STMicroelectronics
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
STB20N65M5
Zobrazit detail DataSheets

STB20N65M5

Introduction

The STB20N65M5 is a power MOSFET belonging to the category of semiconductor devices. This device is widely used in various electronic applications due to its unique characteristics and performance capabilities.

Basic Information Overview

  • Category: Power MOSFET
  • Use: The STB20N65M5 is used as a switching device in power supply circuits, motor control, and other high-power applications.
  • Characteristics: This MOSFET offers low on-state resistance, high switching speed, and low gate charge, making it suitable for high-efficiency power conversion.
  • Package: The STB20N65M5 is available in a TO-220 package, which provides good thermal performance and ease of mounting.
  • Essence: This MOSFET is designed to handle high power levels with minimal losses, making it an ideal choice for power electronics applications.
  • Packaging/Quantity: The STB20N65M5 is typically supplied in reels or tubes, with quantities varying based on manufacturer and distributor specifications.

Specifications

  • Voltage Rating: 650V
  • Current Rating: 20A
  • On-State Resistance (RDS(on)): 0.25 ohms
  • Gate-Source Voltage (VGS(th)): 4V to 5V
  • Maximum Operating Temperature: 150°C
  • Package Type: TO-220

Detailed Pin Configuration

The STB20N65M5 features a standard TO-220 pin configuration with three leads: gate, drain, and source. The pinout is as follows: - Pin 1: Gate - Pin 2: Drain - Pin 3: Source

Functional Features

  • Low On-State Resistance: Enables efficient power transfer and reduces conduction losses.
  • High Switching Speed: Facilitates rapid switching transitions, suitable for high-frequency applications.
  • Low Gate Charge: Allows for fast and efficient control of the MOSFET, minimizing switching losses.

Advantages and Disadvantages

Advantages

  • High power handling capability
  • Low on-state resistance for reduced power dissipation
  • Fast switching speed for improved efficiency

Disadvantages

  • Sensitivity to voltage spikes and transients
  • Gate drive circuitry complexity for optimal performance

Working Principles

The STB20N65M5 operates based on the principles of field-effect transistors, utilizing the control of the gate-source voltage to modulate the conductivity between the drain and source terminals. When the gate-source voltage is applied, the MOSFET enters either the on-state or off-state, allowing or blocking the flow of current between the drain and source.

Detailed Application Field Plans

The STB20N65M5 finds extensive use in the following application fields: - Switched-mode power supplies - Motor control systems - Inverters and converters for renewable energy systems - Industrial power electronics

Detailed and Complete Alternative Models

  • STB19N65M5: Similar specifications with slight variations in performance characteristics
  • STB21N65M5: Higher current rating and lower on-state resistance for more demanding applications
  • STB18N65M5: Lower cost alternative with slightly reduced performance parameters

In conclusion, the STB20N65M5 power MOSFET offers a balance of performance, efficiency, and reliability, making it a preferred choice for various power electronics applications.

[Word Count: 498]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací STB20N65M5 v technických řešeních

  1. What is the maximum drain-source voltage of STB20N65M5?

    • The maximum drain-source voltage of STB20N65M5 is 650V.

  2. What is the continuous drain current rating of STB20N65M5?

    • The continuous drain current rating of STB20N65M5 is 20A.

  3. What is the on-state resistance (RDS(on)) of STB20N65M5?

    • The on-state resistance (RDS(on)) of STB20N65M5 is typically 0.165 ohms.

  4. What is the gate threshold voltage of STB20N65M5?

    • The gate threshold voltage of STB20N65M5 is typically 3V.

  5. What are the typical applications for STB20N65M5?

    • STB20N65M5 is commonly used in applications such as power supplies, motor control, and lighting.

  6. Is STB20N65M5 suitable for high-frequency switching applications?

    • Yes, STB20N65M5 is suitable for high-frequency switching due to its low RDS(on) and fast switching characteristics.

  7. Does STB20N65M5 require a heatsink for operation?

    • It is recommended to use a heatsink with STB20N65M5 to ensure proper thermal management, especially in high-power applications.

  8. What is the operating temperature range of STB20N65M5?

    • STB20N65M5 has an operating temperature range of -55°C to 150°C.

  9. Can STB20N65M5 be used in automotive applications?

    • Yes, STB20N65M5 is suitable for automotive applications, provided it meets the specific requirements and standards for automotive electronics.

  10. Are there any important considerations for driving STB20N65M5 in a circuit?

    • It's important to ensure proper gate drive voltage and current to fully enhance the performance of STB20N65M5, as well as to protect it from overvoltage or overcurrent conditions.