ON Semiconductor
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
NLV14025BDR2G

NLV14025BDR2G

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Level Translator
  • Characteristics: High-speed, low-power, bidirectional voltage translation
  • Package: SOIC-14
  • Essence: Translates logic voltage levels between different systems
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 1.65V to 5.5V
  • Logic Voltage Levels: 1.2V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 3.5ns (typical)
  • Output Drive Capability: ±24mA
  • Input Capacitance: 4pF (typical)

Detailed Pin Configuration

The NLV14025BDR2G has a total of 14 pins arranged as follows:

___________ | | VCC|1 14|GND A1 |2 13|B1 A2 |3 12|B2 OE |4 11|Y1 GND|5 10|Y2 A3 |6 9|B3 A4 |7 8|B4 |___________|

Functional Features

  • Bidirectional voltage level translation between different logic systems
  • Supports voltage translation from 1.2V to 5.5V
  • High-speed operation with low propagation delay
  • Low power consumption
  • Output drive capability suitable for driving various loads
  • Enable pin (OE) for disabling the outputs when not in use

Advantages and Disadvantages

Advantages

  • Wide supply voltage range allows compatibility with various systems
  • Bidirectional translation simplifies interfacing between different logic levels
  • High-speed operation enables efficient data transfer
  • Low power consumption helps in energy-efficient designs
  • Compact SOIC-14 package offers space-saving integration

Disadvantages

  • Limited to voltage translation within the specified range
  • May not be suitable for applications requiring higher drive capability

Working Principles

The NLV14025BDR2G is a voltage level translator designed to convert logic voltage levels between different systems. It utilizes a combination of MOSFETs and resistors to achieve bidirectional translation. The input signals are level-shifted to the desired output voltage levels, allowing seamless communication between devices operating at different logic voltages.

Detailed Application Field Plans

The NLV14025BDR2G finds applications in various fields where voltage level translation is required. Some potential application areas include:

  1. Microcontroller interfacing with different peripheral devices
  2. Communication interfaces between different logic families (e.g., TTL and CMOS)
  3. Sensor networks requiring voltage translation between sensor modules and control units
  4. Battery-powered devices with multiple voltage domains
  5. Industrial automation systems integrating components with varying logic voltage requirements

Detailed and Complete Alternative Models

  1. SN74LVC1T45DBVR - Single-Bit Dual-Supply Bus Transceiver
  2. TXS0108EPWR - 8-Bit Bidirectional Voltage-Level Translator
  3. PCA9306DCUR - Dual Bidirectional I2C-Bus and SMBus Voltage-Level Translator

These alternative models offer similar functionality and can be considered as alternatives to the NLV14025BDR2G based on specific application requirements.

Word count: 387 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací NLV14025BDR2G v technických řešeních

Sure! Here are 10 common questions and answers related to the application of NLV14025BDR2G in technical solutions:

  1. Q: What is NLV14025BDR2G? A: NLV14025BDR2G is a specific model number for a semiconductor device, typically used as a logic gate or buffer in electronic circuits.

  2. Q: What are the key features of NLV14025BDR2G? A: Some key features of NLV14025BDR2G include low power consumption, high-speed operation, wide operating voltage range, and compatibility with various logic families.

  3. Q: In which applications can NLV14025BDR2G be used? A: NLV14025BDR2G can be used in a wide range of applications such as data communication systems, industrial automation, consumer electronics, and automotive electronics.

  4. Q: What is the maximum operating frequency of NLV14025BDR2G? A: The maximum operating frequency of NLV14025BDR2G depends on the specific datasheet specifications, but it is typically in the range of several hundred megahertz to a few gigahertz.

  5. Q: Can NLV14025BDR2G operate at different supply voltages? A: Yes, NLV14025BDR2G is designed to operate at a wide range of supply voltages, typically from 1.65V to 5.5V.

  6. Q: Is NLV14025BDR2G compatible with other logic families? A: Yes, NLV14025BDR2G is compatible with various logic families such as TTL, CMOS, and LVCMOS.

  7. Q: What is the typical power consumption of NLV14025BDR2G? A: The power consumption of NLV14025BDR2G depends on the operating conditions, but it is generally low, making it suitable for battery-powered applications.

  8. Q: Can NLV14025BDR2G drive capacitive loads? A: Yes, NLV14025BDR2G can drive capacitive loads within its specified limits. However, it is recommended to refer to the datasheet for specific details.

  9. Q: Does NLV14025BDR2G have built-in protection features? A: NLV14025BDR2G may have built-in protection features such as overvoltage protection and electrostatic discharge (ESD) protection, depending on the manufacturer's design.

  10. Q: Where can I find more information about NLV14025BDR2G? A: You can find more detailed information about NLV14025BDR2G in the datasheet provided by the manufacturer or by contacting their technical support team.