ON Semiconductor
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
74ABT245CMSA
Zobrazit detail DataSheets

Encyclopedia Entry: 74ABT245CMSA

Product Overview

Category

The 74ABT245CMSA belongs to the category of integrated circuits (ICs) and specifically falls under the family of bus transceivers.

Use

This IC is primarily used for bidirectional data transfer between different buses or systems. It enables seamless communication by converting signals from one bus protocol to another.

Characteristics

  • Bidirectional data transfer capability
  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Robust design for noise immunity

Package

The 74ABT245CMSA is available in a small outline integrated circuit (SOIC) package. This package offers compactness, ease of handling, and efficient heat dissipation.

Essence

The essence of the 74ABT245CMSA lies in its ability to facilitate reliable and efficient data transfer between different bus systems, ensuring compatibility and smooth communication.

Packaging/Quantity

The IC is typically packaged in reels or tubes, with each reel containing a specific quantity of units. The exact packaging and quantity may vary depending on the manufacturer and supplier.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Compatibility: TTL, CMOS
  • Maximum Data Transfer Rate: X Mbps
  • Number of Pins: 20
  • Pin Pitch: 0.65mm

Detailed Pin Configuration

  1. A1: Bus A Input/Output
  2. A2: Bus A Input/Output
  3. A3: Bus A Input/Output
  4. A4: Bus A Input/Output
  5. A5: Bus A Input/Output
  6. GND: Ground
  7. B1: Bus B Input/Output
  8. B2: Bus B Input/Output
  9. B3: Bus B Input/Output
  10. B4: Bus B Input/Output
  11. B5: Bus B Input/Output
  12. OE: Output Enable
  13. DIR: Direction Control
  14. VCC: Supply Voltage
  15. B6: Bus B Input/Output
  16. B7: Bus B Input/Output
  17. B8: Bus B Input/Output
  18. B9: Bus B Input/Output
  19. B10: Bus B Input/Output
  20. GND: Ground

Functional Features

  • Bidirectional data transfer between Bus A and Bus B
  • Output enable control for enabling/disabling the data transfer
  • Direction control for selecting the direction of data flow
  • High-speed operation allows for efficient data transmission
  • TTL and CMOS compatible inputs/outputs ensure compatibility with various systems
  • Robust design provides noise immunity, ensuring reliable data transfer

Advantages and Disadvantages

Advantages

  • Enables seamless communication between different bus systems
  • High-speed operation facilitates fast data transfer
  • Low power consumption helps in energy-efficient designs
  • Wide operating voltage range ensures compatibility with various power supplies
  • Robust design enhances reliability in noisy environments

Disadvantages

  • Limited number of input/output pins may restrict complex system integration
  • Requires careful consideration of direction control to avoid data conflicts

Working Principles

The 74ABT245CMSA operates based on the principles of bidirectional data transfer. It uses internal circuitry to convert signals from Bus A to Bus B or vice versa, depending on the direction control input. The output enable control allows the user to enable or disable the data transfer. The IC's high-speed operation ensures efficient and timely data transmission.

Detailed Application Field Plans

The 74ABT245CMSA finds applications in various fields where bidirectional data transfer between different bus systems is required. Some of the common application areas include:

  1. Computer Peripherals: Facilitating communication between different peripherals such as printers, scanners, and external storage devices.
  2. Industrial Automation: Enabling data exchange between control systems, sensors, and actuators in industrial automation setups.
  3. Automotive Electronics: Supporting data transfer between different automotive modules, such as engine control units, infotainment systems, and body control modules.
  4. Communication Systems: Facilitating data exchange between different communication protocols, such as UART, SPI, and I2C.

Detailed and Complete Alternative Models

  1. 74HC245: Similar bidirectional bus transceiver IC with TTL-compatible inputs/outputs.
  2. SN74LVC245A: Bidirectional bus transceiver IC with low voltage compatibility and enhanced noise immunity.
  3. CD74HCT245: High-speed CMOS bus transceiver IC with TTL-compatible inputs/outputs.

These alternative models offer similar functionality to the 74ABT245CMSA and can be considered based on specific requirements and system constraints.

*Word count:

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 74ABT245CMSA v technických řešeních

Sure! Here are 10 common questions and answers related to the application of 74ABT245CMSA in technical solutions:

  1. Q: What is the 74ABT245CMSA? A: The 74ABT245CMSA is a bidirectional octal bus transceiver integrated circuit (IC) that can be used to enable bidirectional transfer of data between two buses.

  2. Q: What is the maximum operating voltage for the 74ABT245CMSA? A: The maximum operating voltage for the 74ABT245CMSA is typically 5.5 volts.

  3. Q: Can the 74ABT245CMSA handle both TTL and CMOS logic levels? A: Yes, the 74ABT245CMSA is designed to be compatible with both TTL and CMOS logic levels.

  4. Q: How many data lines can the 74ABT245CMSA handle? A: The 74ABT245CMSA can handle 8 bidirectional data lines.

  5. Q: What is the purpose of the direction control pin (DIR) on the 74ABT245CMSA? A: The DIR pin is used to control the direction of data flow between the two buses connected to the IC.

  6. Q: Can the 74ABT245CMSA be used in applications where level shifting is required? A: Yes, the 74ABT245CMSA can be used for level shifting as it supports both TTL and CMOS logic levels.

  7. Q: What is the maximum data transfer rate supported by the 74ABT245CMSA? A: The 74ABT245CMSA can support data transfer rates up to 200 MHz.

  8. Q: Does the 74ABT245CMSA have any built-in protection features? A: Yes, the 74ABT245CMSA has built-in ESD (electrostatic discharge) protection on all inputs and outputs.

  9. Q: Can the 74ABT245CMSA be used in both parallel and serial communication applications? A: Yes, the 74ABT245CMSA can be used in both parallel and serial communication applications, depending on the configuration and connection.

  10. Q: Are there any specific precautions to consider when using the 74ABT245CMSA? A: It is important to ensure proper power supply decoupling and avoid exceeding the maximum operating voltage or current ratings specified in the datasheet. Additionally, proper signal integrity practices should be followed to minimize noise and interference.