Viz Specifikace pro podrobnosti o produktu.
LM3S801-EGZ50-C2
Product Overview
Category
The LM3S801-EGZ50-C2 belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.
Characteristics
- High-performance 32-bit ARM Cortex-M3 core
- Clock speed: 50 MHz
- Flash memory: 64 KB
- RAM: 8 KB
- Low power consumption
- Multiple communication interfaces (UART, SPI, I2C)
- Analog-to-digital converter (ADC)
- Timers and PWM outputs
- GPIO pins for general-purpose input/output
Package
The LM3S801-EGZ50-C2 comes in a small form factor package suitable for surface mount technology (SMT) assembly.
Essence
This microcontroller serves as the brain of electronic devices, enabling them to execute programmed instructions and interact with external components.
Packaging/Quantity
The LM3S801-EGZ50-C2 is typically packaged in reels or trays, with quantities varying based on customer requirements.
Specifications
- Microcontroller: LM3S801
- Core: ARM Cortex-M3
- Clock Speed: 50 MHz
- Flash Memory: 64 KB
- RAM: 8 KB
- Operating Voltage: 3.3V
- Communication Interfaces: UART, SPI, I2C
- Analog-to-Digital Converter (ADC): 10-bit resolution
- Timers: 4 x 16-bit timers
- PWM Outputs: 6 channels
- GPIO Pins: 30
Detailed Pin Configuration
The LM3S801-EGZ50-C2 has a total of 48 pins, which are assigned for various functions such as power supply, communication, I/O, and control. The pin configuration is as follows:
- Pin 1: VDD (Power Supply)
- Pin 2: VSS (Ground)
- Pin 3: UART0_TX (UART Transmit)
- Pin 4: UART0_RX (UART Receive)
- Pin 5: SPI0_CLK (SPI Clock)
- Pin 6: SPI0_MISO (SPI Master In Slave Out)
- Pin 7: SPI0_MOSI (SPI Master Out Slave In)
- Pin 8: I2C0_SCL (I2C Serial Clock)
- Pin 9: I2C0_SDA (I2C Serial Data)
- ...
- Pin 48: RESET (Reset)
Functional Features
The LM3S801-EGZ50-C2 offers several functional features that enhance its usability and performance:
- High-performance ARM Cortex-M3 core provides efficient processing capabilities.
- Multiple communication interfaces (UART, SPI, I2C) enable seamless connectivity with other devices.
- Analog-to-digital converter (ADC) allows for precise measurement of analog signals.
- Timers and PWM outputs facilitate accurate timing and control of external components.
- GPIO pins provide flexibility for general-purpose input/output operations.
Advantages and Disadvantages
Advantages
- High-performance processing capabilities
- Low power consumption
- Versatile communication interfaces
- Ample flash memory and RAM for program storage and data handling
- Precise analog signal measurement capability
- Flexible general-purpose input/output operations
Disadvantages
- Limited flash memory and RAM compared to higher-end microcontrollers
- Relatively fewer GPIO pins compared to some other models
Working Principles
The LM3S801-EGZ50-C2 operates based on the principles of a microcontroller. It executes instructions stored in its flash memory, processes data, and interacts with external components through various communication interfaces and I/O pins. The ARM Cortex-M3 core provides the necessary computational power, while the peripherals and interfaces enable seamless integration with other devices.
Detailed Application Field Plans
The LM3S801-EGZ50-C2 finds applications in various fields, including but not limited to:
- Industrial automation: Control systems for machinery and equipment.
- Consumer electronics: Smart home devices, wearable technology, and entertainment systems.
- Automotive: Vehicle control units, infotainment systems, and driver assistance systems.
- Medical devices: Monitoring and diagnostic equipment.
- Internet of Things (IoT): Connected devices and sensor networks.
Detailed and Complete Alternative Models
- LM3S811-EGZ50-C2: Similar to LM3S801-EGZ50-C2 but with additional features.
- LM3S821-EGZ50-C2: Higher-end version with increased flash memory and RAM capacity.
- LM3S831-EGZ50-C2: Enhanced model with advanced communication interfaces and extended GPIO pins.
These alternative models offer varying specifications and features to cater to different application requirements.
In conclusion, the LM3
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LM3S801-EGZ50-C2 v technických řešeních
Sure! Here are 10 common questions and answers related to the application of LM3S801-EGZ50-C2 in technical solutions:
1. What is LM3S801-EGZ50-C2? - LM3S801-EGZ50-C2 is a microcontroller from Texas Instruments' Stellaris family, specifically designed for embedded applications.
2. What are the key features of LM3S801-EGZ50-C2? - Some key features of LM3S801-EGZ50-C2 include a 32-bit ARM Cortex-M3 processor, 50 MHz clock speed, 64 KB flash memory, 8 KB RAM, and various peripherals like UART, I2C, SPI, GPIO, etc.
3. What are the typical applications of LM3S801-EGZ50-C2? - LM3S801-EGZ50-C2 can be used in a wide range of applications such as industrial automation, consumer electronics, medical devices, home automation, robotics, and more.
4. How can I program LM3S801-EGZ50-C2? - LM3S801-EGZ50-C2 can be programmed using various development tools like Keil MDK, Code Composer Studio, or Energia IDE. These tools provide an integrated development environment for writing, compiling, and debugging code.
5. Can LM3S801-EGZ50-C2 communicate with other devices? - Yes, LM3S801-EGZ50-C2 has built-in communication peripherals like UART, I2C, and SPI, which allow it to communicate with other devices such as sensors, displays, actuators, and more.
6. How can I interface external components with LM3S801-EGZ50-C2? - LM3S801-EGZ50-C2 has a variety of general-purpose input/output (GPIO) pins that can be used to interface with external components. These pins can be configured as inputs or outputs and can be used to connect sensors, buttons, LEDs, etc.
7. Can LM3S801-EGZ50-C2 support real-time operating systems (RTOS)? - Yes, LM3S801-EGZ50-C2 is capable of running real-time operating systems like FreeRTOS or Micrium uC/OS-II. These RTOS provide task scheduling, inter-task communication, and other features to simplify the development of complex applications.
8. What kind of power supply does LM3S801-EGZ50-C2 require? - LM3S801-EGZ50-C2 typically operates at a voltage range of 2.7V to 3.6V. It can be powered by a regulated power supply or a battery, depending on the application requirements.
9. Is LM3S801-EGZ50-C2 suitable for low-power applications? - Yes, LM3S801-EGZ50-C2 has various power-saving features like multiple sleep modes, clock gating, and peripheral shutdown. These features help in reducing power consumption, making it suitable for low-power applications.
10. Are there any development boards available for LM3S801-EGZ50-C2? - Yes, Texas Instruments offers development boards like the Stellaris LM3S811 Evaluation Kit, which includes the LM3S801-EGZ50-C2 microcontroller. These boards provide a convenient platform for prototyping and testing applications based on LM3S801-EGZ50-C2.
Please note that the specific details and answers may vary depending on the context and requirements of your technical solution.