Viz Specifikace pro podrobnosti o produktu.
TLV2472AQDRQ1
Product Overview
Category: Integrated Circuits (ICs)
Use: TLV2472AQDRQ1 is a dual operational amplifier designed for automotive applications. It is specifically tailored to meet the stringent requirements of the automotive industry, including high reliability and extended temperature range.
Characteristics: - High precision - Low noise - Wide supply voltage range - Rail-to-rail input and output - Low power consumption
Package: TLV2472AQDRQ1 comes in a small outline package (SOIC) with 8 pins.
Essence: TLV2472AQDRQ1 is an essential component in automotive electronic systems, providing amplification and signal conditioning functions.
Packaging/Quantity: TLV2472AQDRQ1 is typically sold in reels containing 2500 units per reel.
Specifications
- Supply Voltage Range: 2.7V to 5.5V
- Input Offset Voltage: ±1.5mV (maximum)
- Input Bias Current: ±1pA (maximum)
- Gain Bandwidth Product: 10MHz
- Slew Rate: 6V/µs
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2472AQDRQ1 has the following pin configuration:
___________
Vcc | 1 8 | Vout2
Vin+| 2 7 | Vin-
Vin-| 3 6 | Vout1
Gnd | 4 5 | NC
‾‾‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- High precision amplification of signals
- Wide input and output voltage range
- Low noise operation
- Rail-to-rail input and output capability
- Low power consumption for efficient energy usage
Advantages and Disadvantages
Advantages: - Designed specifically for automotive applications, ensuring high reliability - Extended temperature range allows operation in harsh environments - High precision amplification for accurate signal processing - Low noise performance for improved signal integrity - Rail-to-rail input and output capability enables full utilization of the supply voltage range - Low power consumption helps to conserve energy
Disadvantages: - Limited availability in small quantities for non-automotive applications - Higher cost compared to general-purpose operational amplifiers
Working Principles
TLV2472AQDRQ1 operates based on the principles of operational amplifiers. It amplifies the difference between its two input voltages and provides an amplified output signal. The rail-to-rail input and output capability allows it to handle signals that span the entire supply voltage range. The low noise and high precision characteristics ensure accurate amplification and conditioning of signals.
Detailed Application Field Plans
TLV2472AQDRQ1 is widely used in various automotive applications, including: - Engine control units (ECUs) - Powertrain systems - Safety systems (airbags, ABS) - Infotainment systems - Lighting control modules - Climate control systems
Its high reliability, extended temperature range, and precise amplification make it suitable for critical automotive functions.
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to TLV2472AQDRQ1 are: - LM358 - MCP6002 - AD822
These models offer similar functionality and can be used as replacements depending on specific application requirements.
(Note: This entry has a total word count of 416 words)
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TLV2472AQDRQ1 v technických řešeních
Sure! Here are 10 common questions and answers related to the application of TLV2472AQDRQ1 in technical solutions:
1. What is TLV2472AQDRQ1? TLV2472AQDRQ1 is a dual operational amplifier designed for automotive applications. It offers low noise, high bandwidth, and rail-to-rail output swing capabilities.
2. What are the key features of TLV2472AQDRQ1? The key features of TLV2472AQDRQ1 include low input bias current, low offset voltage, wide supply voltage range, and excellent common-mode rejection ratio (CMRR).
3. What is the typical supply voltage range for TLV2472AQDRQ1? The typical supply voltage range for TLV2472AQDRQ1 is from 2.7V to 5.5V.
4. What is the maximum operating temperature for TLV2472AQDRQ1? The maximum operating temperature for TLV2472AQDRQ1 is -40°C to +125°C.
5. Can TLV2472AQDRQ1 be used in automotive applications? Yes, TLV2472AQDRQ1 is specifically designed for automotive applications and meets the AEC-Q100 Grade 1 qualification standards.
6. What is the input bias current of TLV2472AQDRQ1? The input bias current of TLV2472AQDRQ1 is typically 1 pA.
7. What is the gain bandwidth product of TLV2472AQDRQ1? The gain bandwidth product of TLV2472AQDRQ1 is typically 10 MHz.
8. Can TLV2472AQDRQ1 operate with a single supply voltage? Yes, TLV2472AQDRQ1 can operate with a single supply voltage, as it has rail-to-rail output swing capabilities.
9. What is the output voltage swing of TLV2472AQDRQ1? The output voltage swing of TLV2472AQDRQ1 is typically within 10 mV of the supply rails.
10. Is TLV2472AQDRQ1 suitable for low-noise applications? Yes, TLV2472AQDRQ1 is suitable for low-noise applications due to its low input bias current and low offset voltage characteristics.
Please note that these answers are based on general information about TLV2472AQDRQ1 and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and application guidelines.