Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PIC24HJ128GP206AT-I/MR
Zobrazit detail DataSheets

PIC24HJ128GP206AT-I/MR

Product Overview

Category

The PIC24HJ128GP206AT-I/MR belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.

Characteristics

  • High-performance 16-bit architecture
  • Large memory capacity
  • Low power consumption
  • Enhanced connectivity options
  • Advanced peripherals for versatile applications

Package

The PIC24HJ128GP206AT-I/MR is available in a compact surface mount package, allowing for easy integration into circuit boards.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of applications.

Packaging/Quantity

The PIC24HJ128GP206AT-I/MR is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller Family: PIC24H
  • Core Size: 16-bit
  • Program Memory Size: 128 KB
  • RAM Size: 8 KB
  • Number of I/O Pins: 35
  • Operating Voltage Range: 2.5V to 5.5V
  • Maximum Speed: 40 MHz
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC) Channels: 10
  • Timers/Counters: 6
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC24HJ128GP206AT-I/MR has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. RB8 - General-purpose I/O pin
  18. RB9 - General-purpose I/O pin
  19. RB10 - General-purpose I/O pin
  20. RB11 - General-purpose I/O pin
  21. RB12 - General-purpose I/O pin
  22. RB13 - General-purpose I/O pin
  23. RB14 - General-purpose I/O pin
  24. RB15 - General-purpose I/O pin
  25. VCAP - Capacitor connection for internal voltage regulator
  26. AVDD - Analog power supply voltage
  27. AVSS - Analog ground
  28. AN0 - Analog input channel
  29. AN1 - Analog input channel
  30. AN2 - Analog input channel
  31. AN3 - Analog input channel
  32. AN4 - Analog input channel
  33. AN5 - Analog input channel
  34. AN6 - Analog input channel
  35. AN7 - Analog input channel

Functional Features

The PIC24HJ128GP206AT-I/MR offers a range of functional features that enhance its versatility and performance:

  • High-speed processing capabilities
  • Ample program memory for complex applications
  • Multiple communication interfaces for seamless connectivity
  • Advanced analog-to-digital conversion for precise measurements
  • Rich set of timers/counters for accurate timing control
  • Flexible I/O pins for interfacing with external devices
  • Low power consumption for energy-efficient operation

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities suitable for demanding applications
  • Ample memory capacity for storing complex algorithms and data
  • Versatile communication interfaces for seamless integration with other devices
  • Advanced analog features for precise measurements
  • Wide operating voltage range for compatibility with various power sources

Disadvantages

  • Relatively higher cost compared to lower-end microcontrollers
  • Steeper learning curve due to the complexity of the device
  • Limited availability of alternative models with similar specifications

Working Principles

The PIC24HJ128GP206AT-I/MR operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory, interacts with peripherals and external devices through its I/O pins, and performs calculations and data processing tasks to fulfill the requirements of the application it is used in.

Detailed Application Field Plans

The PIC24HJ128GP206AT-I/MR

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC24HJ128GP206AT-I/MR v technických řešeních

  1. What is the maximum operating frequency of PIC24HJ128GP206AT-I/MR?

    • The maximum operating frequency of PIC24HJ128GP206AT-I/MR is 40 MHz.

  2. What are the key features of PIC24HJ128GP206AT-I/MR?

    • PIC24HJ128GP206AT-I/MR features 128 KB of flash memory, 8 KB of RAM, and a variety of communication interfaces such as UART, SPI, and I2C.

  3. Can PIC24HJ128GP206AT-I/MR be used in battery-powered applications?

    • Yes, PIC24HJ128GP206AT-I/MR has low power consumption and can be used in battery-powered applications.

  4. What development tools are available for programming PIC24HJ128GP206AT-I/MR?

    • Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming PIC24HJ128GP206AT-I/MR.

  5. Does PIC24HJ128GP206AT-I/MR support real-time clock (RTC) functionality?

    • Yes, PIC24HJ128GP206AT-I/MR supports real-time clock (RTC) functionality for timekeeping applications.

  6. What are the available communication interfaces on PIC24HJ128GP206AT-I/MR?

    • PIC24HJ128GP206AT-I/MR supports UART, SPI, I2C, and USB communication interfaces.

  7. Is PIC24HJ128GP206AT-I/MR suitable for motor control applications?

    • Yes, PIC24HJ128GP206AT-I/MR is suitable for motor control applications due to its high performance and peripheral support.

  8. Can PIC24HJ128GP206AT-I/MR be used in industrial automation systems?

    • Yes, PIC24HJ128GP206AT-I/MR is well-suited for industrial automation systems with its robust features and communication capabilities.

  9. What are the temperature specifications for PIC24HJ128GP206AT-I/MR?

    • PIC24HJ128GP206AT-I/MR has an operating temperature range of -40°C to 125°C.

  10. Are there any application notes or reference designs available for PIC24HJ128GP206AT-I/MR?

    • Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC24HJ128GP206AT-I/MR in technical solutions.