Microsemi Corporation
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
SMCG6069/TR13
Zobrazit detail DataSheets

SMCG6069/TR13

Product Overview

Category: Semiconductor
Use: Rectifier Diode
Characteristics: High efficiency, fast switching
Package: DO-214AB
Essence: Silicon rectifier diode
Packaging/Quantity: Tape & Reel, 3000 units

Specifications

  • Voltage - DC Reverse (Vr) (Max): 60V
  • Current - Average Rectified (Io): 2A
  • Voltage - Forward (Vf) (Max) @ If: 900mV @ 2A
  • Speed: Fast recovery =< 500ns, > 200mA (Io)
  • Operating Temperature: -65°C ~ 175°C

Detailed Pin Configuration

The SMCG6069/TR13 has a standard DO-214AB package with two pins. The anode is connected to pin 1 and the cathode to pin 2.

Functional Features

  • High efficiency
  • Fast switching
  • Low forward voltage drop
  • High current capability

Advantages and Disadvantages

Advantages: - Fast recovery time - High reliability - Low power loss

Disadvantages: - Sensitive to reverse voltage spikes - Limited maximum voltage rating

Working Principles

The SMCG6069/TR13 operates as a rectifier diode, allowing current to flow in one direction only. When forward biased, it conducts current with a low voltage drop, making it suitable for high-speed switching applications.

Detailed Application Field Plans

The SMCG6069/TR13 is commonly used in: - Switching power supplies - Freewheeling diodes - Polarity protection circuits - Snubber circuits

Detailed and Complete Alternative Models

  • 1N5822
  • FR207
  • 1N4004
  • UF4007

This concludes the entry for SMCG6069/TR13, covering its product details, specifications, features, and application information.

[Word Count: 274]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací SMCG6069/TR13 v technických řešeních

  1. What is SMCG6069/TR13?

    • SMCG6069/TR13 is a type of TVS (transient voltage suppressor) diode that is designed to protect electronic circuits from voltage spikes and transients.

  2. What are the key features of SMCG6069/TR13?

    • The key features of SMCG6069/TR13 include its low clamping voltage, fast response time, high surge capability, and compatibility with automated placement equipment.

  3. How does SMCG6069/TR13 protect electronic circuits?

    • SMCG6069/TR13 diverts excessive voltage away from sensitive components by providing a low-impedance path to ground, thus preventing damage from transient events.

  4. In what technical solutions can SMCG6069/TR13 be used?

    • SMCG6069/TR13 can be used in various technical solutions such as power supplies, automotive electronics, industrial control systems, and telecommunications equipment.

  5. What are the recommended operating conditions for SMCG6069/TR13?

    • The recommended operating conditions for SMCG6069/TR13 typically include a maximum working voltage, operating temperature range, and peak pulse current rating.

  6. How do I select the right SMCG6069/TR13 for my application?

    • Selecting the right SMCG6069/TR13 involves considering factors such as the maximum working voltage, peak pulse current, package type, and environmental conditions.

  7. Are there any application notes or design guidelines available for using SMCG6069/TR13?

    • Yes, manufacturers often provide application notes and design guidelines to assist engineers in integrating SMCG6069/TR13 into their technical solutions.

  8. What are the potential failure modes of SMCG6069/TR13?

    • Potential failure modes of SMCG6069/TR13 may include thermal runaway, excessive leakage current, or physical damage due to overvoltage events.

  9. Can SMCG6069/TR13 be used in high-frequency applications?

    • SMCG6069/TR13 can be used in high-frequency applications, but it's important to consider its capacitance and parasitic effects on signal integrity.

  10. Where can I purchase SMCG6069/TR13 and obtain technical support?

    • SMCG6069/TR13 can be purchased from authorized distributors or directly from the manufacturer, who can also provide technical support and application assistance.