Texas Instruments
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
LM25116MHX/NOPB
Zobrazit detail DataSheets

LM25116MHX/NOPB

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Wide Input Voltage Range, Adjustable Output Voltage, Synchronous Buck Converter
  • Package: 20-Pin HTSSOP PowerPAD
  • Essence: Step-Down (Buck) Switching Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 42V
  • Output Voltage Range: 0.8V to 37V
  • Switching Frequency: 100kHz to 2.2MHz
  • Maximum Output Current: 1.5A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The LM25116MHX/NOPB has a 20-pin HTSSOP package with the following pin configuration:

  1. VIN: Input Voltage
  2. BOOT: Bootstrap Capacitor Connection
  3. SW: Switch Node Connection
  4. PGND: Power Ground
  5. AGND: Analog Ground
  6. FB: Feedback Voltage Input
  7. COMP: Compensation Node
  8. SS/TR: Soft-Start/Tracking Control
  9. EN: Enable Pin
  10. VCC: Supply Voltage for Internal Circuitry
  11. BST: Boost Capacitor Connection
  12. PG: Power Good Indicator
  13. SS/TR: Soft-Start/Tracking Control
  14. RT/CLK: Oscillator Resistor/Clock Synchronization
  15. SYNC: External Clock Synchronization
  16. VSENSE: Current Sense Input
  17. ITH: Current Limit Threshold Setting
  18. SS/TR: Soft-Start/Tracking Control
  19. AGND: Analog Ground
  20. VOUT: Output Voltage

Functional Features

  • High efficiency conversion of input voltage to adjustable output voltage.
  • Wide input voltage range allows for versatile applications.
  • Synchronous buck converter architecture for improved efficiency.
  • Integrated power MOSFETs for reduced external component count.
  • Adjustable soft-start and tracking control for controlled startup.
  • Power good indicator for monitoring the output voltage stability.

Advantages and Disadvantages

Advantages

  • High efficiency operation saves power and reduces heat dissipation.
  • Wide input voltage range enables usage in various power supply systems.
  • Adjustable output voltage provides flexibility for different applications.
  • Compact package size saves board space.
  • Integrated power MOSFETs simplify the design and reduce costs.

Disadvantages

  • Limited maximum output current (1.5A) may not be suitable for high-power applications.
  • Requires careful consideration of thermal management due to high efficiency operation.

Working Principles

The LM25116MHX/NOPB is a step-down switching regulator that converts a higher input voltage to a lower output voltage. It utilizes a synchronous buck converter architecture, where power MOSFETs are used to switch the input voltage across an inductor and then filtered to provide the desired output voltage. The integrated control circuitry ensures efficient power transfer by adjusting the duty cycle of the switching waveform based on the feedback voltage.

Detailed Application Field Plans

The LM25116MHX/NOPB is commonly used in various applications, including:

  1. Industrial Power Supplies
  2. Automotive Electronics
  3. Telecommunications Equipment
  4. Distributed Power Systems
  5. Battery-Powered Devices

Detailed and Complete Alternative Models

Some alternative models to the LM25116MHX/NOPB include:

  1. LM2596S-ADJ
  2. LM2678SX-ADJ
  3. TPS5430DDAR
  4. LT8611EMSE#PBF
  5. MAX5033DASA+

These models offer similar functionality and can be considered as alternatives based on specific requirements.

Word count: 533 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LM25116MHX/NOPB v technických řešeních

  1. Q: What is the input voltage range of LM25116MHX/NOPB? A: The input voltage range is 4.5V to 42V.

  2. Q: What is the maximum output current of LM25116MHX/NOPB? A: The maximum output current is 1.5A.

  3. Q: Can LM25116MHX/NOPB be used in automotive applications? A: Yes, it is suitable for automotive applications.

  4. Q: What is the switching frequency of LM25116MHX/NOPB? A: The switching frequency can be programmed from 100kHz to 1MHz.

  5. Q: Does LM25116MHX/NOPB have overcurrent protection? A: Yes, it has cycle-by-cycle current limit and hiccup mode short-circuit protection.

  6. Q: Is the LM25116MHX/NOPB available in a thermally enhanced package? A: Yes, it is available in a thermally enhanced HTSSOP package.

  7. Q: Can LM25116MHX/NOPB operate in a wide temperature range? A: Yes, it can operate in a temperature range of -40°C to 125°C.

  8. Q: What type of control mode does LM25116MHX/NOPB use? A: It uses voltage mode control.

  9. Q: Does LM25116MHX/NOPB have adjustable soft-start functionality? A: Yes, it has an adjustable soft-start feature.

  10. Q: Is there a reference design available for using LM25116MHX/NOPB in a specific application? A: Yes, reference designs are available for various applications including power supplies and LED lighting.