximum power dissipation of 1N5246C-TAP?
- The maximum power dissipation of 1N5246C-TAP is 500 milliwatts.
What is the forward voltage drop of 1N5246C-TAP?
- The forward voltage drop of 1N5246C-TAP is typically 1 volt at a forward current of 20 mA.
What is the reverse leakage current of 1N5246C-TAP?
- The reverse leakage current of 1N5246C-TAP is typically 5 µA at its maximum reverse voltage.
Can 1N5246C-TAP be used in voltage regulation applications?
- Yes, 1N5246C-TAP can be used as a voltage regulator in various technical solutions.
What are the typical applications of 1N5246C-TAP?
- Typical applications of 1N5246C-TAP include voltage regulation, overvoltage protection, and general purpose diode applications.
Is 1N5246C-TAP suitable for use in automotive electronics?
- Yes, 1N5246C-TAP is suitable for use in automotive electronics due to its reliability and performance.
What is the temperature coefficient of 1N5246C-TAP?
- The temperature coefficient of 1N5246C-TAP is typically 0.07% per °C.
Can 1N5246C-TAP be used in low-power electronic circuits?
- Yes, 1N5246C-TAP is suitable for use in low-power electronic circuits due to its low power dissipation.
Does 1N5246C-TAP require a heat sink for certain applications?
- Depending on the specific application and power dissipation, a heat sink may be required for 1N5246C-TAP to ensure optimal performance and reliability.

I hope these questions and answers provide the information you were looking for! If you have any more questions, feel free to ask.