Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
CAT24C01WI-G

CAT24C01WI-G

Product Overview

Category

The CAT24C01WI-G belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The CAT24C01WI-G retains stored data even when power is removed.
  • Electrically erasable: Data can be erased and reprogrammed electronically.
  • Low power consumption: Consumes minimal power during read and write operations.
  • High reliability: Offers robust performance and long-term data retention.
  • Small form factor: Comes in a compact package suitable for space-constrained applications.

Package

The CAT24C01WI-G is available in an 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of the CAT24C01WI-G lies in its ability to provide reliable and non-volatile data storage in electronic devices.

Packaging/Quantity

This chip is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Memory capacity: 1 kilobit (128 bytes)
  • Supply voltage: 1.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Write endurance: 1 million cycles
  • Data retention: 100 years

Detailed Pin Configuration

The CAT24C01WI-G features the following pin configuration:

  1. A0: Address input pin
  2. A1: Address input pin
  3. A2: Address input pin
  4. GND: Ground connection
  5. SDA: Serial data input/output
  6. SCL: Serial clock input
  7. WP: Write protect pin
  8. VCC: Supply voltage

Functional Features

  • Random access: Allows reading and writing of data at any memory location.
  • Byte-wise operations: Supports individual byte read and write operations.
  • Sequential read: Enables continuous reading of multiple bytes without readdressing.
  • Write protection: Provides a write protect pin to prevent accidental data modification.
  • Hardware write control: Ensures data integrity by requiring specific voltage levels for write operations.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Data remains intact even during power loss.
  • High reliability: Offers long-term data retention and endurance.
  • Compact form factor: Suitable for space-constrained designs.
  • Low power consumption: Minimizes energy usage in battery-powered devices.

Disadvantages

  • Limited storage capacity: 1 kilobit may not be sufficient for certain applications.
  • Slower write speed compared to other memory technologies.
  • Relatively higher cost per bit compared to larger capacity EEPROMs.

Working Principles

The CAT24C01WI-G utilizes a combination of electrically erasable floating-gate transistors and semiconductor memory cells. When data is written, an electrical charge is stored in the floating gate, altering the transistor's behavior. This charge can be removed or modified electronically, allowing for data erasure and reprogramming.

Detailed Application Field Plans

The CAT24C01WI-G finds application in various fields, including but not limited to:

  1. Microcontrollers: Used for storing configuration settings, calibration data, and firmware updates.
  2. Computers: Employed in BIOS chips, expansion cards, and embedded systems for non-volatile storage.
  3. Consumer electronics: Integrated into devices like smart TVs, set-top boxes, and IoT devices for data storage and firmware updates.
  4. Automotive: Utilized in electronic control units (ECUs) for storing critical vehicle parameters and sensor calibration data.
  5. Industrial automation: Used in programmable logic controllers (PLCs) and industrial control systems for data storage and configuration.

Detailed and Complete Alternative Models

  1. CAT24C02WI-G: Similar to the CAT24C01WI-G, but with double the memory capacity (2 kilobits).
  2. CAT24C04WI-G: Offers four times the memory capacity of the CAT24C01WI-G (4 kilobits).
  3. CAT24C08WI-G: Provides eight times the memory capacity of the CAT24C01WI-G (8 kilobits).
  4. CAT24C16WI-G: Features sixteen times the memory capacity of the CAT24C01WI-G (16 kilobits).

These alternative models offer increased storage capacity while maintaining similar characteristics and functionality to the CAT24C01WI-G.

In conclusion, the CAT24C01WI-G is a reliable and compact EEPROM chip that provides non-volatile data storage for various electronic devices. Its high reliability, low power consumption, and small form factor make it suitable for a wide range of applications. However, its limited storage capacity and slower write speed

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací CAT24C01WI-G v technických řešeních

Sure! Here are 10 common questions and answers related to the application of CAT24C01WI-G in technical solutions:

  1. Q: What is CAT24C01WI-G? A: CAT24C01WI-G is a 1K-bit I2C Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by ON Semiconductor.

  2. Q: What is the operating voltage range for CAT24C01WI-G? A: The operating voltage range for CAT24C01WI-G is typically between 1.7V and 5.5V.

  3. Q: How much memory does CAT24C01WI-G have? A: CAT24C01WI-G has a total memory capacity of 1 kilobit, which is equivalent to 128 bytes.

  4. Q: What is the maximum clock frequency supported by CAT24C01WI-G? A: CAT24C01WI-G supports a maximum clock frequency of 400 kHz.

  5. Q: Can CAT24C01WI-G be used for both read and write operations? A: Yes, CAT24C01WI-G supports both read and write operations, allowing data to be stored and retrieved from the EEPROM.

  6. Q: Is CAT24C01WI-G suitable for low-power applications? A: Yes, CAT24C01WI-G is designed for low-power consumption, making it suitable for battery-powered or energy-efficient devices.

  7. Q: Does CAT24C01WI-G have any built-in security features? A: No, CAT24C01WI-G does not have built-in security features such as hardware write protection or password protection.

  8. Q: Can multiple CAT24C01WI-G devices be connected together on the same I2C bus? A: Yes, multiple CAT24C01WI-G devices can be connected together on the same I2C bus by assigning unique addresses to each device.

  9. Q: What is the typical endurance of CAT24C01WI-G? A: CAT24C01WI-G has a typical endurance of 1 million write cycles, meaning it can be written and erased up to 1 million times before failure.

  10. Q: Can CAT24C01WI-G operate in extreme temperature conditions? A: Yes, CAT24C01WI-G has an extended temperature range of -40°C to +85°C, allowing it to function reliably in harsh environments.

Please note that these answers are general and may vary depending on the specific application or use case.