S9KEAZN16ACLC

Product Overview

Use

This microcontroller is designed for various embedded applications, including consumer electronics, industrial automation, and automotive systems.

Characteristics

Low power consumption
High performance
Integrated peripherals
Small form factor

Package

The S9KEAZN16ACLC comes in a compact LQFP package, which ensures easy integration into different electronic devices.

Essence

The essence of this microcontroller lies in its ability to provide efficient processing power while consuming minimal energy.

Packaging/Quantity

The S9KEAZN16ACLC is typically packaged in reels or trays, with quantities varying based on customer requirements.

Specifications

Architecture: ARM Cortex-M0+
CPU Speed: Up to 48 MHz
Flash Memory: 16 KB
RAM: 2 KB
Operating Voltage: 1.8V - 3.6V
Operating Temperature Range: -40°C to +85°C
Number of Pins: 32
Communication Interfaces: UART, SPI, I2C
Analog-to-Digital Converter (ADC): 12-bit, 8 channels
Timers: 16-bit, 4 channels

Detailed Pin Configuration

The S9KEAZN16ACLC has a total of 32 pins, each serving a specific purpose. The pin configuration is as follows:

Pin 1: VDD (Power Supply)
Pin 2: RESET (Reset Input)
Pin 3: PTA0 (General Purpose I/O)
Pin 4: PTA1 (General Purpose I/O)
Pin 5: PTA2 (General Purpose I/O)
Pin 6: PTA3 (General Purpose I/O)
Pin 7: PTA4 (General Purpose I/O)
Pin 8: PTA5 (General Purpose I/O)
Pin 9: PTA6 (General Purpose I/O)
Pin 10: PTA7 (General Purpose I/O)
Pin 11: PTB0 (General Purpose I/O)
Pin 12: PTB1 (General Purpose I/O)
Pin 13: PTB2 (General Purpose I/O)
Pin 14: PTB3 (General Purpose I/O)
Pin 15: PTB4 (General Purpose I/O)
Pin 16: PTB5 (General Purpose I/O)
Pin 17: PTB6 (General Purpose I/O)
Pin 18: PTB7 (General Purpose I/O)
Pin 19: VSS (Ground)
Pin 20: VDD (Power Supply)
Pin 21: ADC0_DP0 (Analog Input)
Pin 22: ADC0_DM0 (Analog Input)
Pin 23: ADC0_DP1 (Analog Input)
Pin 24: ADC0_DM1 (Analog Input)
Pin 25: ADC0_DP2 (Analog Input)
Pin 26: ADC0_DM2 (Analog Input)
Pin 27: ADC0_DP3 (Analog Input)
Pin 28: ADC0_DM3 (Analog Input)
Pin 29: VREFH (Reference Voltage)
Pin 30: VREFL (Reference Voltage)
Pin 31: RESETB (Reset Output)
Pin 32: VSS (Ground)

Functional Features

The S9KEAZN16ACLC microcontroller offers several functional features, including:

High-speed processing capabilities
Low power consumption for extended battery life
Integrated communication interfaces for seamless connectivity
Analog-to-Digital Converter (ADC) for precise analog signal measurements
Timers for accurate timing and event control

Advantages and Disadvantages

Advantages

Efficient power management
Compact size for space-constrained applications
Versatile communication interfaces
Cost-effective solution for embedded systems

Disadvantages

Limited flash memory and RAM capacity
Relatively fewer pins compared to higher-end microcontrollers
Restricted operating temperature range

Working Principles

The S9KEAZN16ACLC operates on the ARM Cortex-M0+ architecture, which provides a balance between performance and power efficiency. It executes instructions stored in its flash memory and interacts with external devices through various communication interfaces. The microcontroller's integrated peripherals enable it to perform specific tasks, such as analog signal conversion and precise timing.

Detailed Application Field Plans

The S9KEAZN16ACLC is suitable for a wide range of applications, including:

Consumer Electronics:
- Smart home devices
- Wearable technology
- Remote controls
Industrial Automation

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S9KEAZN16ACLC v technických řešeních

Sure! Here are 10 common questions and answers related to the application of S9KEAZN16ACLC in technical solutions:

Q: What is the S9KEAZN16ACLC microcontroller used for? A: The S9KEAZN16ACLC microcontroller is commonly used in various technical solutions, including industrial automation, consumer electronics, and automotive applications.
Q: What is the maximum clock frequency supported by the S9KEAZN16ACLC? A: The S9KEAZN16ACLC microcontroller supports a maximum clock frequency of 48 MHz.
Q: How much flash memory does the S9KEAZN16ACLC have? A: The S9KEAZN16ACLC microcontroller has 16 KB of flash memory.
Q: Can I expand the memory of the S9KEAZN16ACLC? A: No, the S9KEAZN16ACLC does not support external memory expansion. However, it does have 2 KB of RAM for data storage.
Q: What communication interfaces are available on the S9KEAZN16ACLC? A: The S9KEAZN16ACLC microcontroller features UART, SPI, and I2C communication interfaces for connecting with other devices.
Q: Does the S9KEAZN16ACLC support analog-to-digital conversion (ADC)? A: Yes, the S9KEAZN16ACLC has a 12-bit ADC module that can be used for analog signal measurement.
Q: Can I use the S9KEAZN16ACLC for motor control applications? A: Yes, the S9KEAZN16ACLC supports pulse-width modulation (PWM) outputs, making it suitable for motor control applications.
Q: What development tools are available for programming the S9KEAZN16ACLC? A: The S9KEAZN16ACLC can be programmed using various integrated development environments (IDEs) such as CodeWarrior and MCUXpresso.
Q: Is the S9KEAZN16ACLC compatible with other microcontrollers in the KEA series? A: Yes, the S9KEAZN16ACLC is part of the KEA series and is generally compatible with other microcontrollers in the same series.
Q: Where can I find documentation and resources for the S9KEAZN16ACLC? A: You can find documentation, datasheets, application notes, and other resources for the S9KEAZN16ACLC on the manufacturer's website or community forums dedicated to microcontroller development.