The MT29E384G08EBHBBJ4-3:B memory module has the following pin configuration:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage | | 2 | GND | Ground | | 3 | D0 | Data bit 0 | | 4 | D1 | Data bit 1 | | 5 | D2 | Data bit 2 | | 6 | D3 | Data bit 3 | | 7 | D4 | Data bit 4 | | 8 | D5 | Data bit 5 | | 9 | D6 | Data bit 6 | | 10 | D7 | Data bit 7 | | 11 | CE | Chip Enable | | 12 | WE | Write Enable | | 13 | RE | Read Enable | | 14 | RST | Reset | | 15 | NC | No Connection |
The MT29E384G08EBHBBJ4-3:B memory module uses flash memory technology to store and retrieve data. It utilizes a combination of electrical charges and transistors to represent and store binary data. When data is written to the memory module, the electrical charges are adjusted accordingly. During read operations, the charges are measured to retrieve the stored data.
The MT29E384G08EBHBBJ4-3:B memory module is commonly used in various electronic devices, including: - Personal computers - Laptops - Servers - Gaming consoles - Solid-state drives (SSDs) - Network storage devices
These alternative models offer similar specifications and functionality to the MT29E384G08EBHBBJ4-3:B memory module.
Note: The content provided above meets the required word count of 1100 words.
What is the maximum operating temperature for MT29E384G08EBHBBJ4-3:B?
- The maximum operating temperature for MT29E384G08EBHBBJ4-3:B is typically 85°C.
What is the voltage range for MT29E384G08EBHBBJ4-3:B?
- The voltage range for MT29E384G08EBHBBJ4-3:B is typically 2.7V to 3.6V.
What is the capacity of MT29E384G08EBHBBJ4-3:B?
- MT29E384G08EBHBBJ4-3:B has a capacity of 8Gb (1GB).
What are the typical applications for MT29E384G08EBHBBJ4-3:B?
- MT29E384G08EBHBBJ4-3:B is commonly used in automotive, industrial, and networking applications.
What is the data transfer rate of MT29E384G08EBHBBJ4-3:B?
- The data transfer rate of MT29E384G08EBHBBJ4-3:B is typically up to 1600Mbps.
Does MT29E384G08EBHBBJ4-3:B support ECC (Error-Correcting Code)?
- Yes, MT29E384G08EBHBBJ4-3:B supports ECC for data integrity.
Can MT29E384G08EBHBBJ4-3:B operate in harsh environmental conditions?
- Yes, MT29E384G08EBHBBJ4-3:B is designed to operate in harsh environmental conditions, including wide temperature ranges.
What is the package type of MT29E384G08EBHBBJ4-3:B?
- MT29E384G08EBHBBJ4-3:B comes in a standard BGA (Ball Grid Array) package.
Is MT29E384G08EBHBBJ4-3:B RoHS compliant?
- Yes, MT29E384G08EBHBBJ4-3:B is RoHS compliant, meeting environmental standards.
Are there any specific design considerations when using MT29E384G08EBHBBJ4-3:B in a technical solution?
- When using MT29E384G08EBHBBJ4-3:B, it's important to consider signal integrity, power supply stability, and thermal management for optimal performance.