Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PIC32MM0064GPL036-E/MV
Zobrazit detail DataSheets

PIC32MM0064GPL036-E/MV

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, Internet of Things (IoT) devices, consumer electronics
  • Characteristics: Low power consumption, high performance, small form factor
  • Package: 36-pin QFN package
  • Essence: A powerful microcontroller designed for various applications requiring low power and high performance.
  • Packaging/Quantity: Available in tape and reel packaging, quantity depends on the supplier.

Specifications

  • Architecture: MIPS32® M4K® Core
  • CPU Speed: Up to 50 MHz
  • Flash Memory: 64 KB
  • RAM: 8 KB
  • Operating Voltage: 2.3V - 3.6V
  • Digital I/O Pins: 28
  • Analog Input Channels: 11
  • Communication Interfaces: UART, SPI, I2C, USB
  • Timers/Counters: 5
  • ADC Resolution: 10-bit
  • PWM Channels: 5
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The PIC32MM0064GPL036-E/MV microcontroller has a total of 36 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. RA6 - General-purpose I/O pin
  10. RA7 - General-purpose I/O pin
  11. RB0 - General-purpose I/O pin
  12. RB1 - General-purpose I/O pin
  13. RB2 - General-purpose I/O pin
  14. RB3 - General-purpose I/O pin
  15. RB4 - General-purpose I/O pin
  16. RB5 - General-purpose I/O pin
  17. RB6 - General-purpose I/O pin
  18. RB7 - General-purpose I/O pin
  19. RB8 - General-purpose I/O pin
  20. RB9 - General-purpose I/O pin
  21. RB10 - General-purpose I/O pin
  22. RB11 - General-purpose I/O pin
  23. RB12 - General-purpose I/O pin
  24. RB13 - General-purpose I/O pin
  25. RB14 - General-purpose I/O pin
  26. RB15 - General-purpose I/O pin
  27. RC0 - General-purpose I/O pin
  28. RC1 - General-purpose I/O pin
  29. RC2 - General-purpose I/O pin
  30. RC3 - General-purpose I/O pin
  31. RC4 - General-purpose I/O pin
  32. RC5 - General-purpose I/O pin
  33. RC6 - General-purpose I/O pin
  34. RC7 - General-purpose I/O pin
  35. RC8 - General-purpose I/O pin
  36. RC9 - General-purpose I/O pin

Functional Features

  • Low power consumption allows for extended battery life in portable devices.
  • High-performance MIPS32® M4K® Core enables efficient execution of complex tasks.
  • Multiple communication interfaces (UART, SPI, I2C, USB) facilitate connectivity with other devices.
  • Ample digital I/O pins and analog input channels provide flexibility for various applications.
  • Timers/counters and PWM channels enable precise timing and control.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life. - High-performance core allows for efficient execution of tasks. - Versatile communication interfaces enable connectivity. - Sufficient I/O pins and analog channels provide flexibility.

Disadvantages: - Limited flash memory and RAM compared to higher-end microcontrollers. - 10-bit ADC resolution may not be sufficient for some applications requiring higher precision.

Working Principles

The PIC32MM0064GPL036-E/MV microcontroller operates based on the MIPS32® M4K® Core architecture. It executes instructions stored in its flash memory, processes data, and communicates with other devices through various interfaces. The low power consumption is achieved by optimizing the core's performance and reducing unnecessary power usage.

Detailed Application Field Plans

The PIC32MM0064GPL036-E/MV microcontroller can be used in a wide range of applications, including but not limited to: - Home automation systems - Wearable devices - Industrial control systems - Smart appliances - Sensor networks - Medical devices

Alternative Models

  • PIC32MM0064GPM036-E/MV: Similar specifications but with more flash memory (128 KB) and RAM (16 KB).
  • PIC32MM0064GPI036-E/MV: Similar specifications but

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC32MM0064GPL036-E/MV v technických řešeních

  1. What is the maximum operating frequency of PIC32MM0064GPL036-E/MV?
    - The maximum operating frequency of PIC32MM0064GPL036-E/MV is 25 MHz.

  2. What are the key features of PIC32MM0064GPL036-E/MV?
    - Some key features of PIC32MM0064GPL036-E/MV include low power consumption, USB support, and a wide range of peripherals.

  3. Can PIC32MM0064GPL036-E/MV be used in battery-powered applications?
    - Yes, PIC32MM0064GPL036-E/MV is suitable for battery-powered applications due to its low power consumption.

  4. What development tools are available for programming PIC32MM0064GPL036-E/MV?
    - Development tools such as MPLAB X IDE and MPLAB Harmony software framework can be used for programming PIC32MM0064GPL036-E/MV.

  5. Is PIC32MM0064GPL036-E/MV suitable for IoT applications?
    - Yes, PIC32MM0064GPL036-E/MV is well-suited for IoT applications due to its low power consumption and USB support.

  6. What communication interfaces are supported by PIC32MM0064GPL036-E/MV?
    - PIC32MM0064GPL036-E/MV supports interfaces such as SPI, I2C, UART, and USB.

  7. Can PIC32MM0064GPL036-E/MV be used in industrial control systems?
    - Yes, PIC32MM0064GPL036-E/MV is suitable for industrial control systems due to its robust features and peripherals.

  8. What is the memory configuration of PIC32MM0064GPL036-E/MV?
    - PIC32MM0064GPL036-E/MV has 64 KB of flash memory and 8 KB of SRAM.

  9. Are there any application notes or reference designs available for PIC32MM0064GPL036-E/MV?
    - Yes, Microchip provides application notes and reference designs to assist with the implementation of PIC32MM0064GPL036-E/MV in various technical solutions.

  10. What are the recommended operating conditions for PIC32MM0064GPL036-E/MV?
    - The recommended operating voltage for PIC32MM0064GPL036-E/MV is 2.3V to 3.6V, and the temperature range is -40°C to 85°C.