NXP USA Inc.
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MC68HC908QY2CPE
Zobrazit detail DataSheets

MC68HC908QY2CPE

Product Overview

Category

The MC68HC908QY2CPE belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.

Characteristics

  • High-performance 8-bit microcontroller
  • Low power consumption
  • Integrated peripherals for enhanced functionality
  • Wide operating voltage range
  • Small form factor

Package

The MC68HC908QY2CPE is available in a compact plastic package, which ensures easy integration into electronic circuits.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact and low-power package.

Packaging/Quantity

The MC68HC908QY2CPE is typically packaged in reels or tubes, with each containing a specific quantity of microcontrollers. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 8 MHz
  • Program Memory Size: 4 KB
  • RAM Size: 256 bytes
  • Operating Voltage Range: 2.7V to 5.5V
  • Number of I/O Pins: 20
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 2 x 8-bit, 1 x 16-bit
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The MC68HC908QY2CPE has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. PTA0 - General-purpose I/O pin
  3. PTA1 - General-purpose I/O pin
  4. PTA2 - General-purpose I/O pin
  5. PTA3 - General-purpose I/O pin
  6. PTA4 - General-purpose I/O pin
  7. PTA5 - General-purpose I/O pin
  8. PTA6 - General-purpose I/O pin
  9. PTA7 - General-purpose I/O pin
  10. RESET - Reset pin
  11. PTB0 - General-purpose I/O pin
  12. PTB1 - General-purpose I/O pin
  13. PTB2 - General-purpose I/O pin
  14. PTB3 - General-purpose I/O pin
  15. PTB4 - General-purpose I/O pin
  16. PTB5 - General-purpose I/O pin
  17. PTB6 - General-purpose I/O pin
  18. PTB7 - General-purpose I/O pin
  19. VSS - Ground
  20. VDD - Power supply voltage

Functional Features

The MC68HC908QY2CPE offers several functional features that enhance its usability and performance:

  • Integrated UART, SPI, and I2C communication interfaces for seamless connectivity with other devices.
  • Two 8-bit timers/counters and one 16-bit timer/counter for precise timing and event management.
  • Eight-channel, 10-bit resolution ADC for analog signal acquisition.
  • Flexible power management options to optimize power consumption.
  • Enhanced security features to protect sensitive data.

Advantages and Disadvantages

Advantages

  • High-performance capabilities in a compact form factor.
  • Low power consumption, making it suitable for battery-powered applications.
  • Integrated peripherals reduce the need for external components.
  • Wide operating voltage range allows for compatibility with various power sources.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • Limited RAM size may impose constraints on data storage and manipulation.
  • Availability and support may vary depending on the manufacturer.

Working Principles

The MC68HC908QY2CPE operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with external devices through its I/O pins and communication interfaces, and performs various tasks according to the programmed logic.

Detailed Application Field Plans

The MC68HC908QY2CPE finds applications in a wide range of fields, including but not limited to:

  1. Home automation systems
  2. Industrial control systems
  3. Automotive electronics
  4. Medical devices
  5. Consumer electronics

In these fields, the microcontroller can be utilized for tasks such as sensor data acquisition, motor control, user interface management, and data processing.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MC68HC908QY2CPE include:

  1. ATmega328P - Microcontroller from Atmel (now Microchip) with 8-bit architecture and similar peripherals.
  2. PIC16F877A - Microcontroller from Microchip with 8-bit architecture and enhanced features.
  3. STM32F103C8T6 - Microcontroller

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MC68HC908QY2CPE v technických řešeních

Sure! Here are 10 common questions and answers related to the application of MC68HC908QY2CPE in technical solutions:

  1. Question: What is MC68HC908QY2CPE?
    Answer: MC68HC908QY2CPE is a microcontroller unit (MCU) from the HC08 family, designed for embedded systems applications.

  2. Question: What are the key features of MC68HC908QY2CPE?
    Answer: Some key features include an 8-bit CPU core, flash memory, EEPROM, multiple I/O ports, timers, and analog-to-digital converters.

  3. Question: What are the typical applications of MC68HC908QY2CPE?
    Answer: MC68HC908QY2CPE is commonly used in automotive electronics, industrial control systems, home automation, and consumer electronics.

  4. Question: How much flash memory does MC68HC908QY2CPE have?
    Answer: MC68HC908QY2CPE has 8KB of flash memory, which can be used for storing program code and data.

  5. Question: Can I expand the memory of MC68HC908QY2CPE?
    Answer: No, the memory of MC68HC908QY2CPE is fixed and cannot be expanded externally.

  6. Question: Does MC68HC908QY2CPE support analog inputs?
    Answer: Yes, MC68HC908QY2CPE has built-in analog-to-digital converters (ADCs) that allow it to read analog signals.

  7. Question: What communication interfaces are supported by MC68HC908QY2CPE?
    Answer: MC68HC908QY2CPE supports serial communication interfaces such as UART (Universal Asynchronous Receiver-Transmitter) and SPI (Serial Peripheral Interface).

  8. Question: Can I program MC68HC908QY2CPE in C or assembly language?
    Answer: Yes, MC68HC908QY2CPE can be programmed using both C and assembly language, depending on your preference and requirements.

  9. Question: Is MC68HC908QY2CPE suitable for low-power applications?
    Answer: Yes, MC68HC908QY2CPE is designed to operate at low power and has various power-saving features, making it suitable for battery-powered devices.

  10. Question: Are there any development tools available for MC68HC908QY2CPE?
    Answer: Yes, there are several development tools and integrated development environments (IDEs) available that support programming and debugging of MC68HC908QY2CPE-based projects.

Please note that the answers provided here are general and may vary based on specific technical requirements and implementation details.