STM32F301K6U7TR

Product Overview

Use

This microcontroller is designed for various embedded applications that require high performance and low power consumption.

Characteristics

High-performance ARM Cortex-M4 core
Clock frequency up to 72 MHz
Flash memory capacity of 32 KB
RAM capacity of 6 KB
Low power consumption
Wide operating voltage range (2.0V to 3.6V)
Rich set of peripherals (UART, SPI, I2C, ADC, etc.)

Package

The STM32F301K6U7TR is available in a small LQFP package, which stands for Low-profile Quad Flat Package. This package provides ease of integration into compact designs.

Essence

The essence of the STM32F301K6U7TR lies in its powerful processing capabilities, low power consumption, and versatile peripheral options. It offers a balance between performance and energy efficiency.

Packaging/Quantity

The STM32F301K6U7TR is typically packaged in reels containing 2500 units per reel.

Specifications

Microcontroller: STM32F301K6U7
Core: ARM Cortex-M4
Clock Frequency: Up to 72 MHz
Flash Memory: 32 KB
RAM: 6 KB
Operating Voltage Range: 2.0V to 3.6V
Package Type: LQFP
Package Dimensions: 32-pin, 7x7 mm

Detailed Pin Configuration

The STM32F301K6U7TR has a total of 32 pins. The pin configuration is as follows:

PA0 - GPIO or ADC
PA1 - GPIO or ADC
PA2 - GPIO or ADC
PA3 - GPIO or ADC
PA4 - GPIO or ADC
PA5 - GPIO or ADC
PA6 - GPIO or ADC
PA7 - GPIO or ADC
PB0 - GPIO or ADC
PB1 - GPIO or ADC
PB2 - GPIO or ADC
PB3 - GPIO or ADC
PB4 - GPIO or ADC
PB5 - GPIO or ADC
PB6 - GPIO or ADC
PB7 - GPIO or ADC
PC0 - GPIO or ADC
PC1 - GPIO or ADC
PC2 - GPIO or ADC
PC3 - GPIO or ADC
PC4 - GPIO or ADC
PC5 - GPIO or ADC
PC6 - GPIO or ADC
PC7 - GPIO or ADC
VDD - Power Supply (2.0V to 3.6V)
GND - Ground
NRST - Reset Pin
VSSA - Analog Ground
VREF+ - Reference Voltage for ADC
VDDA - Analog Power Supply (2.0V to 3.6V)
BOOT0 - Boot Mode Selection
SWCLK/SWCLK - Serial Wire Debug and Programming Interface

Functional Features

High-performance processing capabilities
Low power consumption for energy-efficient designs
Versatile peripheral options for various applications
Flexible GPIO pins for general-purpose input/output operations
Analog-to-Digital Converter (ADC) for precise analog measurements
Serial communication interfaces (UART, SPI, I2C) for data exchange
Timers and PWM outputs for precise timing control
DMA controller for efficient data transfer
Real-Time Clock (RTC) for timekeeping applications

Advantages and Disadvantages

Advantages

Powerful processing capabilities for demanding applications
Low power consumption for energy-efficient designs
Versatile peripheral options provide flexibility in design
Compact package size allows integration into space-constrained designs
Wide operating voltage range enables compatibility with various power sources

Disadvantages

Limited flash memory capacity compared to higher-end microcontrollers
Relatively small RAM capacity may restrict the complexity of applications
Availability of alternative models with more features and resources

Working Principles

The STM32F301K6U7TR operates based on the ARM Cortex-M4 core, which provides high-performance processing capabilities. It executes instructions stored in its flash memory and utilizes its peripherals to interact with external devices. The microcontroller can be programmed using various development tools and software environments.

Detailed Application Field Plans

The STM32F301K6U7TR is suitable for a wide range of embedded applications, including but not limited to: - Industrial automation systems - Consumer electronics - Internet of Things (IoT) devices -

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací STM32F301K6U7TR v technických řešeních

Sure! Here are 10 common questions and answers related to the application of STM32F301K6U7TR in technical solutions:

Q: What is the STM32F301K6U7TR microcontroller used for? A: The STM32F301K6U7TR is a microcontroller from STMicroelectronics, commonly used in various technical solutions such as industrial automation, consumer electronics, and IoT devices.
Q: What is the maximum clock frequency of the STM32F301K6U7TR? A: The STM32F301K6U7TR can operate at a maximum clock frequency of 72 MHz.
Q: How much flash memory does the STM32F301K6U7TR have? A: The STM32F301K6U7TR has 32 KB of flash memory for storing program code.
Q: Can I expand the memory of the STM32F301K6U7TR? A: No, the STM32F301K6U7TR does not support external memory expansion. However, it does have 8 KB of RAM for data storage.
Q: What peripherals are available on the STM32F301K6U7TR? A: The STM32F301K6U7TR includes various peripherals such as UART, SPI, I2C, ADC, timers, and GPIO pins for interfacing with other devices.
Q: Does the STM32F301K6U7TR support USB connectivity? A: Yes, the STM32F301K6U7TR supports USB 2.0 Full Speed (12 Mbps) connectivity, allowing it to communicate with USB devices.
Q: Can I use the STM32F301K6U7TR for real-time applications? A: Yes, the STM32F301K6U7TR is equipped with a real-time clock (RTC) and various timers, making it suitable for real-time applications.
Q: What development tools can I use for programming the STM32F301K6U7TR? A: You can use STMicroelectronics' STM32CubeIDE or other popular IDEs like Keil MDK or IAR Embedded Workbench for programming the STM32F301K6U7TR.
Q: Is the STM32F301K6U7TR compatible with Arduino? A: No, the STM32F301K6U7TR does not have native compatibility with the Arduino ecosystem. However, there are libraries and resources available to help integrate it with Arduino-like environments.
Q: Where can I find documentation and support for the STM32F301K6U7TR? A: You can find the datasheet, reference manual, and other technical documents on STMicroelectronics' website. Additionally, there are online forums and communities where you can seek support from fellow developers.