JANTXV1N3042D-1

Product Overview

Use

It is commonly used for voltage regulation and transient suppression in electronic circuits.

Characteristics

High reliability
Low leakage current
Fast response time

Package

The JANTXV1N3042D-1 is typically available in a DO-35 package.

Essence

This product is essential for protecting sensitive electronic components from voltage spikes and transients.

Packaging/Quantity

It is usually packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

Peak Pulse Power: 500 W
Breakdown Voltage: 33 V
Maximum Clamping Voltage: 53.3 V
Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The JANTXV1N3042D-1 has two pins, anode, and cathode, which are identified by their respective markings on the device.

Functional Features

Transient voltage suppression
Voltage regulation
Overvoltage protection

Advantages

High reliability
Fast response time
Low leakage current

Disadvantages

Limited power dissipation capability
Sensitive to reverse voltage polarity

Working Principles

The JANTXV1N3042D-1 operates by diverting excessive voltage away from sensitive components, thereby protecting them from damage due to transient voltage spikes.

Detailed Application Field Plans

Power supply units
Communication equipment
Automotive electronics
Industrial control systems

Detailed and Complete Alternative Models

JANTXV1N3042D
JANTXV1N3042D-2
JANTXV1N3042D-3

In conclusion, the JANTXV1N3042D-1 is a crucial semiconductor device used for voltage regulation and transient suppression in various electronic applications. Its high reliability, fast response time, and low leakage current make it a preferred choice for protecting sensitive components from voltage spikes and transients. While it has limitations in power dissipation and reverse voltage sensitivity, its functional features and wide application field plans make it an indispensable component in modern electronic circuits.

[Word count: 324]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací JANTXV1N3042D-1 v technických řešeních

What is the JANTXV1N3042D-1 diode used for?
- The JANTXV1N3042D-1 diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.
What are the key specifications of the JANTXV1N3042D-1 diode?
- The JANTXV1N3042D-1 diode typically has a maximum repetitive peak reverse voltage of 200V, a forward current of 3A, and a low forward voltage drop.
How does the JANTXV1N3042D-1 diode provide surge protection?
- The JANTXV1N3042D-1 diode can handle transient overvoltage conditions by quickly conducting excess current away from sensitive components, protecting them from damage.
In what types of technical solutions is the JANTXV1N3042D-1 diode commonly used?
- The JANTXV1N3042D-1 diode is often used in power supplies, voltage regulators, motor drives, and other electronic systems requiring robust diode performance.
What are the temperature and storage requirements for the JANTXV1N3042D-1 diode?
- The JANTXV1N3042D-1 diode is typically rated for operation within a temperature range of -65°C to +175°C and should be stored in a dry environment at room temperature.
Does the JANTXV1N3042D-1 diode require any special mounting considerations?
- The JANTXV1N3042D-1 diode may require proper heat sinking or thermal management to ensure optimal performance, especially in high-power applications.
Can the JANTXV1N3042D-1 diode be used in automotive applications?
- Yes, the JANTXV1N3042D-1 diode is suitable for use in automotive electronics, provided it meets the specific requirements and standards for automotive-grade components.
What are the typical failure modes of the JANTXV1N3042D-1 diode?
- Common failure modes include thermal overstress, reverse voltage breakdown, and excessive forward current leading to junction failure.
Are there any recommended circuit protection measures when using the JANTXV1N3042D-1 diode?
- It is advisable to incorporate additional circuit protection such as fuses, transient voltage suppressors, or current-limiting resistors to enhance the reliability of the overall system.
Where can I find detailed application notes and guidelines for using the JANTXV1N3042D-1 diode in technical solutions?
- Detailed application notes and guidelines for the JANTXV1N3042D-1 diode can typically be found in the product datasheet, manufacturer's application guides, or technical support resources.