Viz Specifikace pro podrobnosti o produktu.
TLV2434AIDR
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Operational Amplifier
- Package: SOIC (Small Outline Integrated Circuit)
- Essence: The TLV2434AIDR is a low-power quad operational amplifier designed for general-purpose applications.
- Packaging/Quantity: The TLV2434AIDR is available in a 14-pin SOIC package and is typically sold in reels of 2500 units.
Specifications
- Supply Voltage Range: 2.7V to 5.5V
- Input Offset Voltage: ±1.5mV (maximum)
- Input Bias Current: ±1pA (typical)
- Gain Bandwidth Product: 2.8MHz (typical)
- Slew Rate: 1.6V/µs (typical)
- Input Common Mode Voltage Range: Rail-to-Rail
- Output Voltage Swing: Rail-to-Rail
- Quiescent Current: 500µA per amplifier (typical)
Pin Configuration
The TLV2434AIDR has a 14-pin SOIC package with the following pin configuration:
___________
| |
NC | 1 14 | Vcc+
OUT1 | 2 13 | IN4-
IN1- | 3 12 | IN4+
IN1+ | 4 11 | OUT4
GND | 5 10 | IN3-
OUT2 | 6 9 | IN3+
IN2- | 7 8 | OUT3
|___________|
Functional Features
- Low-power consumption
- Rail-to-Rail input and output voltage range
- Quad operational amplifier in a single package
- Wide supply voltage range for flexibility in various applications
- High gain bandwidth product for accurate signal amplification
- Low input offset voltage for precision applications
Advantages and Disadvantages
Advantages: - Low power consumption makes it suitable for battery-powered devices - Rail-to-Rail input/output allows for maximum utilization of the supply voltage range - Quad operational amplifier saves board space and reduces component count - Wide supply voltage range provides flexibility in different power supply configurations - High gain bandwidth product ensures accurate amplification of signals - Low input offset voltage enables precise measurements and control
Disadvantages: - Limited output current capability may not be suitable for driving heavy loads - Slightly higher input bias current compared to some other operational amplifiers
Working Principles
The TLV2434AIDR is an operational amplifier that amplifies the difference between its two input terminals. It operates on a low supply voltage and provides rail-to-rail input and output voltage range, allowing it to handle signals close to the power supply rails. The quad configuration of the TLV2434AIDR enables multiple amplifiers to be used in a single package, saving board space and reducing component count.
Detailed Application Field Plans
The TLV2434AIDR can be used in various applications, including but not limited to: - Sensor signal conditioning - Audio amplification - Active filters - Data acquisition systems - Portable instrumentation - Battery-powered devices - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to the TLV2434AIDR are: - LM324 - MCP6004 - AD8620 - MAX44246 - OPA2340
These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.
Note: The content provided above is approximately 400 words. Additional information may be required to reach the desired word count of 1100 words.
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TLV2434AIDR v technických řešeních
Sure! Here are 10 common questions and answers related to the application of TLV2434AIDR in technical solutions:
Q: What is TLV2434AIDR? A: TLV2434AIDR is a quad operational amplifier (op-amp) with rail-to-rail input/output capability, commonly used in various electronic applications.
Q: What is the supply voltage range for TLV2434AIDR? A: The supply voltage range for TLV2434AIDR is typically between 2.7V and 5.5V.
Q: What is the maximum output current TLV2434AIDR can provide? A: TLV2434AIDR can provide a maximum output current of around 20mA.
Q: Can TLV2434AIDR operate in single-supply mode? A: Yes, TLV2434AIDR can operate in both single-supply and dual-supply configurations.
Q: What is the input offset voltage of TLV2434AIDR? A: The input offset voltage of TLV2434AIDR is typically around 1mV.
Q: What is the bandwidth of TLV2434AIDR? A: The bandwidth of TLV2434AIDR is typically around 2MHz.
Q: Can TLV2434AIDR be used in low-power applications? A: Yes, TLV2434AIDR has a low quiescent current consumption, making it suitable for low-power applications.
Q: Is TLV2434AIDR suitable for precision applications? A: TLV2434AIDR has a low input offset voltage and low input bias current, making it suitable for precision applications.
Q: Can TLV2434AIDR drive capacitive loads? A: Yes, TLV2434AIDR has a high output current capability, allowing it to drive capacitive loads without significant degradation in performance.
Q: What are some common applications of TLV2434AIDR? A: TLV2434AIDR is commonly used in audio amplifiers, sensor interfaces, signal conditioning circuits, and other general-purpose op-amp applications.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.