Microsemi Corporation
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
5KP5.0E3/TR13
Zobrazit detail DataSheets

5KP5.0E3/TR13 Product Overview

Introduction

The 5KP5.0E3/TR13 is a high-performance transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides a comprehensive overview of the 5KP5.0E3/TR13, including its product category, basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category

The 5KP5.0E3/TR13 belongs to the TVS diode category, specifically designed for surge protection in various electronic applications.

Basic Information Overview

  • Use: Surge protection against transient voltage events
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: DO-201AD (DO-27), SMA
  • Essence: Provides robust protection for sensitive electronic components
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Peak Pulse Power: 5000W
  • Standoff Voltage: 5.0V
  • Breakdown Voltage: 6.40V - 7.10V
  • Maximum Clamping Voltage: 9.2V at 16.7A
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 5KP5.0E3/TR13 TVS diode features a standard two-pin configuration with anode and cathode connections. The physical layout and pin configuration are as follows: - Anode (A) - Pin 1 - Cathode (K) - Pin 2

Functional Features

  • High Surge Capability: Capable of handling large surge currents to protect downstream components.
  • Low Clamping Voltage: Provides effective suppression of transient voltages while limiting the voltage across the protected circuit.
  • Fast Response Time: Rapid reaction to transient events ensures minimal impact on the protected system.

Advantages and Disadvantages

Advantages

  • Robust surge protection for sensitive electronics
  • Low clamping voltage for enhanced protection
  • Fast response time to transient events

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful consideration of installation and placement for optimal performance

Working Principles

The 5KP5.0E3/TR13 operates based on the principle of avalanche breakdown, where it rapidly conducts excess current when subjected to a transient voltage event, diverting the energy away from the protected circuit.

Detailed Application Field Plans

The 5KP5.0E3/TR13 is widely used in various applications, including: - Telecommunication equipment - Industrial control systems - Automotive electronics - Power supplies - Consumer electronics

Detailed and Complete Alternative Models

Several alternative models to the 5KP5.0E3/TR13 include: - 5KP6.0E3/TR13 - 5KP7.0E3/TR13 - 5KP8.0E3/TR13 - 5KP9.0E3/TR13

In conclusion, the 5KP5.0E3/TR13 TVS diode offers robust surge protection, low clamping voltage, and fast response time, making it an essential component in safeguarding sensitive electronic equipment from transient voltage events.

[Word count: 465]

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 5KP5.0E3/TR13 v technických řešeních

Sure, here are 10 common questions and answers related to the application of 5KP5.0E3/TR13 in technical solutions:

  1. What is the maximum peak pulse power of 5KP5.0E3/TR13?

    • The maximum peak pulse power is 5000 watts.

  2. What is the breakdown voltage of 5KP5.0E3/TR13?

    • The breakdown voltage is 5.0 volts.

  3. What type of diode is 5KP5.0E3/TR13?

    • It is a transient voltage suppressor (TVS) diode.

  4. What are the typical applications of 5KP5.0E3/TR13?

    • It is commonly used for surge protection in electronic equipment, such as power supplies, telecommunications systems, and industrial controls.

  5. What is the clamping voltage of 5KP5.0E3/TR13?

    • The clamping voltage is the voltage at which the diode begins to conduct significantly during a transient event, and for 5KP5.0E3/TR13, it is typically around 9.2 volts.

  6. How does 5KP5.0E3/TR13 protect electronic circuits?

    • It diverts excess current away from sensitive components by providing a low-impedance path to ground during transient voltage events.

  7. Can 5KP5.0E3/TR13 be used for overvoltage protection in automotive applications?

    • Yes, it can be used to protect automotive electronics from voltage transients caused by load dump and other electrical disturbances.

  8. What is the response time of 5KP5.0E3/TR13?

    • The response time is very fast, typically in the nanosecond range, providing rapid protection against voltage spikes.

  9. Is 5KP5.0E3/TR13 suitable for high-speed data lines?

    • Yes, it is suitable for protecting high-speed data lines, such as USB, Ethernet, and HDMI interfaces, from electrostatic discharge (ESD) and other transient events.

  10. What are the environmental considerations for using 5KP5.0E3/TR13?

    • It is important to consider the operating temperature range and compliance with RoHS and REACH directives when using 5KP5.0E3/TR13 in technical solutions.

I hope these questions and answers are helpful for your technical solutions involving 5KP5.0E3/TR13! If you have any more specific questions, feel free to ask.