Viz Specifikace pro podrobnosti o produktu.
PIC24F08KA102-I/SS
Product Overview
Category
The PIC24F08KA102-I/SS belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.
Characteristics
- High-performance 16-bit architecture
- Low power consumption
- Enhanced connectivity options
- Rich set of peripherals
- Ample memory capacity
Package
The PIC24F08KA102-I/SS comes in a SSOP package, which stands for Shrink Small Outline Package. This package offers a compact size and allows for easy integration into different circuit designs.
Essence
The essence of the PIC24F08KA102-I/SS lies in its ability to provide efficient control and processing capabilities in a small form factor.
Packaging/Quantity
This microcontroller is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of units. The exact packaging and quantity may vary depending on the supplier.
Specifications
- Microcontroller core: PIC24F
- CPU speed: Up to 16 MIPS
- Flash memory: 8 KB
- RAM: 512 bytes
- Operating voltage: 2.0V to 3.6V
- Digital I/O pins: 20
- Analog input channels: 12
- Communication interfaces: UART, SPI, I2C
- Timers: 4
- ADC resolution: 10-bit
- Temperature range: -40°C to +85°C
Detailed Pin Configuration
The PIC24F08KA102-I/SS has a total of 28 pins. Here is the detailed pin configuration:
- VDD - Power supply voltage
- VSS - Ground
- RA0 - General-purpose I/O pin
- RA1 - General-purpose I/O pin
- RA2 - General-purpose I/O pin
- RA3 - General-purpose I/O pin
- RA4 - General-purpose I/O pin
- RA5 - General-purpose I/O pin
- MCLR - Master Clear input
- VCAP - Capacitor connection for internal voltage regulator
- RB0 - General-purpose I/O pin
- RB1 - General-purpose I/O pin
- RB2 - General-purpose I/O pin
- RB3 - General-purpose I/O pin
- RB4 - General-purpose I/O pin
- RB5 - General-purpose I/O pin
- RB6 - General-purpose I/O pin
- RB7 - General-purpose I/O pin
- RB8 - General-purpose I/O pin
- RB9 - General-purpose I/O pin
- RB10 - General-purpose I/O pin
- RB11 - General-purpose I/O pin
- RB12 - General-purpose I/O pin
- RB13 - General-purpose I/O pin
- RB14 - General-purpose I/O pin
- RB15 - General-purpose I/O pin
- VSS - Ground
- VDD - Power supply voltage
Functional Features
The PIC24F08KA102-I/SS offers the following functional features:
- High-speed processing capabilities
- Flexible digital and analog I/O options
- Multiple communication interfaces for data exchange
- On-chip peripherals for various applications
- Low power consumption for energy-efficient designs
- Robust and reliable operation in harsh environments
Advantages and Disadvantages
Advantages
- Powerful performance with 16-bit architecture
- Compact size for space-constrained designs
- Wide operating voltage range for flexibility
- Ample memory capacity for storing program code and data
- Enhanced connectivity options for seamless integration
Disadvantages
- Limited number of I/O pins compared to some other microcontrollers
- Higher cost compared to lower-end microcontrollers with similar specifications
Working Principles
The PIC24F08KA102-I/SS operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its memory to perform various tasks, such as data processing, control operations, and communication with external devices. The microcontroller's core processes these instructions at high speed, enabling efficient operation of the connected system.
Detailed Application Field Plans
The PIC24F08KA102-I/SS finds applications in a wide range of fields, including:
- Industrial automation: Control systems, motor drives, and monitoring devices.
- Consumer electronics: Home appliances, gaming consoles, and audio/video equipment.
- Automotive: Engine control units, dashboard displays, and infotainment systems.
- Medical devices: Patient monitoring systems, diagnostic equipment, and medical instruments.
- Internet of Things (IoT): Smart home devices, wearable technology, and sensor networks.
Detailed and Complete Alternative Models
If the PIC24F
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC24F08KA102-I/SS v technických řešeních
What is the maximum operating frequency of PIC24F08KA102-I/SS?
- The maximum operating frequency of PIC24F08KA102-I/SS is 16 MHz.What are the key features of PIC24F08KA102-I/SS?
- Some key features of PIC24F08KA102-I/SS include 8 KB of flash memory, 512 bytes of RAM, and multiple communication interfaces.Can PIC24F08KA102-I/SS be used in battery-powered applications?
- Yes, PIC24F08KA102-I/SS is suitable for battery-powered applications due to its low power consumption.What development tools are available for programming PIC24F08KA102-I/SS?
- Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming PIC24F08KA102-I/SS.Is PIC24F08KA102-I/SS suitable for motor control applications?
- Yes, PIC24F08KA102-I/SS is well-suited for motor control applications due to its integrated peripherals and high performance.Can PIC24F08KA102-I/SS be used in industrial automation systems?
- Yes, PIC24F08KA102-I/SS is commonly used in industrial automation systems due to its robust features and reliability.What communication interfaces does PIC24F08KA102-I/SS support?
- PIC24F08KA102-I/SS supports communication interfaces such as UART, SPI, and I2C for seamless connectivity.Is PIC24F08KA102-I/SS compatible with other microcontrollers or devices?
- Yes, PIC24F08KA102-I/SS is designed to be compatible with a wide range of microcontrollers and peripheral devices.What are the temperature specifications for PIC24F08KA102-I/SS?
- PIC24F08KA102-I/SS has a wide operating temperature range from -40°C to 125°C, making it suitable for various environments.Are there any application notes or reference designs available for PIC24F08KA102-I/SS?
- Yes, Microchip provides comprehensive application notes and reference designs to assist in the implementation of PIC24F08KA102-I/SS in technical solutions.