Torex Semiconductor Ltd
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
XC6108N19AGR-G
Zobrazit detail DataSheets

XC6108N19AGR-G

Product Overview

Category

XC6108N19AGR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.9V
  • Maximum Output Current: 150mA
  • Low Dropout Voltage: 200mV (typical)
  • Low Quiescent Current: 30μA (typical)
  • High Ripple Rejection Ratio: 70dB (typical)
  • Built-in Overcurrent Protection
  • Small Package Size: SOT-23-5

Package

XC6108N19AGR-G is packaged in a small SOT-23-5 package.

Essence

The essence of XC6108N19AGR-G is its ability to provide stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6108N19AGR-G is typically available in reels containing 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.9V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Ripple Rejection Ratio: 70dB (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

XC6108N19AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • Regulates input voltage to a stable 1.9V output.
  • Low dropout voltage ensures efficient power conversion.
  • Built-in overcurrent protection safeguards the circuit.
  • High ripple rejection ratio minimizes noise interference.
  • Small package size allows for space-saving integration.

Advantages and Disadvantages

Advantages

  • Wide input voltage range.
  • Low quiescent current consumption.
  • Excellent ripple rejection ratio.
  • Compact package size.

Disadvantages

  • Limited maximum output current (150mA).

Working Principles

XC6108N19AGR-G operates by comparing the output voltage with a reference voltage. It adjusts the internal pass transistor to maintain a constant output voltage, compensating for changes in input voltage and load conditions. The built-in overcurrent protection feature ensures the device shuts down in case of excessive current flow.

Detailed Application Field Plans

XC6108N19AGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable audio players - Mobile phones - Digital cameras - Wearable devices

Detailed and Complete Alternative Models

Some alternative models to XC6108N19AGR-G include: - XC6201P192MR-G - XC6220B192MR-G - XC6219B192MR-G - XC6221B192MR-G - XC6223B192MR-G

These models offer similar voltage regulation capabilities and can be considered as alternatives based on specific requirements.

Word count: 408 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací XC6108N19AGR-G v technických řešeních

Sure! Here are 10 common questions and answers related to the application of XC6108N19AGR-G in technical solutions:

  1. Question: What is XC6108N19AGR-G?
    - Answer: XC6108N19AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108N19AGR-G?
    - Answer: The operating voltage range of XC6108N19AGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6108N19AGR-G help in technical solutions?
    - Answer: XC6108N19AGR-G helps in technical solutions by ensuring proper power supply voltage levels, preventing malfunctions or data corruption in electronic devices.

  4. Question: Can XC6108N19AGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108N19AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 0.5µA.

  5. Question: What is the output type of XC6108N19AGR-G?
    - Answer: XC6108N19AGR-G has an open-drain output type, which allows for flexibility in connecting external components.

  6. Question: What is the typical reset threshold voltage of XC6108N19AGR-G?
    - Answer: The typical reset threshold voltage of XC6108N19AGR-G is 1.9V.

  7. Question: Can XC6108N19AGR-G be used in automotive applications?
    - Answer: Yes, XC6108N19AGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  8. Question: Does XC6108N19AGR-G have built-in hysteresis?
    - Answer: Yes, XC6108N19AGR-G has built-in hysteresis of typically 0.1V, which helps to prevent oscillation near the threshold voltage.

  9. Question: What is the package type of XC6108N19AGR-G?
    - Answer: XC6108N19AGR-G is available in a small SOT-23-5 package, which is commonly used for compact electronic designs.

  10. Question: Can XC6108N19AGR-G be used in industrial control systems?
    - Answer: Yes, XC6108N19AGR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.

Please note that the answers provided are general and may vary depending on the specific datasheet and application requirements.