Viz Specifikace pro podrobnosti o produktu.
UCD9080RHBR
Product Overview
Category
The UCD9080RHBR belongs to the category of integrated circuits (ICs).
Use
This IC is primarily used in power management applications.
Characteristics
- High efficiency and reliability
- Low power consumption
- Compact size
- Wide operating temperature range
Package
The UCD9080RHBR comes in a small outline package (SOIC) with a heat sink pad.
Essence
The essence of the UCD9080RHBR lies in its ability to efficiently manage power in various applications.
Packaging/Quantity
The UCD9080RHBR is typically packaged in reels, with each reel containing a specific quantity of ICs.
Specifications
- Input voltage range: 4.5V to 16V
- Output voltage range: 0.6V to 5.5V
- Maximum output current: 10A
- Operating temperature range: -40°C to 125°C
- Switching frequency: 500kHz
Detailed Pin Configuration
The UCD9080RHBR has a total of 20 pins, each serving a specific function. The pin configuration is as follows:
- VDD: Power supply input
- GND: Ground reference
- EN: Enable pin for device operation
- FB: Feedback pin for regulating output voltage
- COMP: Compensation pin for stability control
- SS/TR: Soft-start and tracking pin
- PGND: Power ground reference
- BOOT: Bootstrap capacitor connection
- PHASE: Phase node connection
- SW: Switching node connection
- RT/CLK: External resistor or clock input
- SYNC: Synchronization input
- VSENSE: Voltage sensing input
- ISENSE: Current sensing input
- VREF: Reference voltage output
- SS/TR: Soft-start and tracking pin
- PGND: Power ground reference
- BOOT: Bootstrap capacitor connection
- PHASE: Phase node connection
- SW: Switching node connection
Functional Features
- High-efficiency synchronous buck converter
- Adaptive on-time control for improved transient response
- Integrated MOSFET drivers for reduced external component count
- Programmable soft-start and tracking functions
- Overcurrent protection and thermal shutdown features
Advantages and Disadvantages
Advantages
- High efficiency leads to energy savings
- Compact size allows for space-efficient designs
- Wide operating temperature range enables usage in various environments
- Integrated MOSFET drivers reduce external component count
Disadvantages
- Limited maximum output current of 10A
- Requires careful consideration of input and output voltage ranges
Working Principles
The UCD9080RHBR operates as a synchronous buck converter, converting a higher input voltage to a lower output voltage efficiently. It utilizes adaptive on-time control to regulate the output voltage and achieve improved transient response. The integrated MOSFET drivers simplify the design by reducing the need for additional external components.
Detailed Application Field Plans
The UCD9080RHBR finds applications in various fields, including: 1. Power supplies for industrial equipment 2. Automotive power management systems 3. Telecommunications infrastructure 4. Renewable energy systems 5. Consumer electronics
Detailed and Complete Alternative Models
- UCD9080RGZT: Similar specifications but with different package type (QFN)
- UCD9080RHBT: Similar specifications but with different package type (TSSOP)
- UCD9080RHBTG4: Similar specifications but with different package type (TSSOP)
These alternative models provide flexibility in choosing the most suitable package type for specific design requirements.
Word count: 536
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací UCD9080RHBR v technických řešeních
Sure! Here are 10 common questions and answers related to the application of UCD9080RHBR in technical solutions:
Q: What is UCD9080RHBR? A: UCD9080RHBR is a highly integrated digital power controller designed for use in various power supply applications.
Q: What are the key features of UCD9080RHBR? A: Some key features of UCD9080RHBR include high-performance digital control, multiple output voltage regulation, fault protection, and communication interfaces.
Q: How can UCD9080RHBR be used in power supply designs? A: UCD9080RHBR can be used as a primary or secondary-side controller in AC-DC or DC-DC power supplies, providing precise voltage and current regulation.
Q: Can UCD9080RHBR support multiple outputs? A: Yes, UCD9080RHBR supports multiple outputs, allowing for the control of different voltage rails in a power supply design.
Q: Does UCD9080RHBR offer fault protection features? A: Yes, UCD9080RHBR provides various fault protection features such as overvoltage protection, undervoltage protection, and overcurrent protection.
Q: What communication interfaces does UCD9080RHBR support? A: UCD9080RHBR supports I2C and PMBus interfaces, enabling easy communication with other devices in the system.
Q: Can UCD9080RHBR be programmed and configured? A: Yes, UCD9080RHBR can be programmed and configured using dedicated software tools provided by the manufacturer.
Q: Is UCD9080RHBR suitable for high-power applications? A: Yes, UCD9080RHBR is suitable for high-power applications as it can handle high currents and voltages with its robust design.
Q: What are the benefits of using UCD9080RHBR in power supply designs? A: Some benefits include improved efficiency, precise voltage regulation, enhanced fault protection, and simplified system monitoring and control.
Q: Are there any application notes or reference designs available for UCD9080RHBR? A: Yes, the manufacturer provides application notes and reference designs that can help engineers in implementing UCD9080RHBR in their specific applications.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.