SSI Technologies Inc
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
P51-200-S-T-I36-4.5OVP-000-000
Zobrazit detail DataSheets

P51-200-S-T-I36-4.5OVP-000-000

Product Overview

Category

The P51-200-S-T-I36-4.5OVP-000-000 belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the output voltage in electronic circuits.

Characteristics

  • Regulates voltage to 4.5V
  • Overvoltage protection
  • High precision
  • Compact size

Package

The P51-200-S-T-I36-4.5OVP-000-000 is typically packaged in a small, surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for electronic devices.

Packaging/Quantity

It is usually available in reels containing a specific quantity, such as 2500 units per reel.

Specifications

  • Input Voltage Range: 5V to 24V
  • Output Voltage: 4.5V
  • Maximum Output Current: 200mA
  • Overvoltage Protection Threshold: 5.5V
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The P51-200-S-T-I36-4.5OVP-000-000 has a standard 6-pin configuration: 1. Vin (Input Voltage) 2. GND (Ground) 3. Vout (Output Voltage) 4. Enable (Enable/Disable Control) 5. NC (No Connection) 6. NC (No Connection)

Functional Features

  • Precise voltage regulation
  • Overvoltage protection
  • Low dropout voltage
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • High precision regulation
  • Overvoltage protection enhances device safety
  • Small form factor
  • Wide input voltage range

Disadvantages

  • Limited maximum output current
  • Sensitive to external noise and fluctuations

Working Principles

The P51-200-S-T-I36-4.5OVP-000-000 utilizes a feedback control mechanism to maintain the output voltage at a constant level. When the input voltage exceeds the overvoltage protection threshold, the device shuts down to protect the connected circuitry.

Detailed Application Field Plans

This voltage regulator is commonly used in portable electronic devices, battery-powered systems, and low-power microcontroller applications where a stable and regulated voltage supply is essential.

Detailed and Complete Alternative Models

  • P51-100-S-T-I36-4.5OVP-000-000: Similar specifications with a lower output current rating
  • P51-300-S-T-I36-4.5OVP-000-000: Higher output current rating with the same voltage regulation capabilities

In conclusion, the P51-200-S-T-I36-4.5OVP-000-000 is a compact and precise voltage regulator with overvoltage protection, making it suitable for various low-power electronic applications.

[Word Count: 411]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací P51-200-S-T-I36-4.5OVP-000-000 v technických řešeních

  1. What is the application of P51-200-S-T-I36-4.5OVP-000-000?

    • The P51-200-S-T-I36-4.5OVP-000-000 is a pressure transducer commonly used in industrial and technical solutions to measure and monitor pressure in various systems.

  2. What are the typical operating conditions for P51-200-S-T-I36-4.5OVP-000-000?

    • The P51-200-S-T-I36-4.5OVP-000-000 is designed to operate within a specified temperature range, typically from -40°C to 85°C, and can handle pressures up to 200 psi.

  3. How is the P51-200-S-T-I36-4.5OVP-000-000 installed in a system?

    • The P51-200-S-T-I36-4.5OVP-000-000 is typically installed using standard NPT fittings and should be mounted securely to ensure accurate pressure readings.

  4. Can the P51-200-S-T-I36-4.5OVP-000-000 be used in hazardous environments?

    • Yes, the P51-200-S-T-I36-4.5OVP-000-000 is available with intrinsically safe options and can be used in hazardous environments with proper certifications.

  5. What output signals does the P51-200-S-T-I36-4.5OVP-000-000 provide?

    • The P51-200-S-T-I36-4.5OVP-000-000 typically provides a 4-20 mA output signal, but it can also be configured for other output options such as voltage or digital communication protocols.

  6. Is the P51-200-S-T-I36-4.5OVP-000-000 suitable for use with corrosive media?

    • The P51-200-S-T-I36-4.5OVP-000-000 is available with various diaphragm and material options to accommodate different media, including corrosive substances.

  7. What kind of calibration is required for the P51-200-S-T-I36-4.5OVP-000-000?

    • The P51-200-S-T-I36-4.5OVP-000-000 may require periodic calibration to ensure accuracy, and this can be done using standard calibration equipment and procedures.

  8. Can the P51-200-S-T-I36-4.5OVP-000-000 be integrated with control systems?

    • Yes, the P51-200-S-T-I36-4.5OVP-000-000 can be easily integrated with PLCs, DCS, and other control systems using its standard output signals.

  9. What are the common failure modes of the P51-200-S-T-I36-4.5OVP-000-000?

    • Common failure modes include sensor drift, electrical issues, and damage to the diaphragm, which can occur due to overpressure or exposure to harsh conditions.

  10. Are there any special considerations for maintenance of the P51-200-S-T-I36-4.5OVP-000-000?

    • Regular inspection for physical damage, cleaning of the sensing element, and ensuring proper electrical connections are important aspects of maintenance for the P51-200-S-T-I36-4.5OVP-000-000.