1N1202B

Product Overview

Use

It is commonly used as a rectifier in electronic circuits, converting alternating current (AC) to direct current (DC).

Characteristics

Forward Voltage: 1V
Reverse Voltage: 100V
Current Rating: 1A
Fast switching speed

Package

The 1N1202B is typically available in a DO-41 package.

Essence

This diode is essential for converting AC to DC in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes and is available in quantities ranging from hundreds to thousands.

Specifications

Forward Voltage: 1V
Reverse Voltage: 100V
Average Rectified Current: 1A
Maximum Surge Current: 30A
Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The 1N1202B has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

High current capability
Fast switching speed
Low forward voltage drop

Advantages

Reliable and durable
Fast response time
Suitable for high-frequency applications

Disadvantages

Higher forward voltage compared to Schottky diodes
Limited reverse voltage rating

Working Principles

The 1N1202B operates based on the principle of unidirectional conduction, allowing current to flow in only one direction when it is forward-biased.

Detailed Application Field Plans

The 1N1202B is widely used in: - Power supplies - Battery chargers - LED lighting - Switching power converters

Detailed and Complete Alternative Models

Some alternative models to the 1N1202B include: - 1N4001 - 1N4148 - 1N5819 - 1N5399

In conclusion, the 1N1202B is a versatile semiconductor diode with a wide range of applications in electronic circuits, offering reliable performance and fast switching characteristics.

Word Count: 314

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 1N1202B v technických řešeních

What is 1N1202B?
- 1N1202B is a silicon rectifier diode commonly used in electronic circuits for converting alternating current (AC) to direct current (DC).
What are the key specifications of 1N1202B?
- The 1N1202B diode has a maximum repetitive peak reverse voltage of 200 volts, a maximum average forward rectified current of 1 ampere, and a forward voltage drop of approximately 1 volt at 1 ampere.
How is 1N1202B typically used in technical solutions?
- 1N1202B is often used in power supply circuits, voltage regulators, and other applications where AC to DC conversion is required.
What are the typical operating conditions for 1N1202B?
- The diode operates within a temperature range of -65°C to +175°C and should be operated within its specified voltage and current ratings to ensure proper functionality.
Can 1N1202B be used in high-frequency applications?
- No, 1N1202B is not suitable for high-frequency applications due to its relatively slow recovery time.
Are there any common failure modes associated with 1N1202B?
- Common failure modes include overvoltage stress, excessive forward current, and thermal overstress, which can lead to degradation or failure of the diode.
What are some alternative diodes that can be used in place of 1N1202B?
- Alternatives include 1N4001, 1N4004, and 1N4007 diodes, which have similar characteristics and can be substituted depending on the specific application requirements.
How should 1N1202B be connected in a circuit?
- The diode should be connected in the correct polarity to ensure proper rectification of the AC signal, with attention to the cathode and anode connections.
What precautions should be taken when handling 1N1202B?
- Precautions include avoiding static discharge, ensuring proper heat dissipation, and adhering to the specified voltage and current limits during operation.
Where can I find detailed technical information about 1N1202B?
- Detailed technical information can be found in the datasheet provided by the manufacturer or through reputable electronics component distributors and websites.