TLV2404IN

Product Overview

Category: Integrated Circuit (IC)
Use: Operational Amplifier
Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Operational Amplifier
Package: PDIP (Plastic Dual In-Line Package)
Essence: The TLV2404IN is a quad operational amplifier designed for low-power applications. It offers rail-to-rail input and output capabilities, making it suitable for a wide range of analog signal conditioning and amplification tasks.
Packaging/Quantity: The TLV2404IN is typically sold in tubes or reels, with quantities varying depending on the supplier.

Specifications

Supply Voltage: 2.7V to 16V
Input Offset Voltage: ±1mV (maximum)
Input Bias Current: ±1pA (typical)
Gain Bandwidth Product: 2.8MHz (typical)
Slew Rate: 1.6V/µs (typical)
Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLV2404IN has a standard pin configuration for a quad operational amplifier:

Pin 1: Non-Inverting Input (Op-Amp 1)
Pin 2: Inverting Input (Op-Amp 1)
Pin 3: Output (Op-Amp 1)
Pin 4: V-
Pin 5: Non-Inverting Input (Op-Amp 2)
Pin 6: Inverting Input (Op-Amp 2)
Pin 7: Output (Op-Amp 2)
Pin 8: V+
Pin 9: Non-Inverting Input (Op-Amp 3)
Pin 10: Inverting Input (Op-Amp 3)
Pin 11: Output (Op-Amp 3)
Pin 12: V-
Pin 13: Non-Inverting Input (Op-Amp 4)
Pin 14: Inverting Input (Op-Amp 4)
Pin 15: Output (Op-Amp 4)
Pin 16: V+

Functional Features

Low-power consumption
Rail-to-rail input and output operation
Wide supply voltage range
High gain bandwidth product
Low input offset voltage and bias current
Stable operation over a wide temperature range

Advantages and Disadvantages

Advantages: - Low power consumption makes it suitable for battery-powered applications. - Rail-to-rail input and output capabilities allow for maximum signal swing. - Wide supply voltage range provides flexibility in various operating conditions. - High gain bandwidth product enables accurate amplification of high-frequency signals. - Low input offset voltage and bias current ensure precise signal conditioning.

Disadvantages: - Limited number of operational amplifiers in a single package. - Not suitable for applications requiring high output current.

Working Principles

The TLV2404IN operates as a voltage amplifier, taking an input voltage and producing an amplified output voltage. It utilizes internal circuitry to provide rail-to-rail input and output operation, allowing it to handle signals that span the entire supply voltage range. The low-power design ensures efficient operation while maintaining high performance characteristics.

Detailed Application Field Plans

The TLV2404IN is commonly used in various applications, including:

Sensor signal conditioning
Audio amplification
Active filters
Data acquisition systems
Battery-powered instrumentation
Portable devices

Detailed and Complete Alternative Models

TLV2402IN: Dual Operational Amplifier with similar specifications and features.
TLV2401IN: Single Operational Amplifier with similar specifications and features.
TLV2404IP: Same as TLV2404IN but in a different package (TSSOP).

Note: This is not an exhaustive list, and there may be other alternative models available from different manufacturers.

Word count: 389 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TLV2404IN v technických řešeních

Sure! Here are 10 common questions and answers related to the application of TLV2404IN in technical solutions:

Q: What is TLV2404IN? A: TLV2404IN is a quad operational amplifier (op-amp) with low power consumption and rail-to-rail input/output capability.
Q: What are the key features of TLV2404IN? A: TLV2404IN features low offset voltage, low input bias current, high open-loop gain, wide bandwidth, and low noise.
Q: What is the typical supply voltage range for TLV2404IN? A: The typical supply voltage range for TLV2404IN is between 2.7V and 5.5V.
Q: Can TLV2404IN be used in single-supply applications? A: Yes, TLV2404IN can be used in both single-supply and dual-supply applications.
Q: What is the maximum output current TLV2404IN can provide? A: TLV2404IN can provide a maximum output current of approximately 30mA.
Q: Is TLV2404IN suitable for precision applications? A: Yes, TLV2404IN is suitable for precision applications due to its low offset voltage and low input bias current.
Q: Can TLV2404IN operate at high temperatures? A: Yes, TLV2404IN has a wide temperature range and can operate reliably at high temperatures up to 125°C.
Q: What is the input voltage range of TLV2404IN? A: The input voltage range of TLV2404IN extends from the negative supply voltage to the positive supply voltage.
Q: Can TLV2404IN be used in audio applications? A: Yes, TLV2404IN can be used in audio applications due to its low noise and wide bandwidth.
Q: Are there any recommended external components for TLV2404IN? A: It is recommended to use decoupling capacitors at the power supply pins of TLV2404IN to minimize noise and ensure stability.

Please note that these answers are general and may vary depending on specific application requirements.