ON Semiconductor
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
LM2575T-15G
Zobrazit detail DataSheets

LM2575T-15G

Product Overview

Category

The LM2575T-15G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 4.75V to 40V
  • Output Voltage: 15V
  • Output Current: Up to 1A
  • Efficiency: Up to 92%
  • Switching Frequency: 52 kHz
  • Operating Temperature Range: -40°C to +125°C

Package

The LM2575T-15G comes in a TO-220 package, which provides excellent thermal performance and high power dissipation capability.

Essence

The essence of LM2575T-15G lies in its ability to efficiently regulate voltage while maintaining a stable output.

Packaging/Quantity

The LM2575T-15G is typically packaged in reels or tubes, with quantities varying depending on the supplier.

Specifications

  • Input Voltage Range: 4.75V to 40V
  • Output Voltage: 15V
  • Output Current: Up to 1A
  • Dropout Voltage: 2V (maximum)
  • Line Regulation: ±0.5% (typical)
  • Load Regulation: ±0.5% (typical)
  • Ripple Rejection Ratio: 70dB (typical)
  • Shutdown Current: 50μA (maximum)

Pin Configuration

The LM2575T-15G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss during voltage regulation.
  • Built-in over-temperature protection safeguards the device from overheating.
  • Short-circuit protection prevents damage to the circuit in case of a fault.
  • Soft-start feature reduces inrush current during startup.

Advantages and Disadvantages

Advantages

  • Wide input voltage range enables compatibility with various power sources.
  • High efficiency results in reduced power dissipation and improved energy efficiency.
  • Over-temperature and short-circuit protection enhance reliability and safety.
  • Soft-start feature minimizes stress on components during startup.

Disadvantages

  • Limited output current capacity may restrict usage in high-power applications.
  • Dropout voltage of 2V may not be suitable for low-voltage systems.

Working Principles

The LM2575T-15G is a step-down switching regulator that utilizes pulse-width modulation (PWM) to regulate the output voltage. It operates by rapidly switching an internal power transistor on and off, controlling the average output voltage. This switching action allows for efficient voltage conversion while minimizing power loss.

Detailed Application Field Plans

The LM2575T-15G finds application in various fields, including:

  1. Power supply circuits for microcontrollers and other digital devices.
  2. Battery charging circuits for portable electronic devices.
  3. Automotive electronics, such as car audio systems and LED lighting.
  4. Industrial automation systems requiring stable and regulated power.

Detailed and Complete Alternative Models

Some alternative models to the LM2575T-15G include:

  1. LM2576T-15G: Similar specifications but with adjustable output voltage.
  2. LM2596T-15G: Higher output current capacity of up to 3A.
  3. LM317T: Linear voltage regulator with adjustable output voltage.

These alternatives provide flexibility and options based on specific requirements.

In conclusion, the LM2575T-15G is a versatile voltage regulator with a wide input voltage range, high efficiency, and various protective features. Its compact TO-220 package and reliable performance make it suitable for a range of applications in different industries.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LM2575T-15G v technických řešeních

Sure! Here are 10 common questions and answers related to the application of LM2575T-15G in technical solutions:

  1. Q: What is LM2575T-15G? A: LM2575T-15G is a voltage regulator IC that provides a fixed output voltage of 15V.

  2. Q: What is the input voltage range for LM2575T-15G? A: The input voltage range for LM2575T-15G is typically between 4.5V and 40V.

  3. Q: What is the maximum output current of LM2575T-15G? A: The maximum output current of LM2575T-15G is 1A.

  4. Q: How does LM2575T-15G regulate the output voltage? A: LM2575T-15G uses a feedback mechanism to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the duty cycle of the internal switch accordingly.

  5. Q: Can LM2575T-15G be used as a step-up (boost) converter? A: No, LM2575T-15G is a step-down (buck) converter and can only provide a lower output voltage than the input voltage.

  6. Q: What is the efficiency of LM2575T-15G? A: The efficiency of LM2575T-15G depends on the input and output voltage levels, as well as the load current. Generally, it can achieve efficiencies up to 90%.

  7. Q: Does LM2575T-15G require external components for operation? A: Yes, LM2575T-15G requires external components such as an inductor, capacitors, and resistors for proper operation.

  8. Q: Can LM2575T-15G handle high input voltage transients? A: Yes, LM2575T-15G has built-in protection features to handle high input voltage transients and protect the IC from damage.

  9. Q: Is LM2575T-15G suitable for battery-powered applications? A: Yes, LM2575T-15G is commonly used in battery-powered applications due to its low dropout voltage and efficient operation.

  10. Q: Are there any specific layout considerations for using LM2575T-15G? A: Yes, it is important to follow the recommended layout guidelines provided in the datasheet to minimize noise, ensure stable operation, and maximize efficiency.

Please note that these answers are general and may vary depending on the specific application and circuit design. It is always recommended to refer to the LM2575T-15G datasheet and consult with an experienced engineer for accurate and detailed information.