Microsemi Corporation
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MXLP5KE13AE3
Zobrazit detail DataSheets

MXLP5KE13AE3 Product Overview

Introduction

The MXLP5KE13AE3 belongs to the category of transient voltage suppressor (TVS) diodes, which are used to protect sensitive electronic components from voltage spikes and surges. These diodes exhibit characteristics such as high surge capability, low clamping voltage, and fast response time. They are typically packaged in a small form factor and are essential for safeguarding electronic circuits from transient overvoltage events.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against voltage spikes and surges
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: Small form factor
  • Essence: Safeguarding electronic circuits
  • Packaging/Quantity: Typically available in reels or tubes, quantity varies based on manufacturer

Specifications

The MXLP5KE13AE3 TVS diode has the following specifications: - Peak Pulse Power: 5000W - Breakdown Voltage Range: 11V to 13V - Operating Temperature Range: -55°C to 175°C - Polarity: Unidirectional

Detailed Pin Configuration

The MXLP5KE13AE3 TVS diode typically features a standard axial leaded package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • High Surge Capability: Able to withstand large transient currents without degradation.
  • Low Clamping Voltage: Provides effective protection by limiting the voltage across the protected circuit.
  • Fast Response Time: Rapidly responds to transient voltage events, minimizing the risk of damage to downstream components.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Compact form factor
  • Fast response time

Disadvantages

  • Unidirectional protection only
  • Limited breakdown voltage range

Working Principles

When a transient voltage spike occurs, the MXLP5KE13AE3 TVS diode conducts current and clamps the voltage to a safe level, diverting the excess energy away from the protected circuit. This action helps prevent damage to sensitive electronic components.

Detailed Application Field Plans

The MXLP5KE13AE3 TVS diode finds application in various fields, including: - Telecommunications: Protecting communication equipment from lightning-induced surges. - Automotive Electronics: Safeguarding vehicle electronics from voltage transients. - Industrial Control Systems: Ensuring reliable operation of control and monitoring systems in industrial environments.

Detailed and Complete Alternative Models

Some alternative models to the MXLP5KE13AE3 TVS diode include: - P6KE12A: Similar peak pulse power and breakdown voltage range. - 1.5KE15CA: Higher peak pulse power and wider breakdown voltage range. - SA5.0CA: Lower peak pulse power and narrower breakdown voltage range.

In conclusion, the MXLP5KE13AE3 TVS diode offers effective protection against transient voltage events, making it an essential component in various electronic systems.

Word count: 410

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MXLP5KE13AE3 v technických řešeních

  1. What is MXLP5KE13AE3?

    • MXLP5KE13AE3 is a type of transient voltage suppressor diode used to protect electronic circuits from overvoltage transients.

  2. What are the key features of MXLP5KE13AE3?

    • The key features include a peak power dissipation of 5000W, low clamping voltage, and fast response time.

  3. In what technical solutions can MXLP5KE13AE3 be used?

    • MXLP5KE13AE3 can be used in surge protection for power supplies, telecommunications equipment, automotive electronics, and industrial control systems.

  4. How does MXLP5KE13AE3 provide overvoltage protection?

    • MXLP5KE13AE3 diverts excessive current away from sensitive components by clamping the voltage to a safe level during transient voltage events.

  5. What are the operating conditions for MXLP5KE13AE3?

    • MXLP5KE13AE3 operates within a temperature range of -55°C to 175°C and can handle transient currents up to its rated peak pulse power.

  6. Are there any specific mounting or handling considerations for MXLP5KE13AE3?

    • MXLP5KE13AE3 should be mounted close to the protected circuit and with short leads to minimize inductance. Proper ESD precautions should be taken during handling.

  7. Can MXLP5KE13AE3 be used in high-frequency applications?

    • MXLP5KE13AE3 has a fast response time and low capacitance, making it suitable for high-frequency applications such as RF and data communication systems.

  8. What are the industry standards or certifications associated with MXLP5KE13AE3?

    • MXLP5KE13AE3 may comply with industry standards such as AEC-Q101 for automotive applications and may be RoHS compliant.

  9. How does MXLP5KE13AE3 compare to other transient voltage suppressors?

    • MXLP5KE13AE3 offers higher peak power dissipation and lower clamping voltage compared to many standard TVS diodes, making it suitable for more demanding applications.

  10. Where can MXLP5KE13AE3 be sourced and purchased?

    • MXLP5KE13AE3 can be sourced from authorized distributors and manufacturers specializing in electronic components. It is available in various package types and quantities.