Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
NM93C46LZEM8

NM93C46LZEM8

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile memory
  • Characteristics: Low-power, serial EEPROM
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Stores and retrieves data even when power is turned off
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Memory Size: 1K-bit (128 x 8)
  • Interface: Serial I2C (Inter-Integrated Circuit) bus
  • Operating Voltage: 1.8V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Time: 5ms (maximum)
  • Data Retention: 200 years (minimum)

Pin Configuration

The NM93C46LZEM8 has the following pin configuration:

```


| | | 1 8 | | | | 2 7 | | | | 3 6 | | | | 4 5 | |___________| ```

  1. Chip Select (CS): Used to enable/disable the device
  2. Serial Clock (SCK): Provides timing for data transfer
  3. Serial Data Input (SDI): Data input from the microcontroller
  4. Ground (GND): Reference ground
  5. Serial Data Output (SDO): Data output to the microcontroller
  6. Write Protect (WP): Protects against accidental writes
  7. VCC: Power supply voltage
  8. Not Connected (NC): No connection required

Functional Features

  • Low-power consumption for energy-efficient operation
  • Serial interface allows for easy integration with microcontrollers
  • Non-volatile memory retains data even when power is turned off
  • Write protection feature prevents accidental modification of stored data
  • Wide operating voltage range enables compatibility with various systems

Advantages and Disadvantages

Advantages: - Low-power consumption makes it suitable for battery-powered devices - Compact package size allows for space-efficient designs - Easy integration with microcontrollers simplifies system development - Data retention for up to 200 years ensures long-term reliability

Disadvantages: - Limited memory size may not be sufficient for certain applications - Serial interface may have slower data transfer rates compared to parallel interfaces - Write protection feature adds complexity to the system design

Working Principles

The NM93C46LZEM8 is a non-volatile memory device based on EEPROM (Electrically Erasable Programmable Read-Only Memory) technology. It utilizes a serial I2C bus interface for communication with a microcontroller. The device stores data in memory cells that can be electrically programmed and erased.

During operation, the microcontroller sends commands and data to the NM93C46LZEM8 through the serial interface. The device then stores the data in its memory cells. When the microcontroller needs to retrieve the data, it sends read commands to the device, which then transfers the requested data back to the microcontroller.

The write protect pin (WP) can be used to prevent accidental modification of the stored data. When the WP pin is enabled, any write commands sent by the microcontroller will be ignored by the device.

Detailed Application Field Plans

The NM93C46LZEM8 is commonly used in various electronic systems that require non-volatile memory storage. Some typical application fields include:

  1. Automotive: Used for storing vehicle configuration settings, mileage data, and other critical information.
  2. Consumer Electronics: Integrated into devices like smart TVs, set-top boxes, and audio systems for storing user preferences and settings.
  3. Industrial Control Systems: Employed in industrial automation equipment to store calibration data, configuration parameters, and system logs.
  4. Medical Devices: Utilized for storing patient data, device settings, and firmware updates in medical equipment.
  5. Smart Energy Meters: Incorporated into energy metering systems to store consumption data and billing information.

Detailed and Complete Alternative Models

  1. NM93C46LZEM8X: Similar to NM93C46LZEM8 but with extended operating temperature range (-40°C to +125°C).
  2. NM93C46LM8: 8-pin DIP (Dual Inline Package) version of the NM93C46LZEM8.
  3. NM93C46LEM8: Lead-free version of the NM93C46LZEM8, compliant with RoHS (Restriction of Hazardous Substances) regulations.

These alternative models offer similar functionality and compatibility with the NM93C46LZEM8, providing options for different application requirements.

*Word count:

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací NM93C46LZEM8 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of NM93C46LZEM8 in technical solutions:

  1. Q: What is NM93C46LZEM8? A: NM93C46LZEM8 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip that can store data electronically.

  2. Q: What is the storage capacity of NM93C46LZEM8? A: NM93C46LZEM8 has a storage capacity of 1 kilobit (128 bytes) organized in 64 pages of 16 bytes each.

  3. Q: How is NM93C46LZEM8 connected to a microcontroller or other devices? A: NM93C46LZEM8 uses a simple 3-wire serial interface (SI, SO, and SCK) to communicate with microcontrollers or other devices.

  4. Q: Can NM93C46LZEM8 be used for non-volatile storage in embedded systems? A: Yes, NM93C46LZEM8 is commonly used as non-volatile storage in various embedded systems, such as microcontrollers, IoT devices, and industrial applications.

  5. Q: Is NM93C46LZEM8 suitable for storing configuration settings or calibration data? A: Absolutely! NM93C46LZEM8 is often used to store configuration settings, calibration data, or other small amounts of non-volatile information.

  6. Q: Does NM93C46LZEM8 require any external power supply? A: Yes, NM93C46LZEM8 requires a power supply voltage (VCC) typically ranging from 2.5V to 5.5V.

  7. Q: Can NM93C46LZEM8 be easily integrated into existing PCB designs? A: Yes, NM93C46LZEM8 is available in an 8-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package, making it easy to integrate into existing PCB designs.

  8. Q: Is NM93C46LZEM8 capable of high-speed data transfers? A: No, NM93C46LZEM8 operates at a maximum clock frequency of 2 MHz, which makes it suitable for low to moderate speed applications.

  9. Q: Can NM93C46LZEM8 withstand harsh environmental conditions? A: NM93C46LZEM8 has a wide operating temperature range (-40°C to +85°C) and can withstand typical environmental conditions encountered in most electronic systems.

  10. Q: Are there any specific programming considerations for NM93C46LZEM8? A: Yes, NM93C46LZEM8 requires specific programming sequences and timing requirements, which are detailed in the datasheet provided by the manufacturer.