Texas Instruments
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
OPA548TG3
Zobrazit detail DataSheets

OPA548TG3

Product Overview

Category: Integrated Circuits (ICs)

Use: The OPA548TG3 is a high-performance, high-power operational amplifier designed for various applications in the field of electronics.

Characteristics: - High power output capability - Wide bandwidth - Low distortion - High slew rate - Excellent stability

Package: TO-220-5 package

Essence: The OPA548TG3 is an essential component in electronic circuits that require high-power amplification and precise signal processing.

Packaging/Quantity: The OPA548TG3 is typically sold in reels or tubes containing 50 units per package.

Specifications

  • Supply Voltage Range: ±10V to ±40V
  • Output Power: Up to 60W
  • Input Offset Voltage: ±1mV
  • Input Bias Current: ±2.5µA
  • Bandwidth: 1MHz
  • Slew Rate: 20V/µs
  • Total Harmonic Distortion: 0.01%
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The OPA548TG3 has a total of five pins:

  1. V+: Positive supply voltage pin.
  2. V-: Negative supply voltage pin.
  3. IN-: Inverting input pin.
  4. IN+: Non-inverting input pin.
  5. OUT: Output pin.

Functional Features

  • High power output: The OPA548TG3 can deliver up to 60W of power, making it suitable for applications requiring high-power amplification.
  • Wide bandwidth: With a bandwidth of 1MHz, the OPA548TG3 can handle a wide range of frequencies.
  • Low distortion: The amplifier exhibits low harmonic distortion, ensuring accurate signal reproduction.
  • High slew rate: The high slew rate of 20V/µs enables the amplifier to respond quickly to input signal changes.
  • Excellent stability: The OPA548TG3 offers excellent stability, ensuring reliable performance over time.

Advantages and Disadvantages

Advantages: - High power output capability - Wide bandwidth for versatile applications - Low distortion for accurate signal reproduction - High slew rate for fast response - Excellent stability for reliable performance

Disadvantages: - Relatively high cost compared to lower-power amplifiers - Requires a dual power supply for operation

Working Principles

The OPA548TG3 is based on a class AB amplifier architecture. It utilizes a combination of bipolar and MOSFET transistors to achieve high power output while maintaining low distortion. The amplifier operates in a push-pull configuration, allowing it to deliver both positive and negative voltage swings with minimal crossover distortion. The input signal is amplified and then delivered to the output pin, providing a high-power, low-distortion output signal.

Detailed Application Field Plans

The OPA548TG3 finds applications in various fields, including: 1. Audio amplification systems 2. Industrial control systems 3. Power supply circuits 4. Instrumentation and measurement equipment 5. Automotive electronics

Detailed and Complete Alternative Models

  1. OPA549TG3: Similar to the OPA548TG3 but with higher output power capability (up to 100W).
  2. OPA547TG3: Lower-power version of the OPA548TG3, suitable for applications requiring less power (up to 30W).
  3. OPA546TG3: Compact version of the OPA548TG3, designed for space-constrained applications (up to 40W).

These alternative models offer similar characteristics and functionality to the OPA548TG3, catering to different power requirements and form factors.

Word count: 536 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací OPA548TG3 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of OPA548TG3 in technical solutions:

  1. Q: What is the OPA548TG3? A: The OPA548TG3 is a high-power, high-voltage operational amplifier designed for various technical applications.

  2. Q: What is the maximum power output of the OPA548TG3? A: The OPA548TG3 can deliver up to 60 watts of continuous power output.

  3. Q: What is the input voltage range of the OPA548TG3? A: The OPA548TG3 has an input voltage range of ±40V.

  4. Q: Can the OPA548TG3 operate with a single power supply? A: Yes, the OPA548TG3 can operate with a single power supply ranging from 20V to 60V.

  5. Q: What are some typical applications of the OPA548TG3? A: The OPA548TG3 is commonly used in audio amplifiers, motor control systems, power supplies, and industrial automation.

  6. Q: Does the OPA548TG3 require external compensation components? A: No, the OPA548TG3 is internally compensated and does not require any external compensation components.

  7. Q: What is the thermal shutdown feature of the OPA548TG3? A: The OPA548TG3 has built-in thermal shutdown protection that activates when the chip temperature exceeds a safe limit, preventing damage.

  8. Q: Can the OPA548TG3 handle reactive loads such as capacitive or inductive loads? A: Yes, the OPA548TG3 is capable of driving reactive loads, but appropriate precautions should be taken to ensure stability.

  9. Q: What is the maximum output current of the OPA548TG3? A: The OPA548TG3 can deliver a maximum output current of 10A.

  10. Q: Is the OPA548TG3 suitable for high-fidelity audio applications? A: While the OPA548TG3 can be used in audio applications, it is primarily designed for high-power and industrial applications rather than high-fidelity audio.

Please note that these answers are general and may vary depending on specific application requirements.