Vishay Semiconductor Diodes Division
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
1.5KE10AHE3_A/C
Zobrazit detail DataSheets

1.5KE10AHE3_A/C

Product Category

The 1.5KE10AHE3_A/C belongs to the category of transient voltage suppressor diodes.

Basic Information Overview

  • Use: These diodes are used to protect sensitive electronics from voltage spikes and transients.
  • Characteristics: They have a high surge capability, fast response time, and low clamping voltage.
  • Package: The 1.5KE10AHE3_A/C is available in a DO-201 package.
  • Essence: The essence of these diodes lies in their ability to divert excessive current away from sensitive components.
  • Packaging/Quantity: They are typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Rating: 10V
  • Power Dissipation: 1500W
  • Breakdown Voltage: 11.1V to 12.3V
  • Operating Temperature: -55°C to 175°C

Detailed Pin Configuration

The 1.5KE10AHE3_A/C has a standard axial lead configuration with two leads.

Functional Features

  • Transient Suppression: Effectively suppresses voltage transients and spikes.
  • Fast Response Time: Rapidly responds to overvoltage conditions, protecting downstream components.

Advantages and Disadvantages

  • Advantages:
    • High surge capability
    • Low clamping voltage
    • Fast response time
  • Disadvantages:
    • Limited to specific voltage ratings

Working Principles

When an overvoltage condition occurs, the diode conducts and diverts the excess current away from the protected circuit, limiting the voltage across it.

Detailed Application Field Plans

The 1.5KE10AHE3_A/C is commonly used in: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • 1.5KE6.8AHE3_A/C
  • 1.5KE16AHE3_A/C
  • 1.5KE24AHE3_A/C

This information provides a comprehensive overview of the 1.5KE10AHE3_A/C transient voltage suppressor diode, covering its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 1.5KE10AHE3_A/C v technických řešeních

  1. What is the maximum peak pulse power of 1.5KE10AHE3_A/C?

    • The maximum peak pulse power is 1500 watts for a 10/1000μs waveform.

  2. What is the breakdown voltage of 1.5KE10AHE3_A/C?

    • The breakdown voltage is typically 9.4 volts at 1mA.

  3. What are the typical applications for 1.5KE10AHE3_A/C?

    • Typical applications include transient voltage suppression in electronic equipment, automotive systems, and industrial controls.

  4. What is the operating temperature range for 1.5KE10AHE3_A/C?

    • The operating temperature range is -55°C to +175°C.

  5. What is the reverse stand-off voltage of 1.5KE10AHE3_A/C?

    • The reverse stand-off voltage is 8.55 volts.

  6. What is the clamping voltage of 1.5KE10AHE3_A/C?

    • The clamping voltage is 14.5 volts at 19.9A.

  7. Does 1.5KE10AHE3_A/C meet RoHS compliance?

    • Yes, it is compliant with the Restriction of Hazardous Substances (RoHS) directive.

  8. What is the package type of 1.5KE10AHE3_A/C?

    • It comes in a DO-201AD package.

  9. What is the lead-free status of 1.5KE10AHE3_A/C?

    • It is lead-free and meets the requirements of RoHS and WEEE directives.

  10. What are the recommended soldering conditions for 1.5KE10AHE3_A/C?

    • The recommended soldering conditions are 260°C for 10 seconds.