Microsemi Corporation
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MX15KP28AE3
Zobrazit detail DataSheets

MX15KP28AE3 Product Overview

Introduction

MX15KP28AE3 belongs to the category of transient voltage suppressor diodes (TVS diodes). These diodes are used to protect sensitive electronic components from voltage spikes and transients. They exhibit characteristics such as high surge capability, low clamping voltage, and fast response time. The package type for MX15KP28AE3 is DO-203AB, and it is available in tape and reel packaging with a quantity of 500 units per reel.

Specifications

  • Peak Pulse Power: 15,000 Watts
  • Breakdown Voltage: 28V
  • Clamping Voltage: 45.4V
  • Maximum Reverse Leakage Current: 1µA
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The MX15KP28AE3 TVS diode has a standard axial lead configuration with two leads. The anode is connected to the positive terminal, while the cathode is connected to the negative terminal.

Functional Features

  • High Surge Capability: Can withstand large transient currents without damage.
  • Low Clamping Voltage: Provides effective protection by limiting the voltage across the protected circuit.
  • Fast Response Time: Quickly responds to transient events, minimizing the risk of damage to downstream components.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes and transients.
  • High surge capability ensures reliable performance in demanding applications.
  • Fast response time provides quick reaction to transient events.

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection in complex systems.
  • Sensitive to reverse polarity connection, requiring careful installation.

Working Principles

When a transient voltage spike occurs, the MX15KP28AE3 TVS diode conducts current and clamps the voltage to a safe level, protecting the connected circuitry. This is achieved through the rapid transition of the diode into its low impedance state when subjected to a transient event.

Detailed Application Field Plans

MX15KP28AE3 is commonly used in various applications including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • MX10KP28A: Similar specifications with lower peak pulse power rating.
  • MX15KP30AE3: Higher breakdown voltage with similar peak pulse power rating.
  • MX20KP28AE3: Higher peak pulse power rating with similar breakdown voltage.

In conclusion, MX15KP28AE3 is a reliable TVS diode that offers robust transient voltage protection for a wide range of electronic applications.

Word count: 345

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MX15KP28AE3 v technických řešeních

  1. What is the maximum peak pulse power of MX15KP28AE3?

    • The maximum peak pulse power of MX15KP28AE3 is 15,000 watts.

  2. What is the breakdown voltage of MX15KP28AE3?

    • The breakdown voltage of MX15KP28AE3 is 28 volts.

  3. What are the typical applications of MX15KP28AE3 in technical solutions?

    • MX15KP28AE3 is commonly used for surge protection in high-power applications such as power supplies, industrial equipment, and automotive electronics.

  4. What is the clamping voltage of MX15KP28AE3?

    • The clamping voltage of MX15KP28AE3 is 45.7 volts at 100A.

  5. Is MX15KP28AE3 suitable for transient voltage suppression in telecommunications equipment?

    • Yes, MX15KP28AE3 is suitable for transient voltage suppression in telecommunications equipment due to its high power handling capability.

  6. What is the response time of MX15KP28AE3?

    • The response time of MX15KP28AE3 is typically less than 1 picosecond.

  7. Can MX15KP28AE3 be used for ESD protection in electronic circuits?

    • Yes, MX15KP28AE3 can be used for ESD protection in electronic circuits, especially in applications where high surge currents may be encountered.

  8. Does MX15KP28AE3 comply with industry standards for surge protection devices?

    • Yes, MX15KP28AE3 complies with industry standards such as IEC 61000-4-5 for surge protection devices.

  9. What is the operating temperature range of MX15KP28AE3?

    • MX15KP28AE3 has an operating temperature range of -55°C to +175°C, making it suitable for a wide range of environments.

  10. Are there any recommended mounting and soldering techniques for MX15KP28AE3?

    • Yes, MX15KP28AE3 should be mounted on a heat sink and soldered using appropriate techniques to ensure proper thermal management and electrical performance.