TL16C552AFNRG4

Product Overview

Category: Integrated Circuit (IC)
Use: Serial Communication Controller
Characteristics: High-performance, dual UART with 16-byte FIFOs
Package: QFN (Quad Flat No-Lead) package
Essence: TL16C552AFNRG4 is a versatile serial communication controller designed for various applications requiring reliable and efficient data transfer.
Packaging/Quantity: Available in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

UART Channels: Dual channels
FIFO Size: 16 bytes per channel
Data Rate: Up to 1.5 Mbps
Operating Voltage: 3.3V
Operating Temperature Range: -40°C to +85°C
Interface: Compatible with industry-standard UART protocols
Interrupts: Programmable interrupt capability
Power Management: Low-power standby mode available

Pin Configuration

The TL16C552AFNRG4 has a total of 48 pins. The pin configuration is as follows:

TL16C552AFNRG4 Pin Configuration

Functional Features

Dual UART channels allow simultaneous communication on two different ports.
16-byte FIFOs per channel enable efficient buffering and reduce CPU overhead.
Programmable interrupt capability allows for efficient handling of incoming data.
Industry-standard UART protocols ensure compatibility with a wide range of devices.
Low-power standby mode helps conserve energy when the device is not actively transmitting or receiving data.

Advantages and Disadvantages

Advantages: - High-performance data transfer with up to 1.5 Mbps data rate. - Dual-channel design enables parallel communication on separate ports. - Efficient FIFO buffering reduces CPU load and improves overall system performance. - Wide operating temperature range makes it suitable for various environments.

Disadvantages: - Limited to 3.3V operating voltage, may not be compatible with systems requiring higher voltages. - QFN package may require specialized equipment for soldering and handling.

Working Principles

The TL16C552AFNRG4 is based on the Universal Asynchronous Receiver/Transmitter (UART) architecture. It receives and transmits serial data in a synchronized manner using start and stop bits. The UART channels provide buffering capabilities through the 16-byte FIFOs, allowing for efficient data transfer between the device and external systems. Interrupts can be programmed to trigger when specific events occur, such as receiving a certain number of bytes or detecting errors.

Application Field Plans

The TL16C552AFNRG4 is widely used in various applications that require reliable serial communication. Some potential application fields include:

Industrial Automation: Used in PLCs (Programmable Logic Controllers), SCADA (Supervisory Control and Data Acquisition) systems, and other industrial control devices.
Networking Equipment: Integrated into routers, switches, and network interface cards for efficient data transmission.
Embedded Systems: Utilized in microcontroller-based systems, IoT (Internet of Things) devices, and communication modules.
Medical Devices: Integrated into medical equipment for data exchange and control purposes.
Automotive Electronics: Used in automotive diagnostic tools, infotainment systems, and vehicle communication interfaces.

Alternative Models

TL16C550AFN: Single-channel UART with 16-byte FIFO
TL16C554AFN: Quad-channel UART with 16-byte FIFO per channel
TL16C552BPT: Dual-channel UART with 64-byte FIFO per channel

These alternative models offer different configurations and features to suit specific application requirements.

Note: The content provided above is a sample and may not meet the exact word count requirement of 1100 words.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TL16C552AFNRG4 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of TL16C552AFNRG4 in technical solutions:

Q: What is TL16C552AFNRG4? A: TL16C552AFNRG4 is a dual universal asynchronous receiver/transmitter (UART) integrated circuit that provides two full-duplex channels.
Q: What are the key features of TL16C552AFNRG4? A: Some key features include 16-byte FIFOs, programmable baud rate generators, automatic hardware/software flow control, and support for various data formats.
Q: How can TL16C552AFNRG4 be used in technical solutions? A: TL16C552AFNRG4 can be used in applications requiring serial communication, such as industrial automation, embedded systems, networking equipment, and telecommunications.
Q: What is the maximum baud rate supported by TL16C552AFNRG4? A: TL16C552AFNRG4 supports baud rates up to 1.5 Mbps.
Q: Does TL16C552AFNRG4 support interrupt-driven operation? A: Yes, TL16C552AFNRG4 supports interrupt-driven operation, allowing efficient handling of incoming and outgoing data.
Q: Can TL16C552AFNRG4 operate with different voltage levels? A: Yes, TL16C552AFNRG4 supports both 3.3V and 5V logic levels, making it compatible with a wide range of systems.
Q: Is TL16C552AFNRG4 compatible with standard UART protocols? A: Yes, TL16C552AFNRG4 is fully compatible with industry-standard UART protocols, ensuring interoperability with other UART devices.
Q: Can TL16C552AFNRG4 be used in multi-drop communication systems? A: Yes, TL16C552AFNRG4 supports multi-drop communication by providing a programmable address recognition feature.
Q: Does TL16C552AFNRG4 have built-in error detection and correction mechanisms? A: Yes, TL16C552AFNRG4 includes error detection features like parity generation/checking and framing error detection.
Q: Are there any evaluation boards or development kits available for TL16C552AFNRG4? A: Yes, Texas Instruments provides evaluation boards and development kits that can help in the prototyping and testing of TL16C552AFNRG4-based solutions.

Please note that these answers are general and may vary depending on specific implementation requirements.