Viz Specifikace pro podrobnosti o produktu.
TLV2771IDBVR
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, Rail-to-Rail Input/Output, Single-Supply, Micro-Power Amplifier
- Package: SOT-23-5
- Essence: TLV2771IDBVR is a low-power operational amplifier designed for single-supply applications. It offers rail-to-rail input and output capabilities, making it suitable for a wide range of precision analog signal conditioning and amplification tasks.
- Packaging/Quantity: TLV2771IDBVR is available in a SOT-23-5 package and is typically sold in reels of 3000 units.
Specifications
- Supply Voltage Range: 2.7V to 16V
- Input Offset Voltage: ±1.5mV (maximum)
- Input Bias Current: ±1pA (typical)
- Gain Bandwidth Product: 2.7MHz (typical)
- Slew Rate: 1.6V/µs (typical)
- Quiescent Current: 20µA (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2771IDBVR has the following pin configuration:
____
V+ |1 5| Output
IN-|2 4| IN+
V- |3____|
Functional Features
- Low-power consumption: The TLV2771IDBVR operates at a quiescent current of only 20µA, making it suitable for battery-powered applications.
- Rail-to-rail input/output: The amplifier can accept and deliver signals that are close to the supply rails, maximizing the dynamic range of the system.
- Single-supply operation: The TLV2771IDBVR can operate from a single power supply, simplifying circuit design and reducing component count.
Advantages and Disadvantages
Advantages: - Low-power consumption extends battery life in portable applications. - Rail-to-rail input/output allows for accurate signal amplification even at low voltages. - Single-supply operation simplifies circuit design.
Disadvantages: - Limited bandwidth compared to higher-performance operational amplifiers. - Higher input offset voltage compared to precision amplifiers.
Working Principles
The TLV2771IDBVR is based on a CMOS input stage and a rail-to-rail output stage. It utilizes a class-AB output architecture to achieve low quiescent current while maintaining good linearity and output swing capabilities. The amplifier's internal compensation ensures stability across a wide range of operating conditions.
Detailed Application Field Plans
The TLV2771IDBVR is suitable for various applications, including but not limited to: - Battery-powered portable devices - Sensor signal conditioning - Audio amplification - Active filters - Data acquisition systems - Industrial control systems
Alternative Models
Some alternative models that offer similar functionality to the TLV2771IDBVR include: - LMV321: Low-voltage, low-power operational amplifier - MCP6001: Single-supply, rail-to-rail input/output op-amp - MAX406: Precision, low-power operational amplifier
These alternatives can be considered based on specific application requirements and cost considerations.
Word count: 346 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TLV2771IDBVR v technických řešeních
Sure! Here are 10 common questions and answers related to the application of TLV2771IDBVR in technical solutions:
Q1: What is TLV2771IDBVR? A1: TLV2771IDBVR is a low-power, rail-to-rail input/output operational amplifier (op-amp) that is commonly used in various technical applications.
Q2: What is the supply voltage range for TLV2771IDBVR? A2: The supply voltage range for TLV2771IDBVR is typically between 2.7V and 5.5V.
Q3: What is the input voltage range for TLV2771IDBVR? A3: The input voltage range for TLV2771IDBVR extends from the negative supply voltage (V-) to the positive supply voltage (V+).
Q4: What is the typical gain bandwidth product (GBWP) of TLV2771IDBVR? A4: The typical gain bandwidth product of TLV2771IDBVR is around 10 MHz.
Q5: Can TLV2771IDBVR operate with a single power supply? A5: Yes, TLV2771IDBVR can operate with a single power supply as long as it is within the specified supply voltage range.
Q6: What is the input bias current of TLV2771IDBVR? A6: The input bias current of TLV2771IDBVR is typically very low, around 1 pA.
Q7: Is TLV2771IDBVR suitable for precision applications? A7: Yes, TLV2771IDBVR is suitable for precision applications due to its low offset voltage and low input bias current.
Q8: Can TLV2771IDBVR drive capacitive loads? A8: Yes, TLV2771IDBVR can drive capacitive loads up to a certain limit. It is recommended to refer to the datasheet for specific details.
Q9: What is the temperature range for TLV2771IDBVR? A9: The operating temperature range for TLV2771IDBVR is typically between -40°C and 125°C.
Q10: Are there any application notes or reference designs available for TLV2771IDBVR? A10: Yes, Texas Instruments provides application notes and reference designs that can help in understanding and implementing TLV2771IDBVR in various technical solutions. These resources can be found on their website.
Please note that the answers provided here are general and may vary depending on the specific requirements and conditions of your application. It is always recommended to refer to the datasheet and consult with the manufacturer for accurate and detailed information.