Viz Specifikace pro podrobnosti o produktu.
TLV2475ING4
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, Rail-to-Rail Input/Output, Precision
- Package: DIP-14 (Dual In-Line Package with 14 pins)
- Essence: TLV2475ING4 is a precision operational amplifier designed for low-power applications. It offers rail-to-rail input and output capabilities, making it suitable for a wide range of voltage sensing and signal conditioning tasks.
- Packaging/Quantity: TLV2475ING4 is available in tape and reel packaging, with 2500 units per reel.
Specifications
- Supply Voltage Range: 2.7V to 5.5V
- Input Offset Voltage: ±1.5mV (maximum)
- Input Bias Current: ±1pA (maximum)
- Gain Bandwidth Product: 3MHz
- Slew Rate: 1.6V/µs
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The TLV2475ING4 has a total of 14 pins, which are assigned specific functions as follows:
- OUT1: Output 1
- IN1-: Inverting Input 1
- IN1+: Non-Inverting Input 1
- VCC+: Positive Power Supply
- NC: No Connection
- IN2+: Non-Inverting Input 2
- IN2-: Inverting Input 2
- OUT2: Output 2
- VCC-: Negative Power Supply
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
Functional Features
- Low-power consumption makes it suitable for battery-powered applications.
- Rail-to-rail input and output allows for maximum utilization of the available voltage range.
- Precision performance ensures accurate signal amplification and conditioning.
- Wide operating temperature range enables usage in extreme environments.
Advantages and Disadvantages
Advantages
- Low power consumption extends battery life in portable devices.
- Rail-to-rail input/output capability provides flexibility in voltage sensing applications.
- Precision performance ensures accurate signal processing.
- Wide operating temperature range allows for use in various environmental conditions.
Disadvantages
- Limited gain bandwidth product may restrict its suitability for high-frequency applications.
- The DIP-14 package may not be suitable for space-constrained designs.
Working Principles
The TLV2475ING4 is based on a differential amplifier configuration, which amplifies the voltage difference between its two input terminals. It utilizes a combination of transistors and resistors to achieve precise amplification while maintaining low power consumption. The rail-to-rail input/output capability is achieved through specialized circuitry that allows the amplifier to operate with input and output voltages close to the power supply rails.
Detailed Application Field Plans
The TLV2475ING4 can be used in various applications, including but not limited to:
- Sensor signal conditioning: Amplifying and conditioning signals from sensors such as temperature, pressure, or light sensors.
- Portable instrumentation: Providing amplification and filtering for portable measurement devices.
- Battery-powered systems: Enabling efficient signal processing in devices powered by batteries, such as wearable devices or remote monitoring systems.
- Audio amplification: Amplifying audio signals in low-power audio applications.
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the TLV2475ING4 include:
- LMV321: Low-voltage, low-power operational amplifier.
- MCP6001: Single-supply, low-power operational amplifier.
- MAX44246: Rail-to-rail input/output precision amplifier.
These alternative models can be considered based on specific application requirements and design constraints.
Word count: 439 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TLV2475ING4 v technických řešeních
Sure! Here are 10 common questions and answers related to the application of TLV2475ING4 in technical solutions:
Q: What is TLV2475ING4? A: TLV2475ING4 is a quad operational amplifier (op-amp) with rail-to-rail input/output capability, low noise, and low power consumption.
Q: What are the key features of TLV2475ING4? A: TLV2475ING4 features low offset voltage, low input bias current, wide bandwidth, and high slew rate, making it suitable for precision applications.
Q: What is the supply voltage range for TLV2475ING4? A: TLV2475ING4 operates from a single supply voltage ranging from 2.7V to 6V.
Q: Can TLV2475ING4 be used in battery-powered applications? A: Yes, TLV2475ING4's low power consumption makes it suitable for battery-powered applications where power efficiency is crucial.
Q: What is the input voltage range of TLV2475ING4? A: TLV2475ING4 has a rail-to-rail input voltage range, meaning it can accept signals close to both the positive and negative supply voltages.
Q: Is TLV2475ING4 capable of driving capacitive loads? A: Yes, TLV2475ING4 has a high output current capability, allowing it to drive capacitive loads up to a certain limit.
Q: Can TLV2475ING4 operate in harsh environments? A: TLV2475ING4 has a wide temperature range and is designed to operate reliably in industrial and automotive environments.
Q: What are some typical applications of TLV2475ING4? A: TLV2475ING4 is commonly used in sensor signal conditioning, data acquisition systems, precision instrumentation, and audio amplification.
Q: Does TLV2475ING4 have built-in protection features? A: Yes, TLV2475ING4 includes built-in features like short-circuit protection and thermal shutdown to ensure safe operation.
Q: Are there any recommended external components for TLV2475ING4? A: TLV2475ING4 typically requires external decoupling capacitors and feedback resistors for stability and proper operation. The datasheet provides detailed guidelines for component selection and circuit design.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the TLV2475ING4 datasheet and consult with an experienced engineer for accurate information.