Viz Specifikace pro podrobnosti o produktu.
SN74LVT16244BGQLR
Product Overview
Category
The SN74LVT16244BGQLR belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used as a buffer/driver for data transmission in various electronic devices.
Characteristics
- High-speed operation
- Low power consumption
- Wide operating voltage range
- Schmitt-trigger inputs for noise immunity
- 16-bit wide bus interface
- Bidirectional data flow capability
Package
The SN74LVT16244BGQLR is available in a BGA (Ball Grid Array) package.
Essence
The essence of this product lies in its ability to provide efficient and reliable data buffering and driving functions.
Packaging/Quantity
The SN74LVT16244BGQLR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Supply Voltage: 2.7V to 3.6V
- Operating Temperature Range: -40°C to +85°C
- Input/Output Voltage Levels: 5V TTL-compatible
- Output Drive Capability: ±12mA
- Propagation Delay Time: 4.1ns (typical)
- Maximum Operating Frequency: 200MHz
Detailed Pin Configuration
The SN74LVT16244BGQLR has a total of 48 pins, which are assigned specific functions. The pin configuration is as follows:
- OE (Output Enable) 1
- A1 (Address Input) 1
- A2 (Address Input) 2
- GND (Ground)
- Y1 (Data Output) 1
- Y2 (Data Output) 2
- VCC (Supply Voltage)
- B1 (Data Input/Output) 1
- B2 (Data Input/Output) 2
- OE (Output Enable) 2
- A1 (Address Input) 3
- A2 (Address Input) 4
- GND (Ground)
- Y1 (Data Output) 3
- Y2 (Data Output) 4
- VCC (Supply Voltage)
- B1 (Data Input/Output) 3
- B2 (Data Input/Output) 4
- ...
Functional Features
- Bidirectional data flow: Allows data transmission in both directions.
- Output enable control: Enables or disables the outputs as required.
- Schmitt-trigger inputs: Provides noise immunity and ensures reliable operation even in noisy environments.
- Wide operating voltage range: Can operate within a wide range of supply voltages.
- High-speed operation: Facilitates fast data transmission.
Advantages and Disadvantages
Advantages
- Efficient data buffering and driving capabilities
- Low power consumption
- Wide operating voltage range allows compatibility with various systems
- Noise immunity due to Schmitt-trigger inputs
- High-speed operation for fast data transmission
Disadvantages
- Limited output drive capability compared to some other ICs
- Not suitable for applications requiring higher operating frequencies
Working Principles
The SN74LVT16244BGQLR operates by receiving input data through its bidirectional data lines (B1, B2) and transmitting it to the corresponding output lines (Y1, Y2). The direction of data flow is controlled by the output enable pins (OE1, OE2). When the output enable is active, the IC functions as a buffer, allowing data to pass through. Conversely, when the output enable is inactive, the IC isolates the input from the output, preventing data transmission.
Detailed Application Field Plans
The SN74LVT16244BGQLR finds applications in various electronic systems, including but not limited to: - Data communication devices - Computer peripherals - Networking equipment - Industrial automation systems - Automotive electronics
Detailed and Complete Alternative Models
- SN74LVC16244A: Similar functionality with improved output drive capability.
- SN74LVTH16244: Offers lower power consumption and higher operating frequency.
- SN74LVC16244ADGGR: Provides enhanced ESD protection and wider temperature range.
These alternative models offer similar functionalities to the SN74LVT16244BGQLR, with some variations in terms of performance and features.
In conclusion, the SN74LVT16244BGQLR is a versatile integrated circuit that serves as a buffer/driver for data transmission in various electronic devices. Its high-speed operation, low power consumption, and wide operating voltage range make it suitable for a wide range of applications. While it may have limitations in terms of output drive capability and operating frequency, there are alternative models available to address specific requirements.
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací SN74LVT16244BGQLR v technických řešeních
Sure! Here are 10 common questions and answers related to the application of SN74LVT16244BGQLR:
Q: What is SN74LVT16244BGQLR? A: SN74LVT16244BGQLR is a specific type of integrated circuit (IC) known as a 16-bit buffer/driver with 3-state outputs.
Q: What is the purpose of SN74LVT16244BGQLR? A: SN74LVT16244BGQLR is used to provide buffering and driving capabilities for digital signals in various technical solutions.
Q: What voltage levels does SN74LVT16244BGQLR support? A: SN74LVT16244BGQLR supports voltage levels between 2.7V and 3.6V.
Q: How many channels does SN74LVT16244BGQLR have? A: SN74LVT16244BGQLR has 16 channels, allowing it to handle 16 individual digital signals.
Q: Can SN74LVT16244BGQLR be used for bidirectional communication? A: Yes, SN74LVT16244BGQLR supports bidirectional communication, making it suitable for applications where data needs to be transmitted and received.
Q: What is the maximum data transfer rate supported by SN74LVT16244BGQLR? A: SN74LVT16244BGQLR can handle data transfer rates up to 400 Mbps.
Q: Does SN74LVT16244BGQLR have built-in protection features? A: Yes, SN74LVT16244BGQLR includes built-in ESD (electrostatic discharge) protection to safeguard against static electricity damage.
Q: Can SN74LVT16244BGQLR be used in high-speed applications? A: Yes, SN74LVT16244BGQLR is designed to operate at high speeds and is suitable for use in applications that require fast data transmission.
Q: What is the power supply voltage range for SN74LVT16244BGQLR? A: SN74LVT16244BGQLR operates with a power supply voltage range between 2.7V and 3.6V.
Q: Are there any specific precautions to consider when using SN74LVT16244BGQLR? A: It is important to follow the manufacturer's guidelines for proper handling, storage, and usage of SN74LVT16244BGQLR. Additionally, ensure that the IC is properly grounded and protected from excessive heat or static electricity.