TC1073-3.3VCH713

Product Overview

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

Voltage Output: 3.3V
Package Type: CH713
Essence: Voltage regulator
Packaging/Quantity: Varies based on supplier

Specifications

The specifications of TC1073-3.3VCH713 are as follows:

Input Voltage Range: 4.5V to 10V
Output Voltage: 3.3V ±2%
Maximum Output Current: 250mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 50µA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of TC1073-3.3VCH713 is as follows:

VIN: Input voltage pin
GND: Ground pin
VOUT: Output voltage pin

Functional Features

Low dropout voltage
Low quiescent current
Overcurrent and thermal protection
Short-circuit protection
Reverse polarity protection

Advantages and Disadvantages

Advantages

Stable output voltage
Wide input voltage range
Low power consumption
Protection features ensure device safety

Disadvantages

Limited maximum output current
Dropout voltage may affect efficiency in low input voltage scenarios

Working Principles

TC1073-3.3VCH713 operates based on a linear voltage regulation principle. It regulates the input voltage to a stable 3.3V output voltage by dissipating excess energy as heat.

Detailed Application Field Plans

TC1073-3.3VCH713 finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to TC1073-3.3VCH713 are: - LM1117-3.3V - MCP1700-3302E/TO - AP2112K-3.3TRG1

These models offer similar voltage regulation capabilities and can be used as substitutes based on specific requirements.

In conclusion, TC1073-3.3VCH713 is a voltage regulator with a stable 3.3V output voltage, low power consumption, and various protection features. It finds applications in battery-powered devices, portable electronics, IoT devices, and embedded systems. Alternative models such as LM1117-3.3V, MCP1700-3302E/TO, and AP2112K-3.3TRG1 can also be considered for similar voltage regulation needs.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací TC1073-3.3VCH713 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of TC1073-3.3VCH713 in technical solutions:

Q: What is TC1073-3.3VCH713? A: TC1073-3.3VCH713 is a specific voltage regulator IC (integrated circuit) that provides a regulated output voltage of 3.3V.
Q: What are the typical applications of TC1073-3.3VCH713? A: TC1073-3.3VCH713 is commonly used in various electronic devices and systems where a stable 3.3V power supply is required, such as microcontrollers, sensors, and low-power digital circuits.
Q: How does TC1073-3.3VCH713 regulate the output voltage? A: TC1073-3.3VCH713 uses a feedback mechanism to maintain a constant output voltage despite changes in input voltage or load conditions.
Q: What is the input voltage range for TC1073-3.3VCH713? A: The input voltage range for TC1073-3.3VCH713 typically spans from 2.5V to 6.0V.
Q: Can TC1073-3.3VCH713 handle high current loads? A: No, TC1073-3.3VCH713 is designed for low to moderate current loads. It has a maximum output current rating, usually around 250mA.
Q: Is TC1073-3.3VCH713 suitable for battery-powered applications? A: Yes, TC1073-3.3VCH713 is often used in battery-powered devices due to its low quiescent current and efficient power conversion.
Q: Does TC1073-3.3VCH713 require any external components for operation? A: Yes, TC1073-3.3VCH713 typically requires a few external components like input/output capacitors and resistors to set the output voltage.
Q: Can TC1073-3.3VCH713 tolerate input voltage fluctuations? A: Yes, TC1073-3.3VCH713 has built-in protection features that allow it to withstand certain levels of input voltage variations without affecting the output voltage significantly.
Q: What is the efficiency of TC1073-3.3VCH713? A: The efficiency of TC1073-3.3VCH713 depends on the input-output voltage differential and load conditions but is generally around 80-90%.
Q: Are there any specific layout considerations for using TC1073-3.3VCH713? A: Yes, proper PCB layout techniques should be followed to minimize noise, ensure good thermal dissipation, and maintain stable operation of TC1073-3.3VCH713.