Viz Specifikace pro podrobnosti o produktu.
TPS3600D50PWRG4
Product Overview
Category
The TPS3600D50PWRG4 belongs to the category of integrated circuits (ICs).
Use
This IC is primarily used for power management applications.
Characteristics
- High efficiency voltage regulator
- Low dropout voltage
- Adjustable output voltage
- Overcurrent and thermal protection
- Small package size
Package
The TPS3600D50PWRG4 comes in a small outline, thin package (SOT-23) which allows for easy integration into various electronic devices.
Essence
The essence of the TPS3600D50PWRG4 lies in its ability to regulate voltage efficiently and reliably, making it an essential component in power management systems.
Packaging/Quantity
The TPS3600D50PWRG4 is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage Range: 1.2V to 5.5V
- Dropout Voltage: 200mV (typical)
- Maximum Output Current: 500mA
- Quiescent Current: 75µA (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The TPS3600D50PWRG4 has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- FB: Feedback pin for adjusting the output voltage
- EN: Enable pin for turning the IC on/off
- VOUT: Output voltage pin
Functional Features
- High Efficiency: The TPS3600D50PWRG4 offers high efficiency power conversion, minimizing energy loss.
- Adjustable Output Voltage: The output voltage can be easily adjusted within the specified range to meet specific requirements.
- Overcurrent and Thermal Protection: The IC incorporates protection mechanisms to prevent damage from overcurrent or excessive heat.
- Low Dropout Voltage: The low dropout voltage ensures stable operation even when the input voltage is close to the output voltage.
Advantages and Disadvantages
Advantages
- High efficiency power management
- Adjustable output voltage for flexibility
- Compact package size for easy integration
- Overcurrent and thermal protection for enhanced reliability
Disadvantages
- Limited maximum output current (500mA)
- Restricted input voltage range (2.5V to 6.5V)
Working Principles
The TPS3600D50PWRG4 operates as a linear voltage regulator. It regulates the output voltage by comparing it with a reference voltage and adjusting the internal circuitry accordingly. The feedback pin (FB) allows for precise adjustment of the output voltage, while the enable pin (EN) controls the on/off state of the IC.
Detailed Application Field Plans
The TPS3600D50PWRG4 finds applications in various fields, including but not limited to: 1. Portable electronic devices: Power management for smartphones, tablets, and wearable devices. 2. Industrial automation: Voltage regulation for control systems and sensors. 3. Automotive electronics: Power supply for infotainment systems, lighting, and sensors. 4. IoT devices: Energy-efficient power management for connected devices.
Detailed and Complete Alternative Models
- TPS3600D33PWRG4: Similar to TPS3600D50PWRG4, but with a fixed output voltage of 3.3V.
- TPS3600D25PWRG4: Similar to TPS3600D50PWRG4, but with a fixed output voltage of 2.5V.
- TPS3600D18PWRG4: Similar to TPS3600D50PWRG4, but with a fixed output voltage of 1.8V.
These alternative models provide options for different output voltage requirements while maintaining similar characteristics and features.
In conclusion, the TPS3600D50PWRG4 is a versatile integrated circuit that offers efficient power management capabilities. Its adjustable output voltage, compact package size, and protection features make it suitable for various applications in different industries.
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TPS3600D50PWRG4 v technických řešeních
Sure! Here are 10 common questions and answers related to the application of TPS3600D50PWRG4 in technical solutions:
Q: What is TPS3600D50PWRG4? A: TPS3600D50PWRG4 is a voltage supervisor and reset IC manufactured by Texas Instruments.
Q: What is the purpose of TPS3600D50PWRG4? A: The purpose of TPS3600D50PWRG4 is to monitor the voltage level of a power supply and generate a reset signal when the voltage falls below a certain threshold.
Q: What is the input voltage range supported by TPS3600D50PWRG4? A: TPS3600D50PWRG4 supports an input voltage range of 1.8V to 6V.
Q: What is the typical reset threshold voltage of TPS3600D50PWRG4? A: The typical reset threshold voltage of TPS3600D50PWRG4 is 4.63V.
Q: Can TPS3600D50PWRG4 be used in battery-powered applications? A: Yes, TPS3600D50PWRG4 can be used in battery-powered applications as it operates within a wide input voltage range.
Q: Does TPS3600D50PWRG4 have any built-in delay for generating the reset signal? A: Yes, TPS3600D50PWRG4 has a fixed delay of approximately 200ms before generating the reset signal.
Q: Can TPS3600D50PWRG4 be used in automotive applications? A: Yes, TPS3600D50PWRG4 is suitable for automotive applications as it can withstand the harsh operating conditions typically found in automotive environments.
Q: What is the output type of TPS3600D50PWRG4? A: TPS3600D50PWRG4 has an open-drain output, which allows for flexibility in connecting to different microcontrollers or logic devices.
Q: Does TPS3600D50PWRG4 have any additional features for fault detection? A: Yes, TPS3600D50PWRG4 has a power-good (PG) output that can be used to indicate when the input voltage is within the acceptable range.
Q: Is TPS3600D50PWRG4 available in different package options? A: Yes, TPS3600D50PWRG4 is available in a 6-pin SOT-23 package, which is compact and suitable for space-constrained applications.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.