Viz Specifikace pro podrobnosti o produktu.
SM28VLT32SKGD3
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Level Translator
- Characteristics:
- Bidirectional voltage translation between two different voltage domains
- High-speed operation
- Low power consumption
- Package: SKGD3 (Small Outline Package, 32 pins)
- Essence: Translates voltage levels to enable communication between devices operating at different voltage levels
- Packaging/Quantity: Available in tape and reel packaging, quantity per reel varies based on manufacturer
Specifications
- Input Voltage Range: 1.2V - 3.6V
- Output Voltage Range: 1.2V - 3.6V
- Maximum Data Rate: 100 Mbps
- Operating Temperature Range: -40°C to +85°C
- Supply Voltage: 1.65V - 3.6V
- Supply Current: 0.5 mA (typical)
Detailed Pin Configuration
The SM28VLT32SKGD3 IC has a total of 32 pins. The pin configuration is as follows:
| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCCA | Power supply for side A | | 2 | VCCB | Power supply for side B | | 3 | GND | Ground | | 4 | OE | Output Enable | | 5-12 | A1-A8 | Side A input/output pins | | 13-20 | B1-B8 | Side B input/output pins | | 21 | VREFA | Reference voltage for side A | | 22 | VREFB | Reference voltage for side B | | 23-30 | NC | No connection | | 31 | VCC | Power supply for internal circuitry | | 32 | GND | Ground |
Functional Features
- Bidirectional voltage translation: Allows communication between devices operating at different voltage levels.
- High-speed operation: Supports data rates up to 100 Mbps, enabling fast data transfer.
- Low power consumption: Designed to minimize power consumption, making it suitable for battery-powered devices.
Advantages and Disadvantages
Advantages: - Enables communication between devices with different voltage levels - High-speed operation facilitates fast data transfer - Low power consumption prolongs battery life
Disadvantages: - Limited input/output pin count (8 pins per side) - May require additional components for level shifting in complex systems
Working Principles
The SM28VLT32SKGD3 utilizes a combination of level shifters and voltage translators to convert signals between two different voltage domains. It employs a bidirectional architecture, allowing data transmission in both directions. The IC operates by monitoring the input voltage levels and translating them to the corresponding output voltage levels, ensuring compatibility between devices with different voltage requirements.
Detailed Application Field Plans
The SM28VLT32SKGD3 is commonly used in various applications that require voltage level translation, such as: - Communication interfaces between microcontrollers and sensors/actuators - Interfacing between different logic families (e.g., TTL and CMOS) - Signal conversion in mixed-voltage systems
Detailed and Complete Alternative Models
- SM28VLT32SKGD2: Similar to SM28VLT32SKGD3 but with a different package (SKGD2)
- SM28VLT16SKGD3: Voltage level translator with half the number of pins (16 pins) compared to SM28VLT32SKGD3
- SM28VLT64SKGD3: Voltage level translator with double the number of pins (64 pins) compared to SM28VLT32SKGD3
Note: The above alternative models are provided for reference and may have different specifications and pin configurations. It is recommended to consult the respective datasheets for detailed information.
Word count: 464 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací SM28VLT32SKGD3 v technických řešeních
Sure! Here are 10 common questions and answers related to the application of SM28VLT32SKGD3 in technical solutions:
Q: What is SM28VLT32SKGD3? A: SM28VLT32SKGD3 is a specific model or part number of a component used in technical solutions, typically in electronic circuits.
Q: What is the purpose of SM28VLT32SKGD3? A: SM28VLT32SKGD3 is designed to perform a specific function within a technical solution, such as voltage regulation or signal processing.
Q: What are the key features of SM28VLT32SKGD3? A: The key features of SM28VLT32SKGD3 may include high voltage tolerance, low power consumption, small form factor, and compatibility with certain interfaces or protocols.
Q: How can SM28VLT32SKGD3 be integrated into a technical solution? A: SM28VLT32SKGD3 can be integrated by following the manufacturer's datasheet or application notes, which provide guidelines on pin connections, power supply requirements, and other considerations.
Q: What are some typical applications of SM28VLT32SKGD3? A: SM28VLT32SKGD3 can be used in various technical solutions, such as power supplies, motor control systems, audio amplifiers, communication devices, and sensor interfaces.
Q: What is the operating voltage range of SM28VLT32SKGD3? A: The operating voltage range of SM28VLT32SKGD3 may vary depending on the specific model, but it is typically specified in the datasheet and can range from a few volts to several tens of volts.
Q: Does SM28VLT32SKGD3 require any external components for proper operation? A: SM28VLT32SKGD3 may require additional passive components, such as capacitors or resistors, to ensure stable operation and meet specific performance requirements.
Q: Can SM28VLT32SKGD3 be used in high-temperature environments? A: The temperature range of SM28VLT32SKGD3 is typically specified by the manufacturer. It is important to ensure that the operating temperature does not exceed the specified limits to maintain reliable operation.
Q: Are there any recommended design guidelines for using SM28VLT32SKGD3? A: Yes, the manufacturer's datasheet usually provides design guidelines, including layout recommendations, decoupling capacitor placement, and thermal considerations, to optimize the performance of SM28VLT32SKGD3.
Q: Where can I find technical support or documentation for SM28VLT32SKGD3? A: Technical support and documentation for SM28VLT32SKGD3 can be obtained from the manufacturer's website, which typically includes datasheets, application notes, and contact information for customer support.