Microsemi Corporation
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MXP6KE9.1CA
Zobrazit detail DataSheets

MXP6KE9.1CA - Product Overview and Analysis

Introduction

The MXP6KE9.1CA is a crucial component in the field of electronic devices, providing essential protection against transient voltage spikes. This entry will provide a comprehensive overview of the MXP6KE9.1CA, including its product category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category and Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against transient voltage spikes in electronic circuits
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: DO-15
  • Essence: Safeguarding electronic components from voltage transients
  • Packaging/Quantity: Available in reels or bulk packaging

Specifications

  • Part Number: MXP6KE9.1CA
  • Peak Pulse Power: 600W
  • Breakdown Voltage: 9.1V
  • Operating Voltage: 7.78V
  • Maximum Clamping Voltage: 14.5V
  • Peak Pulse Current: 34.8A
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The MXP6KE9.1CA TVS diode has a standard DO-15 package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Transient Voltage Suppression: Rapidly clamps transient voltages to safe levels
  • Fast Response Time: Provides quick reaction to voltage spikes
  • High Surge Capability: Withstands high surge currents without degradation

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time ensures minimal impact on the protected circuit
  • High surge capability enhances reliability

Disadvantages

  • Limited to specific voltage ranges
  • Requires careful consideration of reverse standoff voltage

Working Principles

The MXP6KE9.1CA operates by diverting excessive transient current away from sensitive electronic components. When a voltage spike occurs, the TVS diode rapidly conducts, shunting the excess energy to ground and limiting the voltage across the protected circuit.

Detailed Application Field Plans

The MXP6KE9.1CA is widely used in various applications, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Several alternative models to the MXP6KE9.1CA include: - SMAJ9.0A - P6KE6.8A - 1.5KE10A - SA9.0A

In conclusion, the MXP6KE9.1CA plays a critical role in safeguarding electronic circuits from transient voltage spikes. Its high surge capability, low clamping voltage, and fast response time make it an essential component in various electronic applications.

Word Count: 410

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MXP6KE9.1CA v technických řešeních

  1. What is MXP6KE9.1CA?

    • MXP6KE9.1CA is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and transients.

  2. What is the maximum working voltage of MXP6KE9.1CA?

    • The maximum working voltage of MXP6KE9.1CA is 7.37V.

  3. What is the peak pulse power of MXP6KE9.1CA?

    • The peak pulse power of MXP6KE9.1CA is 600W.

  4. How does MXP6KE9.1CA protect electronic circuits?

    • MXP6KE9.1CA diverts excessive current away from sensitive components in the event of a voltage spike, protecting them from damage.

  5. What are the typical applications of MXP6KE9.1CA?

    • MXP6KE9.1CA is commonly used in automotive electronics, industrial equipment, and telecommunications systems for surge protection.

  6. What is the response time of MXP6KE9.1CA?

    • The response time of MXP6KE9.1CA is very fast, typically in the nanosecond range.

  7. Can MXP6KE9.1CA be used for overvoltage protection in power supplies?

    • Yes, MXP6KE9.1CA is suitable for overvoltage protection in power supplies and can help prevent damage to sensitive components.

  8. Is MXP6KE9.1CA RoHS compliant?

    • Yes, MXP6KE9.1CA is RoHS compliant, making it suitable for use in environmentally conscious designs.

  9. What is the operating temperature range of MXP6KE9.1CA?

    • The operating temperature range of MXP6KE9.1CA is typically -55°C to 175°C, making it suitable for a wide range of environments.

  10. Can MXP6KE9.1CA be used in high-frequency applications?

    • Yes, MXP6KE9.1CA can be used in high-frequency applications due to its fast response time and low capacitance.