Viz Specifikace pro podrobnosti o produktu.
TLV2782AIDR
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low Voltage, Rail-to-Rail Input/Output, Dual Channel
- Package: SOIC (Small Outline Integrated Circuit)
- Essence: TLV2782AIDR is a dual-channel operational amplifier designed for low voltage applications. It offers rail-to-rail input and output capabilities, making it suitable for use in various precision analog circuits.
- Packaging/Quantity: TLV2782AIDR is available in a standard SOIC package with a quantity of 250 units per reel.
Specifications
- Supply Voltage: 2.7V to 5.5V
- Input Offset Voltage: ±1.5mV (maximum)
- Input Bias Current: ±1pA (typical)
- Gain Bandwidth Product: 10MHz (typical)
- Slew Rate: 3.6V/µs (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The TLV2782AIDR has a total of 8 pins arranged as follows:
___________
OUT1 | 1 8 | VCC+
OUT2 | 2 7 | IN-
IN+ | 3 6 | IN+
GND | 4 5 | VCC-
¯¯¯¯¯¯¯¯¯¯¯
Functional Features
- Dual-channel operational amplifier
- Rail-to-rail input and output voltage range
- Low input offset voltage and bias current
- High gain bandwidth product and slew rate
- Wide operating temperature range
Advantages and Disadvantages
Advantages: - Suitable for low voltage applications - Can handle rail-to-rail input and output signals - Low input offset voltage and bias current ensure high precision - Wide operating temperature range allows for use in various environments
Disadvantages: - Limited to dual-channel configuration - May not be suitable for high-frequency applications due to moderate gain bandwidth product
Working Principles
The TLV2782AIDR is based on a CMOS (Complementary Metal-Oxide-Semiconductor) technology, which allows it to operate at low voltages while maintaining high performance. It utilizes a differential amplifier configuration to amplify the voltage difference between its input terminals. The rail-to-rail input and output capabilities enable the amplifier to accurately process signals that span the entire supply voltage range.
Detailed Application Field Plans
TLV2782AIDR can be used in various applications, including but not limited to: 1. Sensor signal conditioning 2. Battery-powered instrumentation 3. Audio amplification 4. Active filters 5. Data acquisition systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to TLV2782AIDR are: 1. LMV358IDGKR: Dual Operational Amplifier, Rail-to-Rail Input/Output, 8-Pin VSSOP package. 2. MCP602-I/P: Dual Operational Amplifier, Rail-to-Rail Input/Output, 8-Pin DIP package. 3. MAX44267AUD+: Dual Operational Amplifier, Rail-to-Rail Input/Output, 14-Pin TSSOP package.
These alternatives can be considered based on specific requirements and preferences.
Word count: 389 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TLV2782AIDR v technických řešeních
Sure! Here are 10 common questions and answers related to the application of TLV2782AIDR in technical solutions:
Q: What is TLV2782AIDR? A: TLV2782AIDR is a dual operational amplifier (op-amp) with rail-to-rail input/output capability, commonly used in various electronic applications.
Q: What is the supply voltage range for TLV2782AIDR? A: The supply voltage range for TLV2782AIDR is typically between 2.7V and 6V.
Q: What is the maximum output current of TLV2782AIDR? A: The maximum output current of TLV2782AIDR is approximately 40mA.
Q: Can TLV2782AIDR operate in single-supply mode? A: Yes, TLV2782AIDR can operate in both single-supply and dual-supply configurations.
Q: What is the input offset voltage of TLV2782AIDR? A: The input offset voltage of TLV2782AIDR is typically around 1mV.
Q: Is TLV2782AIDR suitable for low-power applications? A: Yes, TLV2782AIDR has a low quiescent current consumption, making it suitable for low-power applications.
Q: Can TLV2782AIDR drive capacitive loads? A: Yes, TLV2782AIDR has a high output current capability, allowing it to drive capacitive loads up to a certain limit.
Q: What is the bandwidth of TLV2782AIDR? A: The bandwidth of TLV2782AIDR is typically around 10MHz.
Q: Does TLV2782AIDR have built-in protection features? A: Yes, TLV2782AIDR has built-in features like short-circuit protection and thermal shutdown to ensure safe operation.
Q: What are some typical applications of TLV2782AIDR? A: TLV2782AIDR is commonly used in audio amplifiers, sensor interfaces, battery-powered systems, and other general-purpose signal conditioning applications.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.