SZBZX84C30LT1G

Product Overview

Category: Voltage Regulator
Use: Regulating voltage in electronic circuits
Characteristics: Low dropout, low quiescent current, high accuracy
Package: SOT-23
Essence: Integrated circuit for voltage regulation
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

Output Voltage: 3.0V
Input Voltage Range: 4.5V to 18V
Dropout Voltage: 300mV at 150mA
Quiescent Current: 75µA
Line Regulation: 0.2%
Load Regulation: 0.4%
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The SZBZX84C30LT1G has three pins: 1. Input (VIN): Connects to the input voltage source. 2. Ground (GND): Connected to the ground of the circuit. 3. Output (VOUT): Provides the regulated output voltage.

Functional Features

Low dropout voltage enables efficient regulation even with small voltage differentials.
Low quiescent current minimizes power consumption in standby mode.
High accuracy ensures precise voltage regulation across varying loads and temperatures.

Advantages and Disadvantages

Advantages: - Efficient voltage regulation with low dropout voltage. - Minimal power consumption in standby mode. - High accuracy for precise voltage regulation.

Disadvantages: - Limited input voltage range compared to some other regulators. - SOT-23 package may require careful handling during assembly.

Working Principles

The SZBZX84C30LT1G utilizes a bandgap reference and error amplifier to compare the output voltage to a fixed reference. It adjusts the pass transistor to maintain a stable output voltage despite variations in input voltage and load.

Detailed Application Field Plans

The SZBZX84C30LT1G is suitable for various applications requiring a stable 3.0V supply, such as: - Battery-powered devices - Portable electronics - Sensor modules - Wearable devices

Detailed and Complete Alternative Models

LM2937-3.0: Similar low dropout voltage regulator with SOT-223 package.
XC6206P302MR: Ultra-low quiescent current regulator in SOT-23 package.
MIC5205-3.0YM5: High-accuracy voltage regulator with SOT-23-5 package.

In conclusion, the SZBZX84C30LT1G is a versatile voltage regulator with low dropout, low quiescent current, and high accuracy, making it suitable for a wide range of portable and battery-powered electronic applications.

Word count: 332

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací SZBZX84C30LT1G v technických řešeních

What is the maximum power dissipation of SZBZX84C30LT1G?
- The maximum power dissipation of SZBZX84C30LT1G is 225mW.
What is the maximum forward voltage drop across SZBZX84C30LT1G?
- The maximum forward voltage drop across SZBZX84C30LT1G is 0.9V at a forward current of 20mA.
What is the reverse breakdown voltage of SZBZX84C30LT1G?
- The reverse breakdown voltage of SZBZX84C30LT1G is 30V.
What is the operating temperature range for SZBZX84C30LT1G?
- The operating temperature range for SZBZX84C30LT1G is -40°C to 125°C.
What is the typical output current of SZBZX84C30LT1G?
- The typical output current of SZBZX84C30LT1G is 20mA.
What is the package type of SZBZX84C30LT1G?
- SZBZX84C30LT1G comes in a SOT-23 package.
Can SZBZX84C30LT1G be used for voltage regulation in low-power applications?
- Yes, SZBZX84C30LT1G is suitable for voltage regulation in low-power applications.
Is SZBZX84C30LT1G suitable for battery-powered devices?
- Yes, SZBZX84C30LT1G is suitable for battery-powered devices due to its low power dissipation.
What are the typical applications of SZBZX84C30LT1G?
- SZBZX84C30LT1G is commonly used in voltage regulation, signal conditioning, and power management applications.
Does SZBZX84C30LT1G have built-in overcurrent protection?
- No, SZBZX84C30LT1G does not have built-in overcurrent protection and should be used with external protection circuitry if required.