NXP USA Inc.
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MPXV6115VC6T1
Zobrazit detail DataSheets

MPXV6115VC6T1

Introduction

The MPXV6115VC6T1 is a pressure sensor belonging to the category of integrated pressure sensors. It is commonly used in various applications that require accurate measurement of pressure, such as automotive and industrial systems. This sensor possesses unique characteristics, comes in a specific package, and offers distinct advantages and disadvantages.

Basic Information Overview

  • Category: Integrated Pressure Sensor
  • Use: Measurement of pressure in automotive and industrial systems
  • Characteristics: High accuracy, small form factor, low power consumption
  • Package: Surface mount
  • Essence: Accurate pressure measurement
  • Packaging/Quantity: Tape and reel packaging, quantity varies based on supplier

Specifications

  • Pressure Range: 0 to 115 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature Range: -40°C to 125°C
  • Accuracy: ±1.5% Full Scale Span (typical)

Detailed Pin Configuration

The MPXV6115VC6T1 features a total of 6 pins: 1. Vout - Analog output 2. Vss - Ground 3. VDD - Supply voltage 4. N/C - No connection 5. N/C - No connection 6. N/C - No connection

Functional Features

  • Accurate pressure sensing
  • Small form factor
  • Low power consumption
  • Robust design for harsh environments

Advantages and Disadvantages

Advantages

  • High accuracy
  • Compact size
  • Suitable for harsh environments
  • Low power consumption

Disadvantages

  • Limited pressure range
  • Analog output requires additional signal conditioning

Working Principles

The MPXV6115VC6T1 operates on the principle of piezoresistive sensing. When pressure is applied, the internal resistors change their value, resulting in a corresponding change in the output voltage. This voltage is proportional to the applied pressure and can be calibrated to provide an accurate pressure reading.

Detailed Application Field Plans

The MPXV6115VC6T1 is widely used in the following applications: - Automotive: Tire pressure monitoring systems, engine control systems - Industrial: HVAC systems, pneumatic control systems

Detailed and Complete Alternative Models

Some alternative models to the MPXV6115VC6T1 include: - MPXV5010GC6U: Similar pressure range with different package - MPX5700AP: Higher pressure range with digital output - MPX2050DP: Lower pressure range with analog output

In conclusion, the MPXV6115VC6T1 is a versatile pressure sensor suitable for various applications requiring accurate pressure measurement. Its compact size, high accuracy, and robust design make it a popular choice in the automotive and industrial sectors.

[Word Count: 443]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MPXV6115VC6T1 v technických řešeních

  1. What is the MPXV6115VC6T1 pressure sensor used for?

    • The MPXV6115VC6T1 pressure sensor is commonly used to measure absolute pressure in a variety of applications, such as automotive systems, industrial controls, and medical devices.

  2. What is the operating voltage range of the MPXV6115VC6T1?

    • The operating voltage range of the MPXV6115VC6T1 is typically 4.75V to 5.25V, making it suitable for use with standard power supplies.

  3. How does the MPXV6115VC6T1 communicate with microcontrollers or other devices?

    • The MPXV6115VC6T1 features an analog output that can be interfaced with microcontrollers or ADCs for digital processing and data acquisition.

  4. What is the pressure range that the MPXV6115VC6T1 can measure?

    • The MPXV6115VC6T1 can measure pressure within a range of 0 to 115 kPa (0 to 16.7 psi), making it suitable for a wide range of pressure sensing applications.

  5. Can the MPXV6115VC6T1 be used in harsh environments?

    • Yes, the MPXV6115VC6T1 is designed to operate in harsh environments and can withstand conditions such as temperature variations and mechanical stress.

  6. What is the accuracy of the MPXV6115VC6T1 sensor?

    • The MPXV6115VC6T1 has a typical accuracy of ±1.5% over the specified temperature range, providing reliable and precise pressure measurements.

  7. Is the MPXV6115VC6T1 sensor suitable for low-power applications?

    • Yes, the MPXV6115VC6T1 has low power consumption, making it suitable for battery-powered or energy-efficient applications.

  8. Can the MPXV6115VC6T1 be used for altitude measurement?

    • Yes, the MPXV6115VC6T1 can be used for altitude measurement by converting the absolute pressure readings to altitude using appropriate algorithms.

  9. What are the typical applications of the MPXV6115VC6T1 in automotive systems?

    • In automotive systems, the MPXV6115VC6T1 can be used for applications such as tire pressure monitoring, engine control, and climate control systems.

  10. Does the MPXV6115VC6T1 require calibration before use?

    • The MPXV6115VC6T1 may require initial calibration to ensure accurate pressure measurements, especially in critical applications. However, it typically comes pre-calibrated from the manufacturer for general use.