NXP USA Inc.
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MKE18F256VLL16
Zobrazit detail DataSheets

MKE18F256VLL16

Introduction

The MKE18F256VLL16 is a microcontroller belonging to the Kinetis E series, designed and manufactured by NXP Semiconductors. This microcontroller offers a wide range of features and capabilities suitable for various applications.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, industrial control systems
  • Characteristics: Low power consumption, high performance, integrated peripherals
  • Package: LQFP
  • Essence: ARM Cortex-M4 core
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Core: ARM Cortex-M4
  • Clock Speed: Up to 120 MHz
  • Flash Memory: 256 KB
  • RAM: 64 KB
  • Operating Voltage: 1.71V to 3.6V
  • Temperature Range: -40°C to 105°C
  • Interfaces: SPI, I2C, UART, USB
  • Analog-to-Digital Converter (ADC): 16-bit, 16 channels

Detailed Pin Configuration

The MKE18F256VLL16 microcontroller has a total of 100 pins, including GPIO, analog input, and communication interface pins. The pinout configuration is crucial for interfacing with external components and peripherals.

Functional Features

  • Low Power Modes: Offers multiple low-power modes for energy-efficient operation.
  • Integrated Peripherals: Includes ADC, DAC, PWM, and various communication interfaces.
  • Security Features: Built-in security features for data protection and secure boot.
  • Flexible Clocking Options: Supports various clock sources and configurations.

Advantages and Disadvantages

Advantages

  • High-performance ARM Cortex-M4 core
  • Rich set of integrated peripherals
  • Wide operating voltage range
  • Enhanced security features

Disadvantages

  • Limited onboard memory for certain applications
  • Higher cost compared to some competing microcontrollers

Working Principles

The MKE18F256VLL16 operates based on the ARM Cortex-M4 core, which provides high computational performance and efficient handling of complex tasks. The integrated peripherals and flexible clocking options enable seamless interaction with external components and efficient utilization of resources.

Detailed Application Field Plans

Industrial Control Systems

The microcontroller can be used in industrial control systems for real-time monitoring, process control, and automation applications. Its high performance and integrated peripherals make it suitable for demanding industrial environments.

IoT Devices

In IoT devices, the MKE18F256VLL16 can be utilized for sensor data processing, connectivity, and control functions. Its low power modes and security features are beneficial for IoT applications.

Automotive Electronics

With its wide temperature range and robust design, the microcontroller can be employed in automotive electronics for applications such as engine control, dashboard displays, and vehicle connectivity.

Detailed and Complete Alternative Models

  • MKE14Z128VLL16: A lower-cost alternative with similar peripherals and features but reduced memory and performance.
  • STM32F407VGT6: An alternative from STMicroelectronics with comparable performance and a different set of integrated peripherals.

In conclusion, the MKE18F256VLL16 microcontroller offers a balance of performance, features, and flexibility, making it suitable for a wide range of embedded system applications.

Word Count: 515

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MKE18F256VLL16 v technických řešeních

  1. What is the MKE18F256VLL16 microcontroller used for?

    • The MKE18F256VLL16 microcontroller is commonly used in a wide range of technical solutions, including industrial control systems, consumer electronics, automotive applications, and more.

  2. What are the key features of the MKE18F256VLL16?

    • The MKE18F256VLL16 features an Arm Cortex-M4 core, 256KB flash memory, 64KB RAM, multiple communication interfaces, analog and digital peripherals, and low-power operation.

  3. How can I program the MKE18F256VLL16 microcontroller?

    • The MKE18F256VLL16 can be programmed using various integrated development environments (IDEs) such as MCUXpresso, Keil, or IAR Systems, with support for C/C++ programming languages.

  4. What communication interfaces does the MKE18F256VLL16 support?

    • The MKE18F256VLL16 supports interfaces such as SPI, I2C, UART, CAN, Ethernet, USB, and more, making it suitable for diverse connectivity requirements.

  5. Is the MKE18F256VLL16 suitable for real-time applications?

    • Yes, the MKE18F256VLL16's Arm Cortex-M4 core and peripherals make it well-suited for real-time applications requiring precise timing and responsiveness.

  6. Can the MKE18F256VLL16 operate in harsh environmental conditions?

    • With its robust design and wide operating temperature range, the MKE18F256VLL16 is suitable for use in harsh environmental conditions, including automotive and industrial settings.

  7. What tools and resources are available for developing with the MKE18F256VLL16?

    • NXP provides comprehensive development tools, software libraries, application notes, and reference designs to aid developers in utilizing the MKE18F256VLL16 effectively.

  8. Does the MKE18F256VLL16 support low-power operation?

    • Yes, the MKE18F256VLL16 offers low-power modes and features to optimize energy efficiency, making it suitable for battery-powered and energy-conscious applications.

  9. Are there any security features in the MKE18F256VLL16?

    • The MKE18F256VLL16 includes hardware security modules, secure boot, and cryptographic accelerators to address security requirements in embedded systems.

  10. Where can I find detailed technical documentation for the MKE18F256VLL16?

    • Detailed technical documentation, including datasheets, reference manuals, and application notes, can be found on NXP's official website and through their distribution channels.