ON Semiconductor
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
1N5929BRL
Zobrazit detail DataSheets

1N5929BRL

Product Overview

The 1N5929BRL is a Zener diode belonging to the semiconductor category. It is commonly used for voltage regulation and transient suppression in electronic circuits. This diode exhibits characteristics such as stable voltage output, low impedance, and high reliability. The package type for the 1N5929BRL is DO-41, and it is available in various packaging quantities.

Specifications

  • Voltage: 6.2V
  • Power Dissipation: 1.5W
  • Zener Voltage Tolerance: ±5%
  • Operating Temperature Range: -65°C to +200°C

Pin Configuration

The 1N5929BRL Zener diode has a simple two-pin configuration, with the anode connected to the positive terminal and the cathode connected to the negative terminal.

Functional Features

The primary function of the 1N5929BRL is to maintain a constant voltage across its terminals, providing stability and protection to the circuit it is integrated into. It achieves this by allowing current to flow in reverse when the voltage reaches the diode's breakdown voltage.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low impedance
  • High reliability

Disadvantages

  • Limited power dissipation capability
  • Vulnerable to thermal runaway if not properly heat-sinked

Working Principles

When the voltage across the 1N5929BRL exceeds its specified breakdown voltage, it begins to conduct in the reverse direction, effectively clamping the voltage to its rated value. This characteristic makes it suitable for voltage regulation and transient suppression applications.

Application Field Plans

The 1N5929BRL finds extensive use in various electronic circuits, including: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits - Surge suppressors

Alternative Models

Some alternative models to the 1N5929BRL include: - 1N4734A - BZX55C6V2 - 1N5388B

In conclusion, the 1N5929BRL Zener diode is a reliable component that provides stable voltage regulation and transient suppression in electronic circuits. Its precise characteristics make it suitable for a wide range of applications, although care must be taken to ensure proper heat dissipation to avoid thermal issues.

[Word Count: 306]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 1N5929BRL v technických řešeních

  1. What is the 1N5929BRL diode used for?

    • The 1N5929BRL is a Zener diode commonly used for voltage regulation and protection in electronic circuits.

  2. What is the maximum power dissipation of the 1N5929BRL?

    • The maximum power dissipation of the 1N5929BRL is 1.5 watts.

  3. What is the voltage rating of the 1N5929BRL?

    • The 1N5929BRL has a nominal Zener voltage of 6.2 volts.

  4. What are some typical applications of the 1N5929BRL?

    • Typical applications include voltage regulation, overvoltage protection, and voltage reference circuits.

  5. What is the temperature coefficient of the 1N5929BRL?

    • The temperature coefficient of the 1N5929BRL is typically around -2 mV/°C.

  6. What is the maximum forward voltage of the 1N5929BRL?

    • The maximum forward voltage of the 1N5929BRL is 1.5 volts at 200 mA.

  7. What is the reverse leakage current of the 1N5929BRL?

    • The reverse leakage current is typically less than 5 µA at the Zener voltage.

  8. Can the 1N5929BRL be used for precision voltage references?

    • Yes, the 1N5929BRL can be used as a relatively stable voltage reference in many applications.

  9. What is the package type of the 1N5929BRL?

    • The 1N5929BRL is available in a DO-41 axial leaded package.

  10. What are some important considerations when using the 1N5929BRL in a circuit?

    • It's important to consider the power dissipation, voltage derating with temperature, and the current flowing through the diode to ensure proper performance and reliability.